Swiss Madison SM-BV901WG User manual

Vanity
Base

1:Left side panel
2:Right side panel
3:Near bottom panel
4:Bottom panel
5:Top drawer panel
6:Drawer panel
6-1:Drawer left panel
6-2:Drawer right panel
6-3:Drawer bottom panel
6-4:Drawer left back panel
6-5:Drawer right back panel
A.Cam bolt
B.Cam lock
C.Cam patch
65mm
Screw 4 cam bolts(A)into the left side panel(1) .Repeat for the right side panel(2)
Screw 1 cam bolts(A)into the drawer left back panel(6-4). Repeat for the Drawer right back panel(6-5)
Screw 6 cam bolts(A)into the drawer panel(6)
1.Install drawer panel

Connect the drawer left /right back panel (6-4/6-5) to the drawer bottom panel (6-3) Use 2 cam locks
(B) to secure in the place.
Attach the drawer back panel (6-4/6-5)and drawer bottom panel (6-3)to the drawer left side panel(6-1)
and secure using 4 cam locks(B).
Repeat for the drawer right side panel(6-2).
Connect the drawer front panel (6)to the left/right drawer side panel Use 6 cam locks (B) to secure in
the place.
2.Assemble drawer panel
3.Install aluminum frame

8
7
4
Connect the aluminum frame (1) to the 25*25*540 aluminum bar (2) use 6 M4*10 screw (4).
Connect the aluminum frame (1) to the 25*25*540 aluminum bar (3) use 8 M4*10 screw (4).Note that
the aluminum bar with hole (3) is installed at the bottom.
Attach the drawer (7) to the aluminum frame and secure using 8 M4*20 screw (5).
Attach the slide rail to the left/right side panel and secure using 8 M4*14 screw Please note that there
are two screws that need to be punched at the positions marked on both ends of the slide rail.
Connect the slide rail to the bottom of the drawer side panel use 2 M4*20 screw to secure in the place
when the drawer is installed