Takara Belmont Square EPIPHANY User manual

Frame EPIPHANY

SCALE 1.000
1. Locate and remove the attached screws from the underside of the chair top > 2. Attach the base and pump to the
position where the screws were attached > 3. Tighten firmly > 4. Check that the top chair is attached securely.

OPERATION INSTRUCTIONS

Inspect Test method Defective results
Stability
of chair
and base >
Gently push or shake the
top of the backrest in all
directions, observing any
instability >
If you find the chair to
be unstable, do NOT use
it. Contact your dealer
or Takara Belmont for
advice.
Moving and
lockable parts
>
Use the foot pedal to
adjust the chair height,
checking that the chair
stops and locks at the
desired position without
sinking down >
If the chair does not stop
at the desired position, do
NOT use it. Contact your
dealer or Takara Belmont
for advice.
Function
without
obstruction >
Check that the chair does
not produce abnormal
sounds during rotation
and height-adjustment >
If the chair produces
abnormal sounds, do
NOT use it. Contact your
dealer or Takara Belmont
for advice.
Hydraulic Chair Manual for Frame_2016.6
© All Rights Reserved