3
ENG
User’s Manual PS-40BL
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
• Connect speaker system to a USB port of PC or USB charger using mini USB to USB
cable (included). During battery charging the indicator d is red.
• The battery is used in the speaker system as an integral part of the device, therefore do not
try to extract or replace it, because this can result in the warranty cancellation or the device
damage.
Control buttons
When connected to a telephone:
• in order to receive an incoming call press the button b ( ); press the button b ( )
once again to finish the call;
• in order to drop an incoming call press and hold button b ( ) (for ~2 sec.)*;
• in order to press and hold the button the call function of the last number dialed* is
switched on;
• long displacement of the joystick b (+/-) – change of the volume level;
• short displacement of the joystick b ( , ) – switching between musical tracks of the
media player of a connected device**, switching of musical files from micro SD memory
cards, switching of radio stations in FM tuner mode;
• short press of the joystick b ( ) Playback/Pause of the media player of a connected
device**.
• short press of the joystick b ( ) – the tuner will enter the autoscan mode (FM tuner mode).
• long press the of the joystick b ( ) – switching modes: player / radio / AUX.
* Depending on telephone / smartphone configuration.
** Depending on a program of the media player.
Bluetooth technology
• Wireless data transfer via the Bluetooth protocol enables to connect speaker system to
compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as
walls or other electronic devices can interfere with the signal transfer.
Connection of speaker system with the signal source (phone, laptop, smart phone,
etc.)
• Turn on the speaker system mode Bluetooth – switch c into BT. The LED indicator d at
the same time will flash by short flashes with blue light.
• It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). “SVEN PS-40BL” massage will be displayed on the
screen which is to be connected to*.