Sunnydaze Decor MTR-485 User manual

23499
STEEL BAR TABLE
WITH FAUX WOODGRAIN TOP
MTR-485
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
09/2022 Page 1 / 3
  
ALeg 3
BUpper Support 3
CLower Support 3
DTabletop 1
1M6x25mm Screw 12
2M6 Nut 12
3M4x16mm Screw 3
4Plastic Foot 3
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts
that can be swallowed. Keep children and pets away
during assembly.
WARNING
(not included)
Phillips Screwdriver
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully, and assembling the item soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
Save this manual for future reference.

23499 09/2022 Page 2 / 3
ASSEMBLY
STEP 1
A: 3
4: 3
STEP 2
B: 3
1: 6
2: 6
Review all steps carefully and understand assembly before beginning.
STEP 3
C: 3
1: 6
2: 6


Firmly push one Plastic Foot (4) onto the bottom of
Leg (A).

As indicated in the drawing, align three Upper
Supports (B) with the top of Legs (A) and secure
using six M6x25mm Screws (1) and six M6 Nuts (3).
Place Tabletop (D) on a soft, clean surface.
Align the mounting holes on the base with the pre-
drilled holes in the tabletop and secure using three
M4x16mm Screws (3).
Align three Lower Supports (C) with the bottom of
Legs (A) and secure using six M6x25mm Screws (1)
and six M6 Nuts (3).
STEP 4 

23499 09/2022 Page 3 / 3
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• For indoor use only.
• This product is for residential use only; institutional or commercial use will automatically void the warranty.
• Ensure all fittings are tight before use. Periodically check fittings to ensure they remain tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Never allow children to stand, climb, or hang on any part of this unit.
• Do not place hot items or liquids directly on the furniture.
• Never use chemical cleaning products or polishes as doing so may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload shelves as doing so may cause them to sag.
• Avoid long-term exposure to sunlight.
• Avoid placing the unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Use a padded barrier to protect the table surface when using writing utensils.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
Use a feather duster or a dry, soft cloth clean
this product.
SOAP

mild soap. Dry with a soft cloth to prevent water
damage.
Do not clean with harsh cleansers or furniture
polish.
Do not push or drag unit as doing so may damage
surfaces and scratch the unit.
Always remove items from the unit before moving.
Prevent damage to surfaces by wiping up
spills immediately.
Instrucciones
Instructions


Care & Maintenance