Sunnydaze Decor DSL-978 User manual

DSL-9305-H-S Page 1 / 3
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
A1 Leg 2
A2 Leg 2
BFootrest 4
CSeat 1
WARNING
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and
pets away during assembly.
01/2022
FIR WOOD SWIVEL BAR STOOL
DSL-978
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.

  
1M3.5x35mm Screw 16
2M3.5x60mm Screw 4
NOTE:
Wood is a natural product. Some checking
(splits in the wood) is a normal feature of wooden
products. Checking is part of what gives wood decor
an authentic appearance.
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully before assembly and assembling the item soon after
purchase. Check that all parts are accounted for, and familiarize yourself with the assembly before beginning.
Save this manual for future reference.
(not included)
Phillips Screwdriver

DSL-9305-H-S Page 2 / 3
Firmly insert two Support Bar (B) into the lower
holes of Legs (A1) and Legs (A2), as shown.
IMPORTANT:
Make sure the holes
of the legs are facing

01/2022
ASSEMBLY
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely fastened.
STEP 1
A1: 2
A2: 2
B: 2
STEP 2
B: 2
STEP 3
C: 1
STEP 4
Firmly insert the remaining two Footrests (B) into the
upper holes of Legs (A1) and Legs (A2), as shown.
Fasten the legs to the seat using four M3.5x60mm
Screws (2).
2: 4
Insert the tops of the four legs into the underside of
Seat (C).

DSL-9305-H-S Page 3 / 301/2022

• Do not exceed the weight capacity of the furniture.
• Do not stand on the stool.
• Inspect hardware often and tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
• Do not use a pressure washer to clean the furniture.
SAFETY STATEMENTS & WARNINGS
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

STEP 5
1: 16
Fasten the footrests to the legs using sixteen
M3.5x60mm Screws (1), as shown.
Flip the stool upright and check that it is sturdy. If
the stool feels loose the screws may need additional
tightening.
Care & Maintenance
SAFE USE: Only use on a at, level surface. Do not stand or climb on any part of this unit.
INSPECT: Periodically check hardware and tighten as necessary.
MOVING: Do not drag when moving the unit, as doing so will weaken assembly points and could cause
breakage.
CLEANING: Follow the woodgrain with a soft cloth to remove dust, dirt, and debris. Do not use chemicals or
abrasive materials as they will damage the wood.
WINTER CARE & STORAGE: Maintain the appearance and prevent damage by storing this item indoors
when not in use.
Wood expands when wet and contracts when it dries. Therefore, repeated and excessive exposure to moisture,
rain, and snow can damage the product. The resulting damage includes, but is not limited to, assembly points
becoming loose, wood cracking, mold and mildew growth, and hardware rust.
MAINTENANCE:If left untreated, the wood may weather. To maintain the appearance, apply a suitable
penetrating wood oil (not included). Reapply wood oil yearly or when the wood looks particularly dry.
Before applying wood oil, clean the unit and bring it into a dry, warm, indoor location. Allow the unit to dry
thoroughly before applying oil; drying may take several days. Only apply oil to wooden surfaces. Apply oil as
directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF PROTECTIVE COATINGS OR CHEMICAL TREATMENTS.