Symmons SRT-4670 Quick guide

Quick Install Guide Lucetta Roman Tub Faucet, SRT-4670
Step 8
Flush water supply lines
Step 7
Attach water spout
Step 5
Attach handles
Step 4
Attach valve assembly
Step 6
Connect water supply lines
and check for leaks
Step 2
Solder valve assembly together
Step 1
Cut copper tubing to length
nished deck
Step 3
Mount valve assembly
5/64"
1/8"
1 2 3 4
SRT-4670............. Chrome finish
SRT-4670-STN .... Satin Nickel finish
Roman Tub Faucet SRT-4670
Installation and Service Instructions
Lucetta®
Model Numbers Tools & Materials  Need Help?
Contact Symmons customer service at
[phone], [phone]
Email: [email protected]
Monday - Friday 8:00 am - 7:30 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service

Step 1 Cut copper tubing to length
Step 2 Solder valve assembly together
Length = (d) minus 2-1/4 inches (57 mm) divided by 2.
Example:
-
If center to center distance (d) is 14 inches.
-
14 inches minus 2-1/4 inches = 11-3/4 inches.
-
11-3/4 inches divided by 2 = 5-7/8 inches.
-
Cut 2 copper tubes into 5-7/8 inch lengths.
* Maximum distance (d) with supplied
copper tubing is 18-1/4 inches (463 mm)
center to center distance (d)*
1/2" (12.7 mm) copper tubing
Ensure valves are
parallel aligned
when soldering.
Step 3 Mount valve assembly to deck
Step 4 Attach valve assembly to deck
red
(hot)
blue (cold)
nished deck
front view
Thread down until
stop is reached
nished deck
front view
D1 D2
D1 = D2
Caution: If replacing an older faucet ensure water supply is
turned OFF before removing and then turn faucet handles ON
to relieve water pressure.
Installation Instructions
Page 2

Step 5 Attach faucet handles
Step 6 Solder supply lines to valve inlets
Step 7 Attach faucet spout to deck
OFF = CCW
OFF = CW 5/64"
cold
hot
1/8"
Step 1 Remove faucet handle and collar
Step 2 Remove and replace cartridge
Step 3 Attach collar and faucet handle
Valve cartridge replacement
5/64"
OFF = CCW
OFF = CW 5/64"
Care of faucet finish
Clean nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve nish area.
Step 8 Flush water supply lines
Page 3

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184
[phone], [phone] ■Fax [phone]
Website: www.symmons.com ■Email: [email protected]
©2008, 2009 Symmons Industries, Inc. Printed in U.S.A. ■ZV-576 ■121709
KN-113E
identified
by groove
KN-114E (hot)
OFF = CW
KN-113E (cold)
OFF = CCW valve cartridge
Screw requires
5/64” Allen wrench
RT-CYL-TP-KIT*
2 handles
included
handle (2)
screw (2)
collar (2)
fastener (2)
gasket (2)
Replacement Parts
Part Number Item (Qty)
aerator
RT-106*
Parts Assembly Lucetta Roman Tub Faucet, SRT-4670
handle
screw
collar
fastener
gasket
spout
aerator
valve cartridge
reference table
ange nut
hot/cold identier
valvebody
copper tubing
tee
Ordering replacement parts:
Call Symmons customer service at [phone],
[phone] M-F 8:00 am - 7:30 pm EST or
check our website at www.symmons.com for a
list of Symmons distributors.
Note: For decorative nish faucets append three
letter sufx code to parts marked with an asterisk (*).
*
screw
base
plug
centerbody
retainer
ange nut
Reference
table
4"
101 mm
2-3/8"
(60 mm)
2-1/16" (52 mm) dia.
Connect using
1/2" copper tubing
1" dia. (25 mm)
Hole size
1-1/16" (27 mm) min.
1-1/2" (38 mm) max.
Finished deck thickness
1-3/8" (35 mm) max.
(1)3-3/8" (86 mm) max.
for TT style faucet
Dimensions Lucetta Roman Tub Faucet, SRT-4670
8" (203 mm) min.
18-1/4" (464 mm) max
with Symmons supplied copper tubing
3-15/16" (101mm)
5-15/16" (151mm)
*TT style faucet
7-11/16" (196 mm)
9-3/8" (238 mm)
8-7/8"
225 mm
6-3/16"
158 mm 2-5/8"
67 mm dia.
Note
(1) Use TT style faucet if deck thickness is 1-3/8" to 3-3/8" (35 mm - 86 mm).
Contact Symmons customer service to special order TT style faucet, model number SRT-4670-TT-BDY.
(2) Dimensions subject to change without notice.