Swiss Madison Concorde SM-BD229 User manual

INSTALLATION
INSTRUCTIONS
Swiss Madison
              
Concorde Wall Hung Bidet
www.swissmadison.com | 1-434-623-4766 | [email protected]
Share your pictures for a feature!
using #SwissMadison

Prior to Installation:
If you have any questions or concerns please contact us:
Inspect bidet to ensure no damages have occurred while in shipping.
Observe all plumbing and building codes in accordance with your state and local requirements.
Have your in-wall carrier system installed.
1-434-623-4766
[email protected]om
General Recommendations: Read installation and maintenance instructions thoroughly before installing the bidet.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
—1 —

—2 —
Thank you for purchasing a Swiss Madison Wall Hung Bidet.
We appreciate your business and know you will enjoy your toilet for many years to come.
If you have any questions or require assistance we would be happy to help,
please contact us at 1-434-6234766 or [email protected].
Thank you for your purchase
www.swissmadison.com
To learn more about our products, please visit:
Sincerely,
The Swiss Madison Team

WALL HUNG BIDET ROUGHING-IN DIMENSIONS
—3 —
NOTE: Specialized tools may be necessary to install Swiss Madison Wall Hung Bidet, plumbing not included.
NOTE: The In-Wall Carrier System is REQUIRED for installation of the wall hung bidet,
it can be purchased separately from Swiss Madison.
SUGGESTED TOOLS AND MATERIALS
Swiss Wall Hung Bidet Bolts
In-wall Carrier System (SM-WC124) Faucet
Side Cover Caps
Safety Glasses Wrench Level
Screwdriver
NOTE: Distance from wall to closest ange centerline must be listed as below.
Putty Knife Tape Measure
Hacksaw
Flexible Supply Tube
PARTS LIST
REQUIRED COMPONENTS (NOT INCLUDED)
12.99”
22.44”
13.78”
22.44”
Sealant

ONE-PIECE TOILET INSTALLATION INSTRUCTIONS
1. Read the complete instruction manual before beginning installation.
2. Conrm that your model will t in intended location and plumbing xtures are located where
legally required before beginning installation.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4. Two people are recommended to install and move this product.
5. Product is FRAGILE! To avoid breakage and possible injury handle with care.
—4 —
NOTE: Drawings may not exactly dene contour of china.
The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Wall Hung Bidet.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
1. Prepare for Installation
Turn-o water supply and if necessary remove old bidet.
Be sure your in-wall carrier system has been installed.
Install or relocate the supply tubing and waste pipe.
2. Install Plumbing
Install plumbing and xtures onto bidet.
1
2

—5 —
NOTE: Drawings may not exactly dene contour of china.
3. Mount Bidet
Connect plumbing and mount bidet to the wall.
3. Secure Bidet
Cover opening with included caps.
NOTE: Do NOT over-tighten as it might lead to cracks!
Attach bowl via washer and blots.
4. Check for Leaks
Turn on water supply and test bidet for leaks.
5. Apply Sealant
Apply a bead of sealant between the bidet and the wall.

Swiss Madison® products are made with quality materials and excellent craftsmanship to provide the
customers a long lasting product. In the case of any defects in materials or craftsmanship under regular
use were inspected in the rst year of purchase, Swiss Madison® will provide replacement parts at no
charge, or at its option, replace any product or part of the product that is deemed defective, under
normal installation, use, service and maintenance. This warranty applies only to the original purchaser.
Proof of purchase will be required in the case of a claim.
Swiss Madison® recommends the installations to be made by a licensed, professional plumber.
Swiss Madison® will not be held responsible for any damage or product failure due to improper
installation, misuse, or failure to use a licensed professional. Swiss Madison® is not responsible for any
removal or installation cost.
This One Year Limited Warranty will be voided if:
•The installation recommendations were not followed.
•The product has been moved from it’s initial place of installation.
•The product has been modied.
•The product has been subjected to improper maintenance, abuse, misuse, excessive use of
chemicals, accident or other damages.
Swiss Madison® makes no implication that products comply with any or all local building or plumbing
codes. It is the consumer’s responsibility to determine local code compliance. This warranty extends to
the original purchaser and rst consumer.
Swiss Madison® is not liable for any incidental, consequential or special damages associated with the
return, replacement, installation or use of your product. This includes freight costs, labor, travel time, lost
prot, home damages and other contingent liabilities and costs (including, without limitation, costs
associated with experts, investigations, analyses, attorneys and other professionals and services).
The Swiss Madison® warranty is a comprehensive and explicit limit of liability, and all items outside of it
are not addressable by or the responsibility of Swiss Madison®. Certain states have variances regarding
implied warranties and in those situations we remain fully compliant.
In the case of any questions or a claim contact us directly at 1-434-MADISON (623-4766).
WARNING: Content may contain sharp and other possibly harmful pieces and may cause hazard to
children and adults, Swiss Madison® is not responsible in any way for personal damage.
ONE YEAR LIMITED WARRANTY
1-434-MADISON
(623-4766)
19 Stults Rd., Dayton, NJ 08810
www.swissmadison.com
S wiss M adison
              