Swann WT82 User manual

1
EN
Leak Alert Sensor
Sensor de alerta de filtración
Capteur d’alerte de fuite
Sensore di avviso perdita
Leckwarnsensor
EN Quick Start Guide ES Guía de inicio rápido FR Guide de démarrage rapide
IT Guida rapida DE Schnellstartanleitung

2
EN
OVERVIEW
Cable length 1.9m (6ft 3”)
Water-sensing metal contacts
Status light
Sensor
Cover screw
Remove to access battery compartment
and QR code (located under cover)

3
EN
BATTERY INSTALLATION
1Unscrew the sensor cover with the supplied screwdriver and lift it off.
2Insert the supplied two AAA batteries into the battery compartment according to the polarity
markings (+ and -) shown. Pairing mode will automatically activate on the sensor for 3 minutes
when batteries are inserted. The sensor status light will blink blue slowly during pairing mode.
If you have downloaded the Swann Security app on your mobile device (see page 4), you can
proceed to the pairing process (see page 5).
Note: Pairing mode on the sensor can be activated at any time by re-inserting the batteries.
3 Afteryouhavepairedthesensor,replacethecoverandscrewitrmlyinplace.
4Should you need to replace the batteries in the future, there is no need to re-pair the sensor.
Simply wait for pairing mode to timeout (3 minutes), after which the sensor will automatically
reconnecttothepreviouslyconguredWi-Finetwork.

4
EN
DOWNLOAD THE SWANN SECURITY APP
1Download the latest version of the Swann Security app from the Apple App Store® or Google
Play™ Store on your iOS or Android device. Simply search for "Swann Security".
2Open the app and create your Swann Security account by tapping “Not yet registered? Sign
Up”atthebottomofthescreen.Then,activateyourSwannSecurityaccountbyconrmingthe
vericationemailthatissenttotheregisteredemailaddress.

5
EN
Open the Swann Security app and tap the Pair Device button on the screen. If you have already paired
a device, tap the menu icon in the top left and select “Pair Device”.The app will now guide you
through the pairing process and set up the sensor.
Before you begin, have the sensor with you and be close to your router. Please note that the sensor
canconnecttoa2.4GHzWi-Finetworkonly.
SET UP THE SENSOR