Swiss Madison Nadar SM-BV371WN User manual

· Screw 7 cam bolts(A) and 2 Adjustable feet (H) into the left side panel(1).Repeat for the right side panel(2)
· Insert 2 cam bolts (A) and 4 wooden dowels (C) into the bottom panel (3).
· Insert 2 wooden dowels (C) into the front top bar (6)

·Connect the rear bottom bar (5)to the bottom panel(3) Use 2 cam locks (B) to secure in the place.
· Attach the bottom panel to the left side panel(1) and secure using 4 cam locks(B)
· Attach the rear top bar(4) to the left side panel(1) and secure using 2 cam locks(B)
· Attach the front top bar(6) to the left side panel(1) and secure using 1 cam locks(B)
· Repeat the process to the right side panel(2) using an additional 7 cam locks(B)

· Screw 4 cam bolts (A) into the drawer back panel（11）
· Insert drawer bottom panel(13)
· Screw 4 cam bolts (A) into the drawer front panel(12)
· Use 8 cam locks (B) to connect and secure all panels in place as shown.
· Screw 4 cam bolts (A) each into the drawer drawer back left panel (16)&drawer back right panel (17)
· Screw 4 cam bolts (A) into the drawer middle front panel (20)
· Insert drawer bottom panel（22）
· Screw 4 cam bolts (A) into the drawer front panel(21)
· Use 16 cam locks (B) to connect and secure all panels in place as shown.

· Insert the drawer box and hooks the slides（G)
· Tighten the 2 screws (E) each on the bottom of the drawer box to secure the slides (G).
· Repeat entire process for the top drawers(8).
· Attach the drawer front panel (12) to the drawer
surface (7) with 4 screws (F) as shown.
·Repeat the process for the top drawer by
connecting the top drawer front panel (21) to
the top drawer surface (8) using 4 screws (F).
.Install 2 undermount slides (G) to the side
panel(1)&(2) using 2 screws (E) each per
slide as show.

· Attach 2 screws (D) to the rear top bar（4）.
· Mark desired mounting location on wall and
ensure placement is level.