Sunny shf-rb4708 User manual

218 Turnbull Canyon Rd. City of Industry, CA 91745
support@sunnyhealthtness.com
Recumbent Bike Pedal
Assembly Guide
Assembling pedals for the SF-RB4708 Magnetic Cross Training Recumbent Bike can be simple.
Many of the small parts for this recumbent bike come pre-assembled, which can speed up the
installation process. In this guide, we will demonstrate how you can install the left and right pedals
on your recumbent exercise bike.
To complete this guide, you will not need any additional tools.
For assistance, email Sunny Health & Fitness at support @sunnyhealthtness.com.

218 Turnbull Canyon Rd. City of Industry, CA 91745
support@sunnyhealthtness.com
Bike Pedal Assembly Guide
Step One: Many Sunny Health &
Fitness machine parts come pre-
assembled to save you time during
the assembly process. To install the
pedals on the SF-RB4708, you’ll need
an alloy bushing (#29) and a spacer
(#30), which are already assembled.
The at washer (#39) is separate. See
Figure 1. Figure 1
Step Two: You will also nd that
the simple bearing (#24) is already
attached to the connecting board
(#10). See Figures 2 and 3.
Find tness advice, free workouts,
guides and more on our website at
www.sunnyhealthtness.com
Step Three: Connect the pedal to the
connecting arm through the simple
bearing. The threaded pedal insert
should face the recumbent bike. See
Figure 4.
Figure 2 Figure 3
Figure 4

218 Turnbull Canyon Rd. City of Industry, CA 91745
support@sunnyhealthtness.com
Bike Pedal Assembly Guide
Step Four: Attach the spacer (which
has the alloy bushing installed) to the
other side of the pedal. Then, slide the
at washer behind the spacer. See
Figure 5.
Figure 5
Step Five: Connect the threaded end
of the pedal into the crank. Turn the
right pedal clockwise (or the left pedal
counter-clockwise) until it is screwed
securely into the crank. See Figure 6.
Figure 6
Listen to our podcast at
www.sunnyhealthtness.com/
sunny-podcast
Note: When installing
the pedal into the
crank, screw the right
pedal clockwise and
the left pedal counter-
clockwise. Warning:
Screwing the pedals
improperly can damage
the parts.
L
R