Synco MIC-D2 User manual

Mic-D2
User Manual • Uživatelský manuál • Užívateľský manuál •
Használati utasítás • Benutzerhandbuch

2
Content • Obsah • Tartalom • Inhalt
English
3 –13
Čeština
14 –24
Slovenčina
25 –35
Magyar
36 –46
Deutsch
47 –57
Importer • Dovozce • Dovozca • Importőr • Importeur
Alza.cz a.s.
Jankovcova 1522/53
Prague 7
www.alza.cz

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use
and keep this user manual for future reference. Pay particular attention to the safety instructions. If
you have any questions or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]

4
Package List
User Manual ×1
Mic Holder
with 5/8“-3/8“ Connector ×1
Protection Box ×1
Windscreen ×1
XLRM-XLRF Cable ×1
SYNCO Mic-D2 Microphone ×1

5
Feature Introduction
•Shotgun Directional Microphone with High Sensitivity
•Hyper Cardioid Pattern, Great Pickup Effect
•Solid Brass Body, Highly Anti-Interference
•Extremely Low Self-Noise
•Ultra-flat Frequency Response
•3-Pin XLR Connector
•Wide Usage Occasions
•Mini MIC Holder with 3/8” and 5/8” Connector
•Original Sound Reproduction

6
Caring for Your SYNCO Microphone
•Please keep the product in a dry, clean, dust-free environment.
•Keep corrosive chemicals, liquids and heat source away from the product to prevent
mechanics damage.
•Use only a soft and dry cloth for cleaning the product.
•Malfunction may be caused by dropping, impact of external force.
•Do not attempt to disassemble the product. Doing so voids warranty.
•Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
•Failure to follow all the instructions may result in mechanics damage.
•Warranty does not apply to human errors.

7
Mounting the Shotgun Mic
1. The MIC-D2 microphone can be mounted
on a boom pole or tripod through a mini
holder with 3/8" and 5/8" connector.
2. A cotton windshield will minimize the
environmental noise when shooting videos.
3. A 19.7 inches XLRM - XLRF cable connecting
the mic to other equipments.
4. Mount on a camcorder.

8
Specifications
Polar Pattern: Hyper Cardioid

9
Frequency Response

10
Parameters
Element
Back Electret Condenser
Polar Pattern
Hyper-Cardioid
Frequency Response
20Hz –20kHz
Bass
Built-in
Sensitivity
-32dB±3dB (1dB = 1V/Pa at 1kHz)
Output Impedance
450Ω±20% (at 1kHz)
Max. Input SPL
130dB (T.H.D≤1% at 1kHz)
Signal to Noise Ratio
80dB (1kHz at 1Pa)
Dynamic Range
117dB (1kHz at Max SPL)
Power Requirements
48V DC, 2 mA
Weight
165g
Body Dimensions
1,9×25 cm
Output Interface
XLRM