Takara Belmont ZEN MIRROR User manual

ZEN MIRROR
1
DescriptionofWarningSymbols
SafetyPrecautions
PrecautionsforUse
BeforeUsingThisProduct
Accessories
NameofEachPart
Dimensions
Beforeinstallation
Installation
Dailymaintenance
DailyInspection
StandardDurationofUse
ConsumableSupplies
DisposingoftheProduct
After-salesService
Specifications
MEMO
Information
２
２
４
５
５
５
６
９
９
１２
１３
１３
１３
１３
１３
１４
１５
１６
ThankyouforpurchasingthisTakaraBelmontproduct.
Theinstructionscontainedinthisbookletshouldbe
thoroughlyreadandunderstoodbeforeuse.
Usingthisproductbeforereadingthisoperatinginstructions
mayresultinanaccident.
Thisproductisanindustrialmirrorunitdesignedforbarbers
andhairsalons.Onlyusethisproductforitsintendedpurpose
anddonotuseitfornon-hairdressingwork.
Keepthisinstructionandreferbacktothemwhenrequired.
Install/OperatingManual
TableofContents
■ZENMIRROR ＜Single-sidedwallmounting＞
①Double-sidedfree-standingframe
②Single-sidedfree-standingframe
③Single-sidedwallmountingframe
④Double-sidedfree-standingmirror
⑤Single-sidedfree-standingmirror
⑥Single-sidedwallmountingmirror
⑦Topboard-White
⑧Topboard-Naturalbrown
⑨Topboard-Natural
＜Single-sided
free-standing＞
＜Double-sided
free-standing＞
①
④
②
③
⑤
⑥
⑦⑧⑨
⑦⑧⑨
⑦⑧⑨
To the installer
•Theinstructionsshouldbethoroughlyreadandunderstood
beforeinstallationtoensurethatZENMirrorUNITisinstalled
correctly.
•Afterinstallation,givetheseinstructionstothecustomer.
To the customers
•CustomersmustaskprofessionaltoinstallZENMirrorUNIT.
•CustomersmustnotinstallZENMirrorUNITbythemselves.
•Customersmuststoretheseinstructionsinasafeplacesoas
nottolosethem.
*TheactualshapeofZENMirrorUNITandtheimagesand
dimensionslistedintheseinstructionsmaybemodifiedand
aresubjecttochangewithoutnotice.
Version 1 February 2018

Warning
2
Clean by standing on a steady step-
ping stool or ladder.
While cleaning the upper part of the product,
usestablestepladder.
Bewareoffallingandinjuringyourself.
Do not push, lean on, stand on or
hang from the product.
Donotpush,leanon,standonandhangfrom
theproduct.
Itmaycauseaccidentssuchasafallwhichcould
causeinjuriesorbreakageoftheproduct.
Thisproductisspecificallydesignedforusein
barbershops,beautysalons,andestheticsalons.
Donotusethismirrorforpurposesotherthan
usingitincombinationwithhairheaters,
shampoo
machines,orotherdevicesforhair-cutting,
shampooing,haircoloring,perming,oresthetic
treatment.Itmaydamagethemirrororresultin
accidents.
Install in a stable place.
Ensure that the product is installed and firmly
attachedontoaflatandsolidfloororwall.
Bewareofthedangeroftheproductfallingand
injuringyou.
Make the wall with adequate strength.
Thisproductisfixedwithtappingscrewdirectly
ontothewall.
Inthecaseofthewallmountedversion,prepare
aconcretepanelofmorethan12mmthickness
orabasebattencleatwiththeequivalent
strength.
■Symbols
■Precautions listed here
■Before the use of the product
Description of Warning Symbols
Safety Precautions
The"SafetyPrecautions"and"PrecautionsforUse"containedinthisbookletshouldbethoroughlyreadandunder-
stoodbeforeuse.
Theprecautionslistedherearetoensurethatthisproductcanbeusedsafely,andtopreventanydangerorriskto
thepersonusingthisproductorthosearoundthem.
Theseprecautionsareimportantforensuringsafety.Adheretotheseprecautionsatalltimes.TakaraBelmontisnot
responsibleforanydangerorrisktothepersonusingthisproductorthosearoundthemduetoaccidentsifthis
productisusedwithoutadheringtothe"SafetyPrecautions"and"PrecautionsforUse".Inthiscase,theperson
failingtoadheretothe"SafetyPrecautions"and"PrecautionsforUse"willberesponsibleforanydangerorrisk
incurred.Detaileddescriptionsofsymbolsareprovidedbelow.Readandunderstandthesesymbolsthoroughly
beforereadingthismanual.
Warning
Caution
Ifthissymbolisignoredandtheproductisused,"thereistheriskofdeathorserious
injurytotheuser".
Ifthissymbolisignoredandtheproductisused,"thereistheriskoflightormoder-
ateinjuryorphysicaldamage".
Note
Descriptionof"idealpointstoadheretoforsafety".
Commondanger,warningandcaution
notifications
Commonprohibitedactions
Prohibiteddisassemblyorrepairs/modifica-
tions
Guidanceorinstructionregardingcommon
useractions
Donotusethismirrorforpurposesother
thanhair-cutting,beautytreatment,or
esthetictreatment.

Thisproductisspecificallydesignedforusein
barbershops,beautysalons,andestheticsalons.
Peopleotherthanlicensedbarbers,hairdressers,
orestheticiansshouldnotusethismirror.
Hold the mirror frame when wiping
the mirror.
Ifyoudonotholdmirrorframewhenwipingthe
mirror,itmaycauseaccidentsandinjuries.
Do not disassemble, repair, or
modify the mirror.
Onlycustomerservicestaffarepermittedto
disassembleorrepairtheproduct.Neglecting
thiscautionmaycauseaccidentsorinjuries.
3
Warning
Do not sprinkle water on the product.
Becarefultonotsprinklewaterontheproduct.
If water comes into contact with the product,
wipeitoffimmediately.
Be careful of product sharp edges,
corners and irregularities.
Whencleaningtheproductbecarefulofthe
corners,edgesandirregularitiesasitmight
causeinjury.
Do not overload on the sliding tray.
Donotweightheslidingtraydown.
(Staticloadisupto2kgonly)
Donotdropobjectsfromaheight,leanonor
putanexcessiveweightonit.
Itmaycausedamageorbreakagesofthe
product.
Theproductmayfallandcauseinjury.
Do not use any other item except a
hairdryer in the allocated storage
compartment.
Ifstoringmorethantheweightofahairdryerin
theholder,itmaycausedamageorinjury.
Slide the tray in/out slowly.
Whenopeningandclosingthetraydososlowly,
oritmaybreakthetray.
Donotexposetheproducttoshocksorimpacts
duringoperation.Neglectingthiswarningmay
resultinfallingoftheproduct,thuscausing
breakage,orinjuries
Pay attention for carrying.
Do not hold the bottom part of the product
when installing or moving the product. This
couldcause theproducttobeimbalancedand
fall.
Do not allow persons other than
barbers, hair dressers, or estheti-
cians to use this mirror.
Shocks to the equipment in opera-
tion.
Safety Precautions

4
Caution
Precautions for Use
Do not use a strong acid and strong
alkaline detergent.
Donotuseanyharshchemicalswhencleaning
theproduct,itmaycausedamage.
The mirror may be damaged if a sharp object
suchasscissorstouchesthemirror.
Do not put any products with a rough
base directly on the shelf.
Donotplaceanyproductsthathavearough
baseoredgesdirectlyontheshelfasthismay
causedamagetothesurface,whichcould
causeinjury.
Do not use any abrasive.
Donotuseanyabrasiveswhencleaning.
Donotuseaharshcleaningtoolsuchasan
abrasiveoraspongecontaininganabrasive,
ametalscourer,oranylonsewage.Itmaycause
scratches.
Do not use the mirror outdoors.
Themirrorisdesignedforindooruseonly.Do
notplaceitoutdoorsorinvehicles.Alwaysuse
themirrorinsidebarbers,hairsalons,and
stheticsalons.Usingthemirroroutdoorsmay
causedamagetothemirror.
Neglectingthiscautionmayresultindeforma-
tion,discoloration,ordeteriorationoftheuphol-
steryandsurfaces.
Avoid direct sunlight or heat from a
heater.
Wipe the mirror to remove any water
from the mirror after use.
Leavingwateronthemirrormaycausemalfunc-
tion,discoloration,ordamagetothemirror,or
stainsmayremainpermanentlyonthemirror.
Ifchemicalssuchashaircoloradhere,immedi-
atelywipethemoff.Failuretofollowthiscaution
maycausediscolorationordeteriorationofthe
product,or discolorationordamageofsewing
threadsandsurfaces.
Do not place a sharp object on the
mirror.
Donotwipethemirrorwithchemicalswhen
cleaning.Donotapplyheat.Itmaycause
damageordiscoloration.
Ifachemicaladheresontheleatherormetal
part,immediatelywipeitoff.
Do not apply chemicals or heat to
the mirror.
If chemicals adhere, wipe it off
immediately.

5
Accessories
Confirmthebundleditemsbelow.
□Install/ OperatingManual
Name of Each Part
mirrorframe
extensioncordhook
lowerframe
adjuster
slidetable
topboard
dryerholder
holefor
extensioncord
holefor
extensioncord
<Single-sided free-standing> <Double-sided free-standing><Single-sided wall mounting>
extension
cordhook
M6×15trussscrew ............... 10
M5×20panheadscrew.........2
M5hexnut ...................................2
4×40trusstappingscrew ...........6
M4×20panheadscrew.........1
M6×12countersunkscrew
 ...............................4
M6×15trussscrew .......16
M4×12trussscrew ..........2
M5×20panheadscrew ......4
M5hexnut ...........................4
M4×20panheadscrew ......2
M6×12countersunkscrew
............................. 4
M6×15trussscrew ........... 8
M5×20panheadscrew.. 2
M5hexnut ............................ 2
M4×20panheadscrew ....... 1
１ ２１
１ ２１
１
１
Fasteningparts
Dryer holder
Slide table
Wall hook metal
Code rail
Rubber for slide table １ ２１
●TheJISstandardisappliedwhenmanufacturingthemirrors.Duetothis,someunevennesswithinthe
mirrormayoccuronthesurfaceofglass.Pleasenotetheremaybesomeimagedistortionduetothis
process.
●Thefullmirrorisnotfixedwiththeframe,onlythemiddle.Becauseofthis,thetopandbottompartsof
themirror(whentouchingit)willappeartobeloose,thisisdoneintentionally.
Before Using This Product
Single-sided
free-standing
Double-sided
free-standing
Single-sided
wall mounting
mirrorframe mirrorframe
mirror mirror mirror
topboard topboard
dryerholder
dryerholder
slidetable slidetable
lowerframe
adjuster

Wheninstallingtheproduct,use the
adjuster to make the top board
horizontal.
The factory default position of the
adjusteristhelowestpositionofthe
product.
Theheightrangeoftheadjusteris14
mm, this means the height can be
adjustedupto14mm.
Thefigureshowsthedimensionthat
the adjusters are 7mm higher from
thelowestposition(Midwayposition).
6
<Single-sided wall mounting>
150
650
730
205
71
640
120
225 225 98
32
254
286
6787
670
1575 82
1657
907750
30
20
114
709
71
position of screws
to fix the lower frame
200 200
655
7(distance between the mirror and the lower frame)
Dimensions
position of screws
to fix the wall hook metal

7
<Single-sided free-standing>
205 71
71
32
6787
150
254
358
750
1650
900
30
114
20
709
646
121
650
730
640

8
<Double-sided free-standing>
67
87
71
254254
843
540
150
1650
900750
114 30
20
205
650
808
32
640
71
709
237 66
67 87
71
646

9
Before installation
・Beforeinstalling,refertotheproductdimensionsonpages6to8andtodecidethebestmount-
ingposition.
・Inthecaseofthewallmountedversion,thewallsurfacerequiresatleasta12mmthickconcrete
panel.
・Inthecaseofplasterboardsorplywood boards of 12 mm orless,please
reinforcethembyinsertingthegirderatthewallfixingscrewposition.Please
ensurethat2setsperdryerholder,combiningM5x20panheadscrewsand
M5hexnutsasshownontheright.
Requiredtools
・8mmSpanner ・(+)Phillipsscrewdriver
M5hexnut
M5×20panheadscrew
①dryerholder
②
②②
④
⑤
⑤
⑤
lowerframe
slidetable
⑥adjuster ⑥adjuster
③
①
mirrorframe
topboard
cordrail
rubberforslidetable
<Single-sided free-standing / double-sided free-standing >
①Attachthedryerholderreferringtopage11.
②Insertthemirrorframeintothelowerframeandfixit
firmlywithM6countersunkscrew.
③Attachthecordrailtothelowerframewith2xM4truss
screws.(Onlyfordouble-sidedfree-standing)
④AttachtherubberforslidetabletothetopboardwithM4
panheadscrew.Thenattachtheslidetabletothetop
boardwith4xM6trussscrews.
⑤Attachthetopboardtothelowerframewith4xM6truss
screws.
⑥Turntheadjustertomakethetopboardhorizontaland
topreventrattling.
Installation

10
<single-sided wall mounting>
centerline
wallhookmetal
lowerframe
200
670
1575
200
225 225
250 250
323 323
1540
820
655
adjuster
Attachthelowerframetothewallasshowninthefigurebelowandtemporarilyfixwith3xscrewsasshown.
Usetheadjustertomakethetopofthelowerframehorizontal.Thentightenthe3xscrewsfirmly.
Thefactorydefaultpositionoftheadjusteristhelowestpositionoftheproduct.
Theheightrangeoftheadjusteris14mm,thismeanstheheightcanbeadjustedupto14mm.
The figure shows the dimension that the adjusters are 7mm higher from the lowest position (midway
position).
Holdthewallhookmetalhorizontallyandfixitwith3xtappingscrewsprovidedatthepositionshown.
Afterthat,fixthedryerholder,themirrorframe,theslidingtray,thetopboardwiththeprovidedscrewsthe
samewayasthefree-standingtypeinpage9.
fixingscrews