SuperATV WM-CA-COM User manual

© 2011 SuperATV.com®. All Rights Reserved. Rev IN-WM-CA-COM 3/4/2014
INSTALLATION INSTRUCTIONS
Read instructions and view illustrations before beginning.
Need help with your installation?
1-812-574-7777
[e-mail] www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
Winch Mount
Winch not included.
M8-1.25 x 25mm Lg. FHCS
6x
M8-1.25 Nylock Nut
6x
Some hardware may remain after installation
2753 Michigan Road • Madison, Indiana 47250 • 812-574-7777
Thank You
For Choosing
Winch Mount: for Can-Am Commander
Liability Statement
SuperATV’s® products are designed to best t user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts will
void any warranty provided by SuperATV®and is not recommended. SuperATV’s®
products could interfere with other aftermarket accessories. If user has aftermarket
products on machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satised customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product’s ability to
protect user from severe injury or death. SuperATV®urges operators and occupants
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV®products, user agrees that should damages
occur, SuperATV®will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV®. The total liability of seller to
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV®will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products will
not be covered by SuperATV®. SuperATV®parts and products are not warrantied if
item was not installed properly, misused, or modied.

IN-WM-CA-COM 2
(Passenger Side)
Winch Mount
M8 Nut
M8 x 25mm
(4) places
(Driver Side)
Winch Mount
Do not tighten hardware completely unless noted. Keep all components removed from machine.
1. Remove Front Bumper and Lower Facia.
2. Install Winch Mount to Frame with hardware shown.
3. Secure lower portion of Winch Mount with hardware shown.
4. Install Fairlead to Winch Mount; hardware and Fairlead included with Winch.
5. Reinstall Front Bumper and Lower Facia and tighten all hardware completely.