Sunnydaze Decor SHAKER BWD-856 User manual

Page 1 / 2BW21-03B
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
SHAKER STYLE DINING BENCH
BWD-856
Carefully read all assembly and information in this manual before using this product. Save this manual for future reference.

  
ASeat 1
BLeg 4
1JCBC M6x50mm Bolt 8
2Split Washer 8
3Flat Washer 8
4Tack Glide 4
5Hex Key 1
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully, and assembling the item soon after purchase. Check that
all parts are accounted for and familiarize yourself with the assembly before beginning.
CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
NOTE: Over time and with use, the bolts may become loose. Save the included tool for tightening loosened hardware.
12/2022
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

(not included)
Rubber Mallet
275
pounds
124.7 kg
Weight Capacity

SAFETY STATEMENTS & WARNINGS

Page 2 / 2
WARNING:


• For indoor use only.
• This product is for residential use only; institutional or commercial use will automatically void the product warranty.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Do not exceed the weight capacity of this item.
• Do not place liquids or hot items directly on the unit.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Avoid long-term exposure to sunlight.
• Avoid placing near heating or cooling vents as forced air is be very drying and could damage the wood.
• Use a padded barrier to protect the furniture surface when using writing utensils.
Care & Maintenance
Place Seat (A) upside-down on a soft, clean surface.
Align Leg (B) with the corner of the seat. Use two sets of Flat Washer (3), Split Washer (2), and JCBC
M6x50mm Bolt (1) to secure the leg as shown. Repeat until all legs have been securely fastened.
Use a rubber mallet to install one Tack Glide (4) into the bottom, center of each leg.
Tip: Always fully insert the hex key inside the designated notch of the bolt.
If the hex key is not entirely inside the notch, the hex key could slip out,
causing damage to the bolt head. In addition, repeated hex key slipping
will cause the notch to become rounded, making it di󰀩cult or impossible
to tighten the bolt.
BW21-03B
ASSEMBLY
Clean the furniture using a dry, soft cloth or clean
feather duster.
Do not clean with harsh cleansers or polish.
SOAP
Remove stains with a slightly damp cloth and mild
soap. Dry with a soft cloth to prevent water damage.
Do not put hot items or any liquids directly on the
furniture surface.
12/2022