Swiss Madison Annecy Bathroom Vanity User manual

INSTALLATION
INSTRUCTIONS
Annecy Bathroom Vanity
www.swissmadison.com | 19 Stults Rd, Dayton, NJ 08810 | 1-434-623-4766 | [email protected]
Share your pictures for a feature!
using #SwissMadison
Swiss Madison
®

—1 —
Prior to Installation:
If you have any questions or concerns please contact us:
1-434-623-4766
[email protected]om
General Recommendations: Read installation and maintenance instructions thoroughly before installing the vanity.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
Inspect vanity to ensure no damages have occurred while in shipping.
Observe all plumbing and building codes in accordance with your state and local requirements.
Additional oor and wall preparations may be necessary to avoid damage to the product.
All dimensions are nominal! Be sure to measure your vanity prior to installation.

—2 —
Thank you for purchasing a Swiss Madison Vanity.
We appreciate your business and know you will enjoy your sink for many years to come.
If you have any questions or require assistance we would be happy to help,
please contact us at 1-434-6234766 or [email protected].
Thank you for your purchase
www.swissmadison.com
To learn more about our products, please visit:
Sincerely,
The Swiss Madison Team

BATHROOM VANITY MODELS
—3 —
NOTE: All dimensions are nominal.
SM-BV212, SM-BV222, SM-BV232
24.2” x 19.8” x 34.6”
19.8”
24.2”
22.8” 11.8”
SM-BV213, SM-BV223, SM-BV233
36” x 19.8” x 34.6”
19.8”
36”
22.8” 11.8”
SM-BV216, SM-BV226, SM-BV236
59” x 19.8” x 34.6”
19.8”
36”
22.8” 11.8”
SM-BV214, SM-BV224, SM-BV234
47.6” x 19.8” x 34.6”
19.8”
47.6”
22.8” 11.8”

BATHROOM VANITY MODELS
—4 —
*Matching drains are not included, please contact us if you wish to purchase one.
NOTE: Specialized tools may be necessary to install Swiss Madison Vanity.
SUGGESTED TOOLS AND MATERIALS
PARTS LIST
Swiss Madison Sink Vanity Components Mounting Hardware
Gloves
Safety Glasses
Screw Drivers Pencil
Drop Cloth Silicone Level Tape Measure
Drill
Drain (not included)*
SM-PD23B
SM-PD23Z
H
L
W

The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Vanity.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
1. Read the complete instruction manual before beginning installation.
2. This vanity should be installed by an experienced plumber.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4. Drain pipe and drain trap are not supplied. Connect to an existing drain pipe.
5. Always use drop cloth to protect vanity from damage during installation.
6. Two people are recommended to install and move this product.
Draw Removal (if applicable)
Remove Vanity and Sink from Box
Carefully remove vanity and sink from box.
DO NOT use a box cutter to open box to avoid damaging the nish.
—5 —
BATHROOM VANITY INSTALLATION INSTRUCTIONS
NOTE: Drawings may not exactly dene contour of china.
1. Remove
2. Install

—6 —
Freestanding Vanity Installation
1.
2.
STU D S
Leave a 0.39” gap to the edge of the vanity.
*
0.39"
1
3
2
*
4 PCS

 
@
2340 " $%%!&'!(
40 '23%0 
$&(
-$&%)&&$&
"%,$.&$"&
%)%3"8&
&&&"$&%
'%.&$&")$%
4'&%&&
"9,%'&%'&%$,&%&
&&%&&&.@&
&&%&%
%&&8%
'&%&)A&&%&&
)&&)%
, -./0'01
%-./0 01



 
@
2340 " $%%!&'!(
40 '23%0 
$&(
-$&%)&&$&
"%,$.&$"&
%)%3"8&
&&&"$&%
'%.&$&")$%
4'&%&&
"9,%'&%'&%$,&%&
&&%&&&.@&
&&%&%
%&&8%
'&%&)A&&%&&
)&&)%
, -./0'01
%-./0 01



STU D S
—7 —
Wall Hung Vanity Installation
1.
2.
Select hardware that is best suited for your wall type.
Important: Use “pan head” or “round head” screws with seat washers.
Seat screws tightly against back rail or panel without driving into back rail or panel material.
STU D S
STUDS: Secure to wall with #10” x 3”
screws at stud location. Locate at least
2 wall studs.
• Use at least 4 wall anchors when
installing a 24” and 30” cabinet.
• Use at least 6 wall anchors when
installing a 36” and 48” cabinet.
CONCRETE: Drill 1/4” holes, insert
#10 wall anchors and secure to wall
with #10” x 3” screws.
DRYWALL: Drill holes and secure to wall
with toggle bolts.
Note:Use toggle bolts only when
cabinet cannot be attached to a wall stud.
6 PCS

—8 —
Wait 24 hours before use.
1
 
@
2340 " $%%!&'!(
40 '23%0 
$&(
-$&%)&&$&
"%,$.&$"&
%)%3"8&
&&&"$&%
'%.&$&")$%
4'&%&&
"9,%'&%'&%$,&%&
&&%&&&.@&
&&%&%
%&&8%
'&%&)A&&%&&
)&&)%
, -./0'01
%-./0 01



 
@
2340 " $%%!&'!(
40 '23%0 
$&(
-$&%)&&$&
"%,$.&$"&
%)%3"8&
&&&"$&%
'%.&$&")$%
4'&%&&
"9,%'&%'&%$,&%&
&&%&&&.@&
&&%&%
%&&8%
'&%&)A&&%&&
)&&)%
, -./0'01
%-./0 01



If adjustment or realignment is needed, follow the instructions provided in the following chart.
1. Install the faucet per manufacturer’s installation instructions.
2. Hand tighten the pop-up drain with a wrench. Be careful not to over-tightening the pop-up
drain. Over tightening may cause cracks on the marble top.
3. Set the vanity top on top of the vanity base, checking the location of the p-trap and drain.
4. Remove vanity top from vanity base. Apply a thin bead of silicone compound around the
vanity base and set the vanity top carefully in place.
5. Remove any excess silicone compound with a wet cloth.
Vanity Top Installation
Hinge/Door Adjustment and Realignment (if applicable)
3
2

Swiss Madison® products are made with quality materials and excellent craftsmanship to provide the
customers a long lasting product. In the case of any defects in materials or craftsmanship under regular
use were inspected in the rst year of purchase, Swiss Madison® will provide replacement parts at no
charge, or at its option, replace any product or part of the product that is deemed defective, under
normal installation, use, service and maintenance. This warranty applies only to the original purchaser.
Proof of purchase will be required in the case of a claim.
Swiss Madison® recommends the installations to be made by a licensed, professional plumber.
Swiss Madison® will not be held responsible for any damage or product failure due to improper
installation, misuse, or failure to use a licensed professional. Swiss Madison® is not responsible for any
removal or installation cost.
This One Year Limited Warranty will be voided if:
•The installation recommendations were not followed.
•The product has been moved from it’s initial place of installation.
•The product has been modied.
•The product has been subjected to improper maintenance, abuse, misuse, excessive use of
chemicals, accident or other damages.
Swiss Madison® makes no implication that products comply with any or all local building or plumbing
codes. It is the consumer’s responsibility to determine local code compliance. This warranty extends to
the original purchaser and rst consumer.
Swiss Madison® is not liable for any incidental, consequential or special damages associated with the
return, replacement, installation or use of your product. This includes freight costs, labor, travel time, lost
prot, home damages and other contingent liabilities and costs (including, without limitation, costs
associated with experts, investigations, analyses, attorneys and other professionals and services).
The Swiss Madison® warranty is a comprehensive and explicit limit of liability, and all items outside of it
are not addressable by or the responsibility of Swiss Madison®. Certain states have variances regarding
implied warranties and in those situations we remain fully compliant.
In the case of any questions or a claim contact us directly at 1-434-MADISON (623-4766).
WARNING: Content may contain sharp and other possibly harmful pieces and may cause hazard to
children and adults, Swiss Madison® is not responsible in any way for personal damage.
ONE YEAR LIMITED WARRANTY
1-434-MADISON
(623-4766)
19 Stults Rd., Dayton, NJ 08810
www.swissmadison.com
Swiss Madison
®