Sunnydaze Decor 3-Tier Wall-Mount Shelf User manual

Page 1 / 3HMF-19
  
AWall Attachment Disk 4
BFrame 2
CShelf 3
DM6 x 12mm Bolt 4
EM4 x 45mm Shelf Screw 12
FM4 x 40mm Wall Screw 16
GWall Anchor 16
HHex Key 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Do not fully tighten ttings until all components are assembled. If ttings are tightened too soon, mounting
holes may not align, and parts may not easily t together.
3-TIER WALL-MOUNT SHELF
Read all assembly and care instructions carefully before using this product. Save this document for future reference.

2-PERSON
ASSEMBLY
(not included)
Phillips Screwdriver
Power Drill with
1/4" (7mm) Drill Bit
Pencil
WARNING
  — This item contains small
parts that can be swallowed by children. Keep children
away during assembly.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
07/2020

STEP 1
A: 4
B: 2
D: 4
STEP 2
STEP 3
F: 16
Page 2 / 3
ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten ttings until all components have been assembled.
STEP 4
C: 3
E: 12
HMF-19 07/2020
Mark it
Have a person hold the
shelf on the wall and use
a pencil to mark where the
anchors will go.
Drill Holes
Set shelf aside.
Use a 1/4" (7mm) drill bit
and carefully drill over the
pencil marks.
Insert Anchors
Use a Phillips screwdriver
to screw the anchors into
the holes until they are
ush with the wall.
G: 16

Page 3 / 3
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• Residential use only. Not for commercial or industrial use.
• Indoor use only. Do not use outdoors.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Do not climb on or sit on the shelves.
• Supervise children; never allow children to climb or sit on this unit as it may cause serious injury and property damage.
• Do not place liquids or hot items on the shelves.
• Never use chemical cleaning products or polishes as they may can damage the finish.
• Do not overload the shelves as doing so may cause the shelves to sag.
• Do not install unit in direct sunlight.
• Do not install near heating or cooling vents.
• Do not write on furniture without a padded barrier to protect the surface.
Care & Maintenance
To clean the shelving, a feather duster
or a dry, soft cloth is recommended.
SOAP
Remove stains with a slightly damp
cloth and mild soap. Dry with a soft
cloth to prevent water damage.
Do not clean shelving with harsh
cleansers or polish.
Do not put hot items or any liquids
directly on the furniture surface.
Do not climb or sit on the shelving unit,
doing so may cause serious injury and
property damage.
This shelving system is meant for stud
mounting. If walls are concrete, brick or
plaster, consult a professional.
HMF-19 07/2020