Sunny Health & Fitness PEGASUS SF-T722054 User manual

0
PEGASUS CONNECTED FOLDING TREADMILL
SF-T722054
USER MANUAL
English, Pages 1~19 IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction
is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US:
[email protected] or 1-877-90SUNNY (877-907-8669).
Español, Paginas 20~38 ¡IMPORTANTE! Conserve el manual del propietario para las instrucciones de mantenimiento y ajuste. Su
satisfacción es muy importante para nosotros, NO DEVUELVA HASTA HABERNOS CONTACTADO:
[email protected] ó 1-877-90SUNNY (877-907-8669).
Français, Pages 39~57 IMPORTANT! Veuillez conserver le manuel du propriétaire pour les instructions de réglage et d’entretien.
Votre satisfaction est très importante pour nous, VEUILLEZ NE PAS EFFECTUER DE RETOUR AVANT
DE NOUS AVOIR CONTACTÉ: [email protected] ou 1-877-90SUNNY (877-907-8669).
Deutsch, Seiten 58~77 WICHTIG! Bitte bewahren Sie das Benutzerhandbuch für Wartungs- und Einstellanweisungen auf. Ihre
Zufriedenheit ist besonders wichtig für uns, BITTE SCHICKEN SIE DAS PRODUKT NICHT ZURÜCK,
BEVOR SIE SICH MIT UNS IN VERBINDUNG GESETZT HABEN: [email protected]
oder 1-877-90SUNNY (877-907-8669).
Italiano, Pagine 78~96 IMPORTANTE! Conservare il manuale d'uso per le istruzioni di manutenzione e regolazione. La vostra
soddisfazione è molto importante per noi, VI PREGO DI NON RESTITUIRE IL PRODOTTO PRIMA DI
AVERCI CONTATTATO: [email protected] o 1-877-90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INSTRUCTIONS
We thank you for choosing our product. To ensure your safety and health, please use this equipment
correctly. It is important to read this entire manual before assembling and using the equipment. Safe
and effective use can only be achieved if the equipment is assembled, maintained, and used properly.
It is your responsibility to ensure that all users of the equipment are informed of all warnings and
precautions.
1. Before starting any exercise program, you should consult your physician to determine if you have
any medical or physical condition that could put your health and safety at risk or prevent you from
using the equipment properly. Your physician’s advice is essential if you are taking medication that
affects your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do
experience any of these conditions, you should consult your physician before continuing with your
exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To
ensure safety, the equipment should have at least 8 feet (240 cm) of free space behind it and 2
feet (60 cm) on each side. Do not place the treadmill on any surface that blocks air openings. To
protect the floor or carpet from damage, place a mat under the treadmill.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the
equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or
checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become
entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 265 lbs (120 kgs).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in cool, dry conditions. You should avoid storage in extremely
cold, hot, or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only, it is not intended for commercial use!

2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the
following:
Read all instructions before using (this appliance).
DANGER – To reduce the risk of electric shock and the injury from moving parts:
Always unplug this appliance from the electrical outlet immediately after using and before cleaning or
servicing.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in
use, and before putting on or taking off parts.
2. This appliance is not intended for use by persons with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Keep children
under the age of 13 away from this machine.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments
not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the appliance to a service center for
examination and repair.
5. Do not carry this appliance by supply cord or use cord as a handle.
6. Keep the cord away from heated surfaces.
7. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair,
and the like.
8. Never drop or insert any object into any opening.
9. Do not use outdoors. Household use only.
10.Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
11.To disconnect, turn all controls to the off position, then remove plug from outlet.
12.CAUTION: Risk of Injury to Persons – To Avoid Injury, use extreme caution when stepping onto or
off of a moving belt. Read Instruction Manual Before Using.
13.Connect this appliance to a properly grounded outlet only. See Grounding Instructions.
14.REMOVE CONTROL BOX (OR KEY, OR SAFETY PIN, AS APPLICABLE) WHEN NOT IN USE,
AND STORE OUT OF REACH OF CHILDREN.
SAVE THESE INSTRUCTIONS
IMPORTANT NOTE:
The belt must be lubricated before the first use! Please see Page 6 for instructions on how to
properly apply lubricant.

3
PRE-ASSEMBLY CHECK LIST
Before you start to assemble, please make sure all parts are included.
No.
Description
Spec.
Qty.
1
Main Frame
1
11
Tablet Holder
1
A
Hardware Package
1
B
Manual
1
C
Thank You Card
1
HARDWARE PACKAGE
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓The model number (found on cover of manual)
✓The product name (found on cover of manual)
✓The part number found on the “EXPLODED DIAGRAM” (page 97) and “PARTS LIST” (page 19)
Please contact us at [email protected] or 1-877-90SUNNY (877-907-8669).

4
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at suppo[email protected] or 1-877-90SUNNY (877-907-
8669).
STEP 1:
We recommend having two people to do
the assembly.
Open the carton and remove contents.
Place the Main Frame (No. 1) on level
ground and ensure that you have a work
area that is clean and has adequate space.
STEP 2:
Take out the Magnetic Wrench (No. 7)
from the Main Frame (No. 1) as shown in
Fig. 1.
Loosen a few rotations for the 2 Inner Hex
Bolts (No. 30) using Magnetic Wrench
(No. 7).
Hold the Left & Right Upright Tubes (No.
2L & No. 2R) then lift up in the direction of
the arrow.
Secure both sides of the Left & Right
Upright Tubes (No. 2L & No. 2R) to the
Main Frame (No. 1) by tightening the 2
Inner Hex Bolts (No. 30) that were just
loosened using Magnetic Wrench (No. 7).
NOTE: Please do not completely tighten
the Inner Hex Bolts (No. 30) at this step.
Fig. 1

5
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at suppo[email protected] or 1-877-90SUNNY (877-907-
8669).
STEP 3:
Hold the Console Frame (No. 3) then lift
in the direction of the arrow.
Align the holes on the back of the
Console Frame (No. 3) with the holes on
the Left & Right Upright Tubes (No. 2L
& No. 2R) (as shown in Fig. 2), insert 2
Inner Hex Screws (No. 36), 2 Spring
Washers (No. 45) and 2 Flat Washers
(No. 68) through the holes and fasten to
secure the Console Frame (No. 3) with
the Left & Right Upright Tubes (No. 2L
& No. 2R), tighten with Magnetic Wrench
(No. 7).
NOTE: Now, fasten the 2 Inner Hex Bolts
(No. 30) from STEP 2 tightly using
Magnetic Wrench (No. 7).
STEP 4:
Insert the Tablet Holder (No. 11) into the
slot on the Console Front Cover (No. 9)
(as shown in Fig. 3), then secure with 2
Inner Hex Screws (No. 21) by using
Magnetic Wrench (No. 7).
Put the Safety Key (No. 53) on the Safety
Key Seat (No. 52).
Put back the Magnetic Wrench (No. 7) to
the Main Frame (No. 1).
The assembly is complete!
IMPORTANT NOTE!
You will need to lubricate
your treadmill before the first
use. See Page 6.
Fig. 2
Fig. 3

6
LUBRICATING THE TREADMILL
IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use.
Lubricating the Running Board (No. 18) and Running Belt (No. 17) is essential as the friction
between the two affects the life span and function of the treadmill. Inspect the Running Board (No.
18) and Running Belt (No. 17) regularly. Should you find any wear on the Running Board (No. 18),
please contact us at: [email protected].
WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or
repairing the unit.
HOW TO LUBRICATE:
1. Lift one side of the Running Belt (No. 17) and apply the lubricant in the middle of the Running
Board (No. 18). Next, start the treadmill at the lowest speed setting and allow the lubricant to
spread over the Running Board (No. 18).
2. The moving parts should turn freely and quietly. Abnormality of moving parts will affect the safety
of the equipment. Inspect and tighten bolts regularly.
3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be done
on a regular basis.
4. DO NOT LOOSEN OR MAKE ANY ADJUSTMENT TO THE RUNNING BELT WHILE APPLYING
LUBRICANT. A loose Running Belt (No. 17) will result in the runner sliding off during use, while
too tight of a Running Belt (No. 17) will negatively affect the motor’s performance and also create
more friction between the roller and Running Belt (No. 17). The most suitable tightness for the
Running Belt (No. 17) is when it is pulled out 50-75mm from the Running Board (No. 18).
The following timetable is recommended:
Light user (less than 3 hours/ week) every five months
Medium user (4-7 hours/ week) every two months
Heavy user (more than 7 hours/ week) every month

7
MAINTENANCE & CARE
General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and
maintained by dusting the components on a regular basis. Clean both sides of the Running Belt (No.
17) to prevent dust from accumulating underneath the Running Belt (No. 17). Keep your running
shoes clean so that dirt from your shoes does not wear out the Running Board (No. 18) and
Running Belt (No. 17). Clean the surface of the Running Belt (No. 17) with a clean damp cloth.
To better maintain the treadmill and prolong its life it is suggested that the treadmill be powered off for
10 minutes every 2 hours and fully powered off whenever not in use.
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 3-5 MPH to check if the Running Belt (No. 17) drifts.
If the Running Belt (No. 17) moves to
the right, turn the right adjustment bolt
¼ turn clockwise, then turn the left
adjustment bolt ¼ turn counter-
clockwise. If the Running Belt (No.
17) does not move, keep adjusting ¼
turn at a time until it centers. Refer to
Fig. 4.
If the Running Belt (No. 17) moves to
the left, turn left adjustment bolt ¼ turn
clockwise, then turn the right
adjustment bolt ¼ turn counter-
clockwise. If the Running Belt (No.
17) does not move, keep adjusting ¼
turn at a time until it centers. Refer to
Fig. 5.
Over time the Running Belt (No. 17)
will loosen. To tighten the Running
Belt (No. 17), turn the left and right
adjustment bolts one full turn
clockwise, check the tension of the
Running Belt (No. 17). Continue this
process until Running Belt (No. 17)
is at the correct tension. Make sure to
adjust both sides equally to ensure
correct Running Belt (No. 17)
alignment. Refer to Fig. 6.
Fig. 4
Fig. 5
Fig. 6

8
FOLDING INSTRUCTIONS
STEP 1:
Turn off the power before folding.
Take out the Magnetic Wrench (No. 7) from
the Main Frame (No. 1) as shown in Fig. 7
Remove 2 Inner Hex Screws (No. 21) from
the Console Rear Cover (No. 10) using
Magnetic Wrench (No. 7).
Take off the Tablet Holder (No. 11) from the
Console Rear Cover (No. 10) (as shown in
Fig. 8), and then screw the 2 Inner Hex
Screws (No. 21) back in the Console Rear
Cover (No. 10) using Magnetic Wrench
(No. 7).
Remove 2 Inner Hex Screws (No. 36), 2
Spring Washers (No. 45) and 2 Flat
Washers (No. 68) from the Left & Right
Upright Tubes (No. 2L & No. 2R) using
Magnetic Wrench (No. 7).
Hold on the Console Frame (No. 3) and
press down the Console Frame (No. 3) in
the direction of the arrow shown to the
status as shown in Fig. 9, and then screw
the 2 Inner Hex Screws (No. 36), 2 Spring
Washers (No. 45) and 2 Flat Washers (No.
68) back into the holes of Left & Right
Upright Tubes (No. 2L & No. 2R) using
Magnetic Wrench (No. 7) (as shown in Fig.
10).
STEP 2:
Loosen the 2 Inner Hex Bolts (No. 30),
then hold on the left and right handrails on
the Console Frame (No. 3) and fold down
in the direction of the arrow shown until the
treadmill is in the status as shown in Fig. 11.
Tighten the 2 Inner Hex Bolts (No. 30) and
put the Magnetic Wrench (No. 7) back in
the Main Frame (No. 1) as shown in Fig.
12.
CAUTION: Keeps hands on left and right
handrails when folding to avoid pinching!
Fig. 8
Fig. 9
Fig. 11
Fig. 12
Fig. 7
Fig. 10

9
HOW TO MOVE THE TREADMILL
There are two ways to move the treadmill. Please always remove the power cord from the Main
Frame (No. 1) before moving the treadmill.
1. You can move the treadmill when it is unfolded
by holding the 2 side tubes on the Main Frame
(No. 1) and lift the treadmill until the
Transportation Wheels (No. 19) touch the
ground. With the Transportation Wheels (No.
19) on the ground, you can transport the
treadmill to the desired location with ease.
2. You can move the treadmill when it is folded by
holding the Running Board (No. 18) with two
hands together, then lift the treadmill until the
Transportation Wheels (No. 19) touch the
ground. With the Transportation Wheels (No.
19) on the ground, you can transport the
treadmill to the desired location with ease.
ADJUSTMENT GUIDE
ADJUSTING THE BALANCE
To achieve a smooth and comfortable use, you must ensure that the treadmill is stable and
secure. If you notice that the treadmill is unbalanced during use, you should adjust the
Adjustable Pads (No. 20). There are 8 Adjustable Pads (No. 20) located beneath the Main
Frame (No. 1). Simply rotate the Adjustable Pads (No. 20) until the treadmill becomes level with
the floor surface.
To do so, loosen the Flat Nut (No. 48)on the Adjustable Pads (No. 20)by turning it clockwise
(direction A). With the Flat Nut (No. 48)loosened, rotate Adjustable Pad (No. 20) until it sits
level with the surface that the treadmill is on. When you have finished adjusting the Adjustable
Pad (No. 20), re-tighten the Flat Nut (No. 48)by turning it counter-clockwise (direction B). If
necessary, repeat this process to adjust the remaining Adjustable Pads (No. 20).