System air fantech Pro 150 Manual

Installation, Operations, and Maintenance instruction EN
Ceiling Radiation Damper — Large
Radiation Damper for PRO 150, PRO PLUS, PRO-PLUS-L, and Select Series Ceiling
Exhaust Fans

1 Introduction
1.1 Product Description
This product is a Ceiling Radiation Damper with a metal casing.
If there is a fire, it will close automatically when the heat in the
air reaches 175°F (79°C) to contain the fire.
This product is UL classified for use in up to 3 hour rated floor/
roof ceiling designs.
1.2 Intended Use
Use this product only in the manner intended by Fantech. If you
have any questions, please contact a Fantech representative.
1.3 Document Description
This document contains instructions for installation, operation
and maintenance of the product. The procedures must be done
by approved personnel only.
Speak to a Fantech representative for more information on how
to install the product in different installation locations.
1.4 Fantech Warranty
Make a scan of the code above to access Fantech’s warranty
in English, French, or Spanish. This product has a 1 year
warranty.
If additional support is needed to retrieve the warranty, visit fan-
tech.net; call (800) 747–1762 (US), (800) 565–3548 (Canada),
or [phone] (Latin America); email support@fantech.
net; or mail us at 10048 Industrial Blvd, Lenexa, KS 66215
United States or at 50 Kanfläkt Way, Bouctouche, NB E4S 3M5
Canada.
1.5 Product Overview
1
2
1. Ceiling Radiation Damper
2. Screws, quantity 4
1

2 Safety
2.1 Safety definitions
Warnings, cautions and notes are used to point out specially
important parts of the manual.
Warning
If you do not obey these instructions, there
is a risk of death or injury.
Caution
If you do not obey these instructions, there
is a risk of damage to the product, other
materials or the adjacent area.
Note:
Information that is necessary in a given situation.
2.2 Safety Instructions
Warning
This product is intended for general ventila-
tion use only. If you have questions, contact
Fantech. To decrease the risk of fire, elec-
tric shock, or injury, read and obey the fol-
lowing warning instructions before you do
work on the product:
• The ventilation contractor and the opera-
tor are responsible for correctly installing
the product.
• When installing the product, obey all ap-
plicable local conditions and laws, and
fire-rated construction codes and
standards.
• When cutting or drilling into walls or ceil-
ings, watch for electrical wiring and other
hidden utilities to prevent damage.
• Do not clean the product with chemicals
that can cause corrosion or water more
than 60° Celsius (140° Fahrenheit).
• Do not let unwanted objects enter the
product.
2.3 Personal protective equipment
Use personal protective equipment during all work on the
product.
• Approved eye protection
• Approved protective helmet
• Approved hearing protection
• Approved protective gloves
• Approved protective shoes
• Approved work clothing
3 Installation
3.1 To Mount the Radiation
Damper
Note:
This radiation damper is UL classified for use in up to 3 hour
rated floor/roof ceiling designs.
Note:
Make sure the arrow on the nameplate of the radiation
damper points up.
Caution
To avoid damage to exterior finishes and to
allow for easier parts replacement, make
sure screws are installed from the inside.
1If the product has power, disconnect power at the source.
2Engage the hemmed edges of the radiation damper casing
onto the product’s casing.
1
3Align the (4) screw holes of the radiation damper with the
(4) screw holes of the radiation damper casing.
4With the arrow on the nameplate in the “up” position, en-
gage the radiation damper with the bottom of the radiation
damper casing.
2
5Using (4) screws provided with radiation damper assembly,
attach radiation damper to the radiation damper casing.
2

2
1
21
3
1. Screw Hole
2. Provided Screws
Note:
Before this product is mounted, make sure all personnel
knows that installing the radiation damper will increase the
size of this product. Adjust how this product is installed as
specified in the applicable procedure.
A
2
1
1. Screw Hole
2. Screw
4 Technical data
4.1 Product Dimensions
AB
C
Note:
Dimensions are given in inches (mm).
A B C
Ceiling Radiation
Damper — Large,
#98600
11–1/2
(292) 12 (305) 2–1/2 (64)
3

Document in original language 2023-03-20
499191 - 001
© Copyright Fantech
All rights reserved
Fantech reserves the rights to alter their products without notice. This also applies to products already ordered, as long as it
does not affect the previously agreed specifications.
USA
[phone]
[email protected]
Canada
[phone]
[email protected]
Latin America
[phone]
[email protected]
last page