Swegon WISE WS a User manual

WISE WS a
Instructions for Use 28/10/2021
The document was originally written in Swedish
Protective equipment
Always use appropriate personal protective
equipment for the work in question, in the
form of gloves, respirators and protective
glasses during handling, installation, cleaning
and service/maintenance.
Electrical safety
Permitted voltage, see “Electrical data”.
It’s not permissible to insert foreign objects
into the product’s contactor connections or the
electronics’s ventilation openings; risk for short-
circuiting.
Cable sizing must be carried out for cabling between the
product and the power supply source.
Disconnect the power supply when working on products
that are not required to run in production.
Always follow the local/national rules for who shall be
permitted to carry out this type of electrical installation.
Handling
• The product must be handled with care.
Installation
• Assemble the product according to applicable industry
regulations.
• Install the product for easy access during service/
maintenance.
• Check to make sure that the product doesn’t have any
visible defects.
• Check that the product is properly secured after it has
been installed.
• Check that all cables are properly secured in place after
installation.
Symbol explanation
Symbols on the machine
This product complies
with applicable EU directives
Symbols in this user manual
Warning/Caution!
Application area
The product is a weather station with communication via
Modbus intended to control solar shading within Swegon’s
demand-controlled indoor climate system WISE.
The product may not be used for anything other than its
intended use.
General
Read through the entire instructions for use
before you install/use the product and save the
instructions for future reference. It’s not permis-
sible to make changes or modify this product
other than those specified in this document.
The packaging contains the following items
1 x WISE WS
1 x Connection 10 m
1 x Wall mounting bracket
1 x Instructions for Use

WISE WS
2Swegon reserves the right to alter specications. 28/10/2021
Figure4. Measurements, WISE WS.
Installation, dimensions
& weight
The guide pieces must be removed when installing with
the supplied wall mounting bracket, see figure1.
It must be mounted in the correct north direction (geo-
graphic north) for accurate determination of wind and sun
direction.
The hex screw serves as the north marking, see figure2.
Figure1. Installation with wall mounting bracket.
Weight, casing (kg)
0.22
Ø25
12 67,5
Ø130
Ø45
Figure2. Determination of the wind and sun direction.
Guide pieces
Hex screw
Figure3. WISE WS with wall mounting bracket.
E
N
W
S

WISE WS
3
28/10/2021 Swegon reserves the right to alter specications.
Figure5. Connection WISE WS.
RFID
12345689ABCDEF
WISE WS WISE DIR
24V AC Modbus
++GND-
24V AC
+-
-
Modbus
+GND -
WHITE
BROWN
GREEN
GRAY
YELLOW
5-way connection cable 1 2
WHITE
BROWN
GREEN
GREY
YELLOW
5-way connection cable
PIN Core colour Function
2White DATA_GND
3Brown DATA +
4Green DATA -
6Yellow 24V AC +
7Grey 24V AC -
Connections Use
Use SuperWISE to activate communication via Modbus
RTU on the WISE DIR to which the weather station is
connected.
Trouble shooting
• Make sure that the product is energized.
• Check the product’s Modbus connection.
• Check that the product is connected correctly to the right
WISE DIR.
Cleaning
Ideally, the product should be cleaned in connection with
the cleaning of the rest of the ventilation system.
External cleaning
• If necessary use water and a soft cloth.
• Never use a detergent or cleaning solvent.
Service/maintenance
• The product doesn’t require any maintenance, except
for any cleaning when necessary.
• Check the general condition of the product in con-
nection with a service. Pay particular attention to the
suspension, cables and that they sit firmly in place.
• It’s not permissible to open or repair electrical components.
• If you suspect that the product or a component is
defective, please contact Swegon.
• A defective product or component must be replaced by
an original spare part from Swegon.
Materials and surface treatment
• Polycarbonate casing.
• Stainless steel wall mounting bracket.
Disposal
Waste must be handled according to local regulations.
Product warranty
The product warranty or service agreement will not be
valid/will not be extended if: (1) the product is repaired,
modified or changed, unless such repair, modification
or change has been approved by Swegon AB; or (2) the
serial number on the product has been made illegible or is
missing.

WISE WS
4Swegon reserves the right to alter specications. 28/10/2021
Technical data
IP class: IP65, only for correct installation
CE marking: See Thies Clima
Adolf Thies GmbH & Co. KG
WSC11 (4.9056.10.000)
Function Range of measurement
Wind speed 0 … 40m/s
Wind direction 1 … 360°
Light intensity 0 … 150 kLux (N, S, E, W)
Sun angle 1 … 360°
Sun height 1 … 360°
Twilight 0 … 999 Lux
Precipitation 0/1 (no/yes)
Temperature -30 … +60°C
Relative humidity
Relative 0 … 100%
Absolute 0 … 400g/m3
Dew-point -30 … +60°C
Air pressure 300 … 1100hPa
Electrical data
Power supply: 24V AC
Communication: Modbus RTU via WISE DIR
References
www.swegon.com
WISE WS product data sheet
WISE System Guide
SuperWISE II / SuperWISEII SC User Manual