SuperATV RTA-P-RZRXP User manual

Polaris RZRXP900 Rear Trailing Arms
INSTALLATION INSTRUCTIONS
740B Clifty Drive • Madison, Indiana 47250 • 812-574-7777
Liability Statement
SuperATV’s products are designed to best t users ATV/UTV under stock conditions.
Adding, modifying, or fabricating any factory, or aftermarket, parts will void any
warranty provided by SuperATV and is not recommended. SuperATV’s products
could interfere with other aftermarket accessories. If user has aftermarket products
on machine, contact SuperATV to verify that they will work together.
Although SuperATV has thousands of satised customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc will change the ride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product’s ability to
protect user from severe injury or death. SuperATV urges operators and occupants
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV products, user agrees that should damages
occur, SuperATV will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV, nor any 3rd party, will not be held
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV. The total liability of seller to
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV will warranty only parts provided by SuperATV. Any damage or problems
with OEM housings, bearings, seals, or other manufacturers products will not be
covered by SuperATV. SuperATV parts and products are not warrantied if item was
not installed properly, misused, or modied.
Read instructions and view illustrations before beginning.
Need help with your installation?
1-812-574-7777
[e-mail] www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
Thank You
For Choosing
(kit contents continue on following pages)
© 2014 SuperATV.com All Rights Reserved. IN-RTA-P-RZRXP 2/27/2014
Item Description Qty
ARear Trailing Arm, Right 1
BRear Trailing Arm, Left 1
CBrake Line Clips 4
DBearings 4
E Spacers 2
D
E
C
B
A(Right)
(Left)

(kit contents continued)
Qty (2) M10-1.50 x 100mm Lg. FHCS
Qty (8) M10-1.50 x 80mm Lg. FHCS
Qty (2) M10-1.50 x 65mm Lg. FHCS
M5 x 16mm Lg. PHMS
Qty (4)
M10-1.50 Nylock Nut
Qty (12) Installer may use, included, optional stock replacement
Nuts when reinstalling stock Bolts.
M10 Nylock Nut
(1.25 Thread)
Qty (4)
M12 Nylock Nut
(1.50 Thread)
Qty (4)
Remove
Remove
(Right)
Remove from Trailing Arms:
- Shocks
- Bearings
- Calipers
- Axles
- Radius Arms
- Brake Line Clamps
Drill out Rivets

3IN-RTA-P-RZRXP
IN-LK-P-85010-6
Stock Bolt
M12 Nylock Nut B
(Left)
Fig. 1
D
SuperATV recommends using Loc-Tite on stock Nuts when reinstalling.
(Optional: Use provided Nuts when reinstalling stock Bolts)
ASSEMBLY: Do not tighten hardware competely unless noted.
1. Install Bearings (D) into Rear Trailing Arm (B).
- Install to stock location with stock hardware. See Fig. 1.
2. Install Shock to Rear Trailing Arm (B) with stock hardware. See Fig. 2.
3. Install Wheel Bearing to Rear Trailing Arm (B) with M10-1.50 x 80mm Lg. FHCS and M10-1.50 Nylock
Nuts. See Fig. 3.
4. Install Axle with stock hardware.
- install Hub to Rear Trailing Arm (B) with stock hardware. See Fig. 4.
5. Install Radius Arms to Wheel Bearing with stock hardware. See Fig. 5.
6. Install Spacer (E) and Sway Bar Link to Sway Bar with M10-1.50 x 65mm Lg. FHCS and M10-1.50
Nylock Nut. See Fig. 6.
- Secure to Rear Trailing Arm (B) with M10-1.50 x 100mm Lg. FHCS with M10-1.50 Nylock Nut. See
Fig. 6.
7. Secure Brake Line to Rear Trailing Arm (B) with Brake Line Clips (C) and M5-.80 x 16mm Lg. PHMS.
Ensure no binding can occur when machine is in use. See Fig. 7.
8. Repeat steps for opposite side and tighten hardware completely.

4IN-RTA-P-RZRXP
Wheel Bearing
(Left)
Fig. 3
B
M10 x 80mm Lg. FHCS
Qty. (4) each
M10 Nylock Nut
(1.50 Thread)
Fig. 2
(Left)
B
Stock Bolt
M12 Nylock Nut

5IN-RTA-P-RZRXP
Fig. 5
(Left)
B
Wheel
Bearing M10 Nylock Nut
(1.25 Thread)
Stock Bolt
Hub
Stock hardware
Axle
Fig. 4
(Left)
B

6IN-RTA-P-RZRXP
Fig. 7
M5 x 16mm Lg.
C
B
(Left)
Fig. 6
(Left)
B
M10 x 65mm Lg. FHCS
M10 x 100mm Lg. FHCS
M10 Nylock Nut
(1.50 Thread)
E