Sunnydaze Decor MERANTI WOOD FRN-682 User manual

MERANTI WOOD
FOLDING BALCONY RAILING TABLE
FRN-682
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.

Page 1 / 389737
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
02/2022
  
ADepth Bracket 2
BHanging Bracket 2
CFolding Table 1
DJCBC M6x55mm Bolt 8
EWasher 16
FWing Nut 8
GHex Key 1
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
IMPORTANT:
Only mount this unit on straight railing with minimal
distance between the handrail and baluster.
Do not install over railing that has a lip or uneven edge.

ASSEMBLY
Page 2 / 3
STEP 1 B: 2 C: 1 D: 4 E: 8
TIP: Always fully insert the hex key inside the designated
notch of the bolt.
If the hex key is not fully inside the notch, the hex key could
slip out, causing damage to the bolt head. Repeated hex key
slipping will cause the notch to become rounded, making it
di󰀩cult or impossible to tighten the bolt with the hex key.
• Align the mounting slide of Depth Bracket (A) with the
hanging bracket and loosely secure using two JCBC
M6x55mm Bolts (D), four Washers (E), and two Wing
Nuts (F) as shown.
• Repeat to connect the remaining depth bracket.
Do not fully tighten hardware until after the table is installed.
89737 02/2022
STEP 2 A: 2 D: 4 E: 8 F: 4
INSTALLATION
• Lay Folding Table (C) face-down on a soft, clean surface.
• Align the bottom mounting holes on the long side of
Hanging Bracket (B) with the mounting holes on the
folding table and loosely secure using two JCBC
M6x55mm Bolts (D), four Washers (E), and two Wing
Nuts (F) as shown.
• Repeat to connect the remaining hanging bracket.
Do not fully tighten hardware until after the table is installed.
Ensure the tabletop will be at a suitable height before
installing this unit onto your railing.
Place the assembled unit over your balcony railing and
determine if the table height is to your liking. To raise
the table height, remove the unit from your railing and
evenly adjust the table to the upper mounting holes on
the hanging brackets.
Once the desired table height is achieved, adjust the
depth brackets to t the depth of your railing.
Fully tighten all hardware.
Gently lift the tabletop and rotate the support bar until it
aligns with the notch on the bottom of the table.
NOTE: the support bar rotates 180 degrees; always ensure it
is fully inserted into the notch under the table before use.
F: 4

Page 3 / 3
Care & Maintenance
SAFE USE: Ensure the tabletop is level before use, and the support bar is fully engaged with the notch
under the tabletop. Do not exceed the weight capacity of the tabletop. Do not sit, stand or climb on any part
of this unit.
EXPOSURE: Over time, sunlight and weather elements may degrade and change the color of natural wood.
Avoid leaving wooden furniture in the rain or high-humidity climates as wood swells and shrinks with moisture
and humidity changes. The stress caused by the wood swelling and shrinking can cause glued joints to fail.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals, abrasive materials, or a pressure washer to clean.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location when not in use.
Covering while in storage is recommended to help prevent dust build-up.
MAINTENANCE:If left untreated, the wood may weather. To maintain the appearance, apply a suitable
penetrating wood oil (not included) at least once per year or when the wood looks particularly dry.
Before applying a suitable wood oil, clean the unit and bring it into a dry, warm, indoor location. Allow the unit
to dry thoroughly before applying oil; drying may take several days. Only apply oil to wooden surfaces. Apply
oil as directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
89737 02/2022
WARNING
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

• Do not exceed the weight capacity of the table.
• Do not allow children to set up or use this item.
• Firmly secure all hardware and ensure the support bar is fully engaged before use.
• Inspect hardware often and tighten as necessary.
• Do not use this item in the proximity of open flame or flammable/combustible chemicals.
• Keep this unit a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Do not use harsh chemicals or abrasive materials to clean this unit.
• This product is for residential use only; institutional or commercial use will void this warranty.
SAFETY STATEMENTS & WARNINGS
