Symmons Duro SLW3612PP Manual

Model Numbers Feature Highlights
☐SLW3612PP Two Handle Widespread Lavatory
Faucet with a Push Pop Drain Assembly
☐SLW3622PP Two Handle Widespread Lavatory
Faucet with a Push Pop Drain Assembly
• 8" to 16" mount configuration
• Quarter turn ceramic cartridges
• 6-5/8" height (SLW3612PP)
• 4" height (SLW3622PP)
• Push Pop Drain Assembly
• Standard 1.0 gpm (3.8 L/min) flow rate
• Faucet shall be metal construction, plated in standard
polished chrome finish
Compliance
ASME A112.18.1/CSA B125.1
NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372
WaterSense 1.0 gpm (3.8 L/min) Certied by
IAPMO R&T
c
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
Duro®
SLW3612PP, SLW3622PP
Two Handle Widespread Lavatory Faucet
Operation & Maintenance Manual
WARNING: This product can expose you to
chemicals including lead, which is known to the
state of California to cause cancer, birth defects, or
other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.

Dimensions
Measurements
AMin. 8", 203 mm
Max. 16", 406 mm
B1/2-14 NPSM
C
(3x) Hole size
Min. Ø 1-1/4", 32 mm
Max. Ø 1-3/8", 35 mm
D
Deck Thickness Ref.
Min. 7/8", 22 mm
Max. 2-3/8", 60 mm
Note: Dimensions subject to change without notice.
Duro®
SLW3612PP, SLW3622PP
AA
DD
CC
BB
-H2
-H3

3
Parts Breakdown
Tools Required
Adjustable Wrench
Allen wrench (2 mm)
Plumber Putty
Phillips Head
Screwdriver
Soft Jaw Pliers
PLUMBER
PUTTY
Replacement Parts
Handle assembly
handle (2)
screw (2)
escutcheon (2)
Aerator & retainer
ow rates
2.2 gpm (8.3L /min)
1.5 gpm (5.7L /min)
1.0 gpm (3.8L /min)
LN-15*
FLR-110-1.5*
FLR-110-1.0*
KN-114 (hot)
OFF = CW
KN-113 (cold)
OFF = CCW
Valve cartridge
RL324
Mounting
hardware kit
RL-148 retainer (2)
gasket (2)
ex hose (2)
washer
aerator
retainer
Push Pop Drain Assembly
RL-149
Part Number Item
*
Replace cartridge
using a 17 mm
deep socket
wrench.
spout
aerator & retainer
* Note: When ordering replacement parts for faucets
with an optional decorative nish, append appropri-
ate three letter nish sufx code to part numbers
marked with an asterisk (*).
handle
cartridge sleeve
handle escutcheon
centerbody
ex hose assembly
1/2 "valve body
ange nut
Push Pop Drain Assembly
gasket
valve cartridge
gasket
washer and plate
spout retaining nut
2 mm wrench
(included)
moutning sleeve
spindle extender
phillips head screw
ex hose adapter

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2023 Symmons Industries, Inc. ■symmons.com ■[email protected]om ■ZV-3620 REV B ■ 022323
Quick Install Guide
1
2
4
5
3
6
1
2
3
Plumbers Putty L
Q
X
N
Y
O
M
Installation Notes:
1) Apply plumber tape to
threaded connections as
shown in illustration.
2) DO NOT use plumber
putty or plumber tape on
ttings with face seal
washers or o-ring seals.
3) DO NOT OVERTIGHTEN
ttings with face seal
washers or o-ring seals.
Step 2 Note:
Handle escutcheon
must be threaded to
mounting sleeve before
installing lever handle.
Step 5 Note:
Push Pop Install: Insert drain body (L)
into drain opening. From below, Tighten
locking nut (O) with gasket (M) and
washer (N) to ange. Tighten tail nut (Y)
with washer (X) to secure tail pipe (Q).
Do Not overtighten.