Sunny Health & Fitness PERFORMANCE INTERACTIVE Series User manual

PERFORMANCE INTERACTIVE SERIES
RECUMBENT ELLIPTICAL
SF-RBE420035
USER MANUAL
English, pages 1~16 IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US:
[email protected] or 1-877-90SUNNY (877-907-8669).
Español, páginas 17~32 IMPORTANTE Por favor, conserve el manual del propietario para las instrucciones de
mantenimiento y ajuste. Su satisfacción es muy importante para nosotros, POR FAVOR NO
DEVUELVA EL PRODUCTO HASTA QUE SE HAYA COMUNICADO CON NOSOTROS:
[email protected] o 1-877-90SUNNY (877-907-8669).
Français, pages 33~48 IMPORTANT ! Veuillez conserver le manuel du propriétaire pour les instructions d'entretien et de
réglage. Votre satisfaction est très importante pour nous, VEUILLEZ NE PAS RETOURNER
AVANT DE NOUS AVOIR CONTACTE : [email protected] ou 1-877-90SUNNY
(877-907-8669).
Deutsch, seiten 49~64 WICHTIG! Bitte bewahren Sie das Benutzerhandbuch für Wartungs- und Einstellanweisungen auf.
Ihre Zufriedenheit ist uns sehr wichtig. BITTE SENDEN SIE NICHT ZURÜCK, BEVOR SIE UNS
KONTAKTIERT HABEN: [email protected] oder 1-877-90SUNNY
(877-907-8669).
Italiano, pagine 65~80 IMPORTANTE! Conservare il manuale d'uso per le istruzioni di manutenzione e regolazione. La
vostra soddisfazione èmolto importante per noi, VI PREGO DI NON RESTITUIRE IL PRODOTTO
PRIMA DI AVERCI CONTATTATO: [email protected] o 1-877-90SUNNY
(877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained,
and used properly. It is your responsibility to ensure that all users of the equipment are informed of
all warnings and precautions.
1. Before starting any exercise program, you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk or prevent
you from using the equipment properly. Your physician’s advice is essential if you are taking
medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If
you do experience any of these conditions, you should consult your physician before continuing
with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 4 feet (120 cm) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 265 lbs (120 kgs).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in cool and dry conditions. You should avoid storage in extreme
cold, hot or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

2
PRE-ASSEMBLY CHECK LIST
Before you start to assemble, please make sure all parts are included.
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
1
Main Frame
1
40
Long Axle
Φ19x386
1
2L
Left Pedal Support
Tube
1
48
Nut Cap
S19
2
2R
Right Pedal Support
Tube
1
49L
Left Swing Bar
1
3L
Left Pedal
1
49R
Right Swing Bar
1
3R
Right Pedal
1
50
Nut Cap
S13
2
4
Handlebar Post
1
51a
Protective Cover A
2
5L
Left Handlebar
1
51b
Protective Cover B
2
5R
Right Handlebar
1
52
Seat
1
7
Seat Rail
1
53
Backrest
1
10
Front Stabilizer
1
54
Adjustable Pad
M10x30
1
11
Rear Stabilizer
1
A
Hardware Package
1
12
Rear Handlebar
1
B
Manual
1
13
Adjustable Handle
1
C
Thank You Card
1
14
Meter
TZ4112
1
D
Battery
AAA
2
27
Hex Nut
M10
1

3
HARDWARE PACKAGE
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓The model number (found on cover of manual)
✓The product name (found on cover of manual)
✓The part number found on the “EXPLODED DIAGRAM” (page 81) and “PARTS LIST” (pages
15-16)
Please contact us at [email protected] or 1-877-90SUNNY (877-907-8669).

4
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 1:
Remove 2 Paper Tubes (No. E), 4 Carriage
Bolts (No. 16), 4 Arc Washers (No. 36) and
4Cap Nuts (No. 29) from the Main Frame
(No. 1) with Spanner (No. 122).
NOTE: You may discard the Paper Tubes
(No. E) or save them to repackage the item
in the future.
Attach Adjustable Pad (No. 54) to the Main
Frame (No. 1).
Attach the Front Stabilizer (No. 10)and the
Rear Stabilizer (No. 11) to the Main Frame
(No. 1) with 4 Carriage Bolts (No. 16), 4
Arc Washers (No. 36) and 4 Cap Nuts (No.
29) that were just removed. Tighten and
secure with Spanner (No. 122).

5
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 2:
NOTE: Make sure the Tension Controller
(No. 72a) is at the lowest level before you
connect the cable. This ensures the wires
are at their longest point. We recommend the
assistance of a second person to help hold
the Handlebar Post (No. 4). This will make
the connection easier when you are
attaching Tension Hook (No. 73) to the
Tension Cable (No. 72b).
Attach the Tension Cable (No. 72b) into the
metal bracket of Tension Hook (No. 73) as
shown in drawing A-①. Then, pull Tension
Cable (No. 72b) upward and insert it into the
slot of metal bracket of Tension Hook (No.
73) as shown in drawing A-③. Make sure the
metal fitting on Tension Cable (No. 72b) is
secured in the metal bracket.
Connect the Pulse Extension Wire 2 (No.
79) to the Pulse Extension Wire 1 (No. 76)
and connect the Sensor Extension Wire 1
(No. 77) to the Sensor Extension Wire 2
(No. 78).
Remove 4 Screws (No. 20), 4 Spring
Washers (No. 37) and 4 Arc Washers (No.
36) from the Main Frame (No. 1) using Allen
Wrench (No. 125).
Attach the Handlebar Post (No. 4) to the
Main Frame (No. 1) with 4 Screws (No. 20),
4 Spring Washers (No. 37) and 4 Arc
Washers (No. 36) that were just removed.
Tighten and secure with the Allen Wrench
(No. 125).
NOTE: Do not cut or pinch any wires when
attaching the Handlebar Post (No. 4).

6
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 3:
Remove 2 Hex Screws (No. 26), 2Spring
Washers (No. 37), 2Flat Washers (No. 33)
and 2Wave Washers (No. 57)from the
Long Axle (No. 40)using 2 Spanners (No.
122).
Insert the Long Axle (No. 40)into the
Handlebar Post (No. 4), then insert 2 Wave
Washers (No. 57)that were just removed
from both sides of Long Axle (No. 40).
Attach the Left and Right Swing Bars (No.
49L & No. 49R) to both sides of the Long
Axle (No. 40)using 2Flat Washers (No.
33), 2 Spring Washers (No. 37)and 2 Hex
Screws (No. 26)that were just removed.
Pre-secure with 2 Spanners (No. 122).
NOTE: Do not completely tighten the Hex
Screws (No. 26)yet.

7
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at suppo[email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 4:
Attach Left and Right Swing Bars (No. 49L
& No. 49R) to Left and Right Pedal Support
Tubes (No. 2L & No. 2R) with 2 Spacers (No.
19), 2 Flat Washers (No. 124) and 2Nylon
Nuts (No. 28)and pre-secure with the Open
End Wrench (No. 123).
NOTE: Please do not fully tighten at this time.
Attach the Left Pedal Support Tube (No. 2L)
to the left side of the Crank (No. 41)with 1
Left Hinge Bolt (No. 44L) and 1 Wave
Washer (No. 32). Turn the Left Hinge Bolt
(No. 44L) counter-clockwise with your hand.
Then attach 1 Spring Washer (No. 45) and 1
Left Nylon Nut (No. 46L) to the end of Left
Hinge Bolt (No. 44L) and turn the Left Nylon
Nut (No. 46L) clockwise.
Attach the Right Pedal Support Tube (No.
2R) to the right side of the Crank (No. 41)with
1 Right Hinge Bolt (No. 44R) and 1 Wave
Washer (No. 32). Turn the Right Hinge Bolt
(No. 44R) clockwise with your hand. Then
attach 1 Spring Washer (No. 45) and 1 Right
Nylon Nut (No. 46R) to the end of Right
Hinge Bolt (No. 44R) and turn the Right
Nylon Nut (No. 46R) counter-clockwise.
The Left Hinge Bolt (No. 44L) is labeled L,
while the Right Hinge Bolt (No. 44R) is
labeled R. The Left Nylon Nut (No. 46L) is
BLACK and Right Nylon Nut (No. 46R) is
WHITE.
First, fasten Left and Right Nylon Nuts (No.
46L & No. 46R) and Left and Right Hinge
Bolts (No. 44L & No. 44R) using Allen
Wrench (No. 126) and Open End Wrench
(No. 123).
Second, fasten 2 Nylon Nuts (No. 28)using
Open End Wrench (No. 123).
Then fasten 2 Hex Screws (No. 26)for STEP
3 using 2 Spanners (No. 122).
Finally, cover 2 Nut Caps (No. 50) and 2 Nut
Caps (No. 48).
NOTE: Ensure that all bolts and washers are
in place and partially threaded in before
completely tightening any of them.
NOTE: If the bike is making unusual noises
when in use, inspect the bike carefully and
tighten any loose bolts and nuts especially the
2 Nylon Nuts (No. 28).

8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at su[email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 5:
Attach Left and Right Handlebars (No. 5L
& No. 5R) to Left and Right Swing Bars
(No. 49L & No. 49R) with 4 Bolts (No. 24), 4
Arc Washers (No. 36) and 4 Cap Nuts (No.
29). Tighten and secure with Spanner (No.
122).
Remove 4 Screws (No. 31)from Left and
Right Swing Bars (No. 49L & No. 49R) and
remove 2 Screws (No. 128) from 2
Protective Covers A (No. 51a)and 2
Protective Covers B (No. 51b) using
Spanner (No. 122).
Attach the 2 Protective Covers A (No. 51a)
and 2Protective Covers B (No. 51b) to the
2 joints of the Left and Right Swing Bars
(No. 49L & No. 49R) and Left and Right
Pedal Support Tubes (No. 2L & No. 2R)
with 4 Screws (No. 31) and 2 Screws (No.
128) that were just removed. Tighten and
secure with Spanner (No. 122).
Insert Left and Right Pedals (No. 3L & No.
3R) through 2 Pedal Straps (No. 127), then
attach Left and Right Pedals (No. 3L & No.
3R) to the Left and Right Pedal Support
Tubes (No. 2L & No. 2R) using 4 Hex Bolts
(No. 15), 4 Flat Washers (No. 35) and 4
Nylon Nuts (No. 30). Tighten and secure
with Spanner (No. 122).
STEP 6:
Attach the Seat Rail (No. 7) to the Main
Frame (No. 1) with 4 Bolts (No. 21) and 4
Flat Washers (No. 35). Tighten and secure
with Allen Wrench (No. 125).
Remove 2 Screws (No. 18)from the
Adjustable Handle (No. 13) using Allen
Wrench (No. 121).
Attach the Adjustable Handle (No. 13) to
the Axle (No. 9) with 2 Screws (No. 18)that
were just removed. Tighten and secure with
Allen Wrench (No. 121).

9
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at suppo[email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 7:
Remove 1 Screw (No. 20), 1 Spring
Washer (No. 37) and 1 Flat Washer (No.
35) from the Seat Support (No. 8) using
Allen Wrench (No. 125)
Attach the Rear Handlebar (No. 12) to the
Seat Support (No. 8) with 1 Screw (No.
20), 1 Spring Washer (No. 37) and 1 Flat
Washer (No. 35) that were just removed.
Don’t tighten the Screw (No. 20) now.
Attach the Rear Handlebar (No. 12) to the
Seat Support (No. 8) with 1 Hex Bolt (No.
81), 1 Flat Washer (No. 35) and 1 Nylon
Nut (No. 30). Then tighten the Screw (No.
20) with Allen Wrench (No. 125) and
tighten the Hex Bolt (No. 81) with Spanner
(No. 122) at the same time.
Connect the Pulse Extension Wire 1 (No.
76)to the Pulse Wire (No. 75).
Attach the Seat (No. 52) to the Seat
Support (No. 8) with 4 Flat Washers (No.
35)and 4 Screws (No. 20). Tighten and
secure with Allen Wrench (No. 125).
Attach the Backrest (No. 53) to the Seat
Support (No. 8) with 2 Flat Washers (No.
35) and 2 Bolts (No. 17) using Allen
Wrench (No. 121).

10
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at suppo[email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 8
Remove 4 Screws (No. 34) from the Meter
(No. 14) with Spanner (No. 122).
Connect the Pulse Extension Wire 2 (No.
79)with Meter Wire A (No. 14a) and
connect the Sensor Extension Wire 2 (No.
78) with Meter Wire B (No. 14b).
Attach the Meter (No. 14)to the bracket of
the Handlebar Post (No. 4) with 4 Screws
(No. 34) that were just removed using
Spanner (No. 122).
The assembly is complete!

11
ADJUSTMENT GUIDE
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride,
you must ensure that the recumbent elliptical is
stable and secure. If you notice that the recumbent
elliptical is unbalanced during use, you should adjust
the Rear End Caps (No. 56) located on the rear
stabilizer until the recumbent elliptical becomes
levelled with the floor surface.
ADJUSTING THE SEAT
To move the Seat (No. 52) forward or backward,
while seated on the recumbent elliptical, put your
feet on the floor. Shift the Adjustable Handle (No.
13) down to loosen. Adjust the Seat (No. 52) to your
desired position, then shift the Adjustable Handle
(No. 13)up to secure.
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension
Controller (No. 72a) clockwise to increase the level
of resistance. Rotate the Tension Controller (No.
72a) counter-clockwise to decrease the level of
resistance.
Tension levels are set at Level 1 being the lowest
and Level 8 being the highest.
PEDAL ADJUSTMENT
The pedal strap is adjustable and can be
personalized to fit the user’s foot size.
MOVING THE RECUMBENT ELLIPTICAL
Lift the recumbent elliptical by the Rear Stabilizer
(No. 11)until the Transportation Wheels (No. 71)
touch the ground. With the Transportation Wheels
(No. 71)on the ground, you can transport the
recumbent elliptical to the desired location with ease.

12
BATTERY INSTALLATION & REPLACEMENT
BATTERY INSTALLATION
1. Take out 2 AAA batteries from meter box.
2. Press the buckle of battery cover on the Meter (No. 14), then remove battery cover.
3. Install 2 AAA batteries into the battery case on the back of the Meter (No. 14). Pay attention to
the battery + and –poles before installing.
4. Press the buckle of battery cover, then put the battery cover back to the back of the Meter (No.
14).
The installation is complete!
BATTERY REPLACEMENT
1. Press the buckle of battery cover on the back of the Meter (No. 14), then remove battery cover.
2. Remove the 2 old AAA batteries in the battery case and install 2 new AAA batteries into the
battery case on the back of the Meter (No. 14). Pay attention to the battery + and –poles before
installing.
3. Press the buckle of battery cover, then put the battery cover back to the back of the Meter (No.
14).
The replacement is complete!
BATTERY DISPOSAL
Dispose the batteries according to the laws and regulations of your local region. Some batteries
may be recycled. When disposing or recycling, do not mix battery types.
Battery
Cover
Battery
14

13
EXERCISE METER
FUNCTION BUTTONS:
MODE: Press the button to select TMR (TIME), DST (DISTANCE),
and CAL (CALORIES) to preset.
Press the button for selection function display value on
LCD or enter after setting.
Press the button and hold for 3 seconds to reset all values
except odometer to zero.
(When user replaces the batteries, all the values will reset
to ZERO automatically).
SET: To set up the target value of TMR (TIME), DST
(DISTANCE), and CAL (CALORIES). Press the button and
hold for 2 seconds to speed up the increment.
RESET: Press the button to reset function value when setting.
Press the button and hold for 3 seconds to reset all values
except odometer to zero (When the user replaces batteries,
all the values will reset to ZERO automatically).
FUNCTIONS & OPERATIONS:
1. BATTERY INSTALLATION:
Please install 2 AAA 1.5V batteries in the battery case on the back of the meter. (Whenever
batteries are removed, all the function values will be reset to zero.)
2. AUTO ON/OFF:
Once the user begins to exercise, the meter will show the workout value automatically. After
about 4 minutes of inactivity, the meter will turn off. Odometer value does not reset to 0 when the
meter turns off. When the user starts to exercise again, the workout value of odometer will
accumulate continuously.
3. AUTO SCAN:
After the meter is powered on, press MODE button and the LCD will display all function values
from TMR (TIME) - SPD (SPEED) - DST (DISTANCE) - CAL (CALORIES) - ODO (ODOMETER)
- PUL (PULSE). Each value will be held for 6 seconds.
4. SPD (SPEED):
Displays the current training speed from 0.0 to 99.9 MPH (Miles per hour).
5. DST (DISTANCE):
Accumulates total distance from 0.00 up to 9999 M (miles). The user may preset target distance
by pressing the SET & MODE buttons. Each increment is 0.1 M (Miles).
Automatically counts down from targeting value during exercise.
6. TMR (TIME):
Accumulates total time from 00:00 up to 99:59. The user may preset target time by pressing SET
& MODE buttons. Each increment is 1 minute.
Automatically counts down from targeting value during exercise.

14
7. CAL (CALORIES):
Accumulates calories burned during training from 0.0 to 9999 (Cal). The user may also preset
the target calories before training by pressing the SET & MODE buttons. Each setting increment
is 1 Cal.
Automatically counts down from targeting value during exercise.
NOTE: This data is a rough guide which cannot be used in medical treatment.
8. ODO (ODOMETER):
Displays the total accumulated distance from 0.0 to 9999 M (miles). User can also press MODE
button to display the odometer value.
9. PUL (PULSE):
The meter will display the user's heart rate in beats per minute (BPM) during training.
NOTE: This data is a rough guide which cannot be used in medical treatment.
10. RESET:
Press the button and hold for 3 seconds to reset all values except odometer to zero.
NOTE:
1. If the meter display is abnormal, please re-install the new batteries and try again. Always change
both batteries at the same time. Do not mix battery types and do not mix old and new batteries.
2. Battery Spec: 1.5V UM-4 or AAA (2PCS).
3. Dispose the batteries safely, according to your state and regional guidelines.
APP CONNECTION:
Connect Smart Equipment to SunnyFit App:
1. Scan to download SunnyFit from the app store:
2. Ensure that the Bluetooth function is turned on from your mobile device.
3. If this is your first time using the SunnyFit app, follow the in-app instructions to register for
your free SunnyFit account and log in.
4. Begin any workout activity that matches your smart equipment, then follow the onscreen
prompts to search for and connect to your smart equipment.
5. When connected, your stats and records will be displayed at the end of your course/session,
and recorded in your account profile!
Troubleshooting:
•If you are having trouble connecting your smart equipment, visit www.sunnyfit.com/guide or
scan the QR code below:
•If you require additional support, please contact su[email protected].

15
PARTS LIST
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
1
Main Frame
1
40
Long Axle
Φ19×386
1
2L
Left Pedal Support
Tube
1
41
Crank
B0.5×20
1
2R
Right Pedal Support
Tube
1
42
Screw
M6×16
2
3L
Left Pedal
1
43
Adjusting Bolt
M6×36
1
3R
Right Pedal
1
44L
Left Hinge Bolt
Φ16×89
1
4
Handlebar Post
1
44R
Right Hinge Bolt
Φ16×89
1
5L
Left Handlebar
1
45
Spring Washer
Φ13×B2
2
5R
Right Handlebar
1
46L
Left Nylon Nut
B0.5×20
1
6
Cardan Joint
2
46R
Right Nylon Nut
B0.5×20
1
7
Seat Rail
1
47
Handle Fixed Plate
4×25×50
1
8
Seat Support
1
48
Nut Cap
S19
2
9
Axle
1
49L
Left Swing Bar
1
10
Front Stabilizer
1
49R
Right Swing Bar
1
11
Rear Stabilizer
1
50
Nut Cap
S13
2
12
Rear Handlebar
1
51a
Protective Cover A
2
13
Adjustable Handle
1
51b
Protective Cover B
2
14
Meter
TZ4112
1
52
Seat
1
14a
Meter Wire A
1
53
Backrest
1
14b
Meter Wire B
1
54
Adjustable Pad
M10×30
1
15
Hex Bolt
M8×55
4
55
Front End Cap
Φ50
2
16
Carriage Bolt
M8×65
4
56
Rear End Cap
Φ50
2
17
Bolt
M8×50
2
57
Wave Washer
D20
2
18
Screw
M6×10
2
58
Round Cap
Φ25×1.5
4
19
Spacer
D10×Φ16×6
2
59
Square Cap 1
30×30×1.5
2
20
Screw
M8×20
9
60
Square Cap 2
38×38×1.5
2
21
Bolt
M8×40
4
61
Foam Grip 1
Φ24×T3×270
2
22
Screw
ST3.5×8
4
62
Foam Grip 2
Φ24×T3×480
2
23
Screw
ST4.2×18
15
63
Plug
Φ12.5
2
24
Bolt
M8×35
4
64
Plastic Bushing
Φ24×16×Φ16.1
4
25
Screw
M8×38
2
65
Plastic Bushing
Φ26.8×28
6
26
Hex Screw
M8×20
2
66
Nylon Nut
M6
1
27
Hex Nut
M10
3
67
Set Bolt
M8×10
1
28
Nylon Nut
M10
2
68
Grip
Black
1
29
Cap Nut
M8
8
69
Bushing
80×40x1.5
2
30
Nylon Nut
M8
8
70
Upper Block
38×34×36.2
1
31
Screw
ST4.2×12
4
71
Transportation
Wheel
Φ42×Φ8×L21
2
32
Wave Washer
D17
2
72a
Tension Controller
1
33
Flat Washer
D8×Φ32×2
2
72b
Tension Cable
1
34
Screw
M5×10
4
73
Tension Hook
1150 mm
1
35
Flat Washer
D8×Φ16×1.5
18
74
Pulse Sensor
2
36
Arc Washer
Φ20×D8.5×R25
12
75
Pulse Wire
700 mm
1
37
Spring Washer
D8
7
76
Pulse Extension
Wire 1
2000 mm
1
38
Eccentric Wheel
Φ25×38
1
77
Sensor Extension
Wire 1
650 mm
1
39
Axle Spring Washer
D12
3
78
Sensor Extension
Wire 2
650 mm
1

16
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
79
Pulse Extension
Wire 2
650 mm
1
104
Locking Nut-R
Φ45×H3.5
1
80
Square Cap 3
60×30×1.5
2
105
Big Flat Washer
Φ25.2×Φ38×1
1
81
Hex Bolt
M8×60
1
106
Sensor Bracket
1
82
Arc Washer
D5
1
107
Belt
350 PJ6
1
83
Screw
M5×15
1
108
Hex Screw
M6×15
3
84
Flywheel
Φ200×40
1
109
Screw
M6×8
2
85
Bearing
6001-2RS
4
110
Screw
Φ14×Φ10×M8x20.5
1
86
Wave Washer
D12
2
111
Spring
Φ1.6×Φ15×L47.2
1
87
Bearing Fixed
Plate
72×56×1.5
2
112
Sealing Ring
Φ50
1
88
Bearing Bracket
72×56×11
2
113
Plug
Φ25×22
2
89
Spring Washer
D6
5
114
Magnetic Board
Axle
Φ12×61
1
90
Spring
Φ3.5×Φ18.5×L43.5
1
115
Magnetic Board
1
91
Hex Bolt
M5×60
1
116
Magnet
40×25×10
4
92
Hex Nut
M5
2
117
Flat Washer
D6×Φ16×1.5
3
93
Idler Wheel
Φ39×24
1
118
Flat Washer
D10×Φ14×1
1
94
Idler Wheel
Linkage
1
119
Flat Washer
D6×Φ12×1.2
2
95
Screw
M6×12
6
120
Flywheel Axle
Φ20×103
1
96
Belt Pulley
Φ220
1
121
Allen Wrench
S5
1
97L
Left Belt Cover
1
122
Spanner
S13, S14, S15
2
97R
Right Belt
Cover
1
123
Open End
Wrench
S17, S19
1
98
Crank Cover
Φ60×Φ30
2
124
Flat Washer
D10×Φ20×2
2
99
Nut
4.5×32×32
2
125
Allen Wrench
S6
1
100
Washer
Φ22.6×Φ28×2.5
1
126
Allen Wrench
S8
1
101
Locking Nut-L
Φ45×H3.5
1
127
Pedal Strap
T1.5×50×700
2
102
Open Face
Bearing
Φ45.8×8.8
2
128
Screw
ST3.5×12
2
103
Bearing
Housing
25×76×76
2

17
INFORMACIÓN IMPORTANTE SOBRE SEGURIDAD
Le agradecemos que haya elegido nuestro producto. Para garantizar su seguridad y su salud,
utilice este equipo correctamente. Es importante que lea este manual en su totalidad antes de
montar y utilizar el equipo. Sólo se puede lograr un uso seguro y eficaz si el equipo se monta, se
mantiene y se utiliza correctamente. Es su responsabilidad asegurarse de que todos los usuarios
del equipo estén informados de todas las advertencias y precauciones.
1. Antes de iniciar cualquier programa de ejercicios, debe consultar a su médico para determinar
si tiene alguna condición médica o física que pueda poner en riesgo su salud y seguridad o
impedirle utilizar el equipo adecuadamente. El consejo de su médico es esencial si está
tomando medicación que afecte a su ritmo cardíaco, presión arterial o nivel de colesterol.
2. Estéatento a las señales de su cuerpo. Un ejercicio incorrecto o excesivo puede perjudicar su
salud. Deje de hacer ejercicio si experimenta alguno de los siguientes síntomas: dolor, opresión
en el pecho, latidos irregulares del corazón, dificultad para respirar, aturdimiento, mareos o
sensación de náuseas. Si experimenta alguna de estas condiciones, debe consultar a su
médico antes de continuar con su programa de ejercicios.
3. Mantenga a los niños y a las mascotas alejados del equipo. El equipo estádiseñado para uso
exclusivo de adultos.
4. Utilice el equipo sobre una superficie sólida, plana y nivelada con una cubierta protectora para
el suelo o la alfombra. Para garantizar la seguridad, el equipo debe tener al menos 120 cm (4
pies) de espacio libre a su alrededor.
5. Asegúrese de que todas las tuercas y tornillos estén bien apretados antes de utilizar el equipo.
La seguridad del equipo sólo puede mantenerse si se examina regularmente para detectar
daños y/o desgaste.
6. Utilice siempre el equipo tal y como se indica. Si encuentra algún componente defectuoso
mientras monta o revisa el equipo, o si escucha algún ruido inusual procedente del equipo
durante el ejercicio, interrumpa inmediatamente el uso del equipo y no lo utilice hasta que el
problema haya sido subsanado.
7. Lleve ropa adecuada cuando utilice el aparato. Evite llevar ropa suelta que pueda enredarse en
el equipo.
8. No introduzca los dedos ni objetos en las partes móviles del equipo.
9. La capacidad máxima de peso de esta unidad es de 265 lbs (120 kgs).
10.El equipo no es adecuado para uso terapéutico.
11.Para evitar lesiones corporales y/o daños al producto o a la propiedad, es necesario levantar y
mover el equipo adecuadamente.
12.Su producto estádiseñado para ser utilizado en condiciones frescas y secas. Debe evitar
almacenarlo en zonas extremadamente frías, calientes o húmedas, ya que esto puede provocar
corrosión y otros problemas relacionados.
13.Este equipo estádiseñado únicamente para uso doméstico y en interiores; no estádiseñado
para uso comercial.

18
LISTA DE COMPROBACIÓN PREVIAAL MONTAJE
Antes de empezar a montar, asegúrese de que todas las piezas están incluidas.
n.º
Descripción
Espec.
Cant
n.º
Descripción
Espec.
Cant
1
Bastidor Principal
1
40
Eje Largo
Φ19x386
1
2L
Tubo de Soporte del
Pedal Izquierdo
1
48
Tapa de Tuerca
S19
2
2R
Tubo de Soporte del
Pedal Derecho
1
49L
Barra Oscilante
Izquierdo
1
3L
Pedal Izquierdo
1
49R
Barra Oscilante
Derecho
1
3R
Pedal Derecho
1
50
Tapa de Tuerca
S13
2
4
Poste del Manillar
1
51a
Cubierta Protectora A
2
5L
Manillar Izquierdo
1
51b
Cubierta Protectora B
2
5R
Manillar Derecho
1
52
Asiento
1
7
Barra del Asiento
1
53
Respaldo
1
10
Estabilizador Delantero
1
54
Almohadilla Ajustable
M10x30
1
11
Estabilizador Trasero
1
A
Paquete de Hardware
1
12
Manillar Trasero
1
B
Manual
1
13
Manillar Ajustable
1
C
Tarjeta de
Agradecimiento
1
14
Medidor
TZ4112
1
D
Batería
AAA
2
27
Tuerca Hexagonal
M10
1

19
PAQUETE DE HARDWARE
Solicitud de piezas de repuesto (sólo para clientes de EE.UU. y Canadá)
Proporcione la siguiente información para que podamos identificar con precisión la(s) pieza(s)
necesaria(s):
✓El número de modelo (se encuentra en la portada del manual)
✓Nombre del producto (en la portada del manual)
✓El número de pieza que se encuentra en el "DIAGRAMA EXPLÍCITO" (página 81) y en la
"LISTA DE PIEZAS" (páginas 31-32)
Póngase en contacto con nosotros en [email protected] o en el 1-877-90SUNNY
(877-907-8669).