Takara Belmont Dover User manual

Contents
Preparation before Installation
(Specification Drawings)
Usage condition
Parts List / Accessory Parts
Installation Procedure
Safety Precautions
Precautions for Use
Care and Maintenance
2
3
3
4
6
8
9
1
To the installer
• The instructions should be thoroughly read
and understood before installation to ensure
that Dover is installed correctly.
After installation, give these instructions to the customer.
•
To the customers
• Customers must ask proffessional to install Dover.
• Customers must not install Doverby themselves.
• Customers must store these instructions in
a safe place so as not to lose them.
* The actual shape of Dover and the images
and dimensions listed in these instructions may be
modified and are subject to change without notice.
Caution
zThe precautions listed here are to ensure that Dover
can be installed safely, and to prevent any
danger or risk to the person installing Dover
or those around them. All of these precautions are
important for safety. Takara Belmont is not responsible
for any damage or risk to the person installing Dover
or those around them due to accidents if
Dover is installed without adhering to the
precautions.
If Dover is installed after ignoring this symbol,
"there is the risk of light or moderate injury or physical
damage".
Version 1 April 2017
Barber Cabinet & Front wash basin
Operation / Installation manual
Dover
Dover
Dover with Mini Cabi
Note : Plumbing should be performed by a qualified
technician and should meet all national and local
plumbing codes and ordinances. It is the responsibility
of purchaser and/or plumber to conform to national
and local codes and ordinances. Takara Belmont does
not take any responsibility or liability for plumbing and
installation.

2
Preparation before Installation
[mm]
Installation Instruction of water tap included in the package should be throughly read and
understood before use.
Raise the drain pipe, the water supply pipe, and the hot water supply pipe referring to
the following plumbing layout.
z
z
z
<Dimensions>
Prior to installation, determine the installation position of the product referring to the
following drawings.
・Dimensions above may vary in size slightly.
1500 620
835
460
<Plumbing Layout / Power supply>
1500
475
This product has
the drainage pipe
ĭPPRXWVLGHGLDPHWHU
500
100 100
Hot water supply 3/8” male
Water supply 3/8” male
ĭPP
200
'UDLQDJHSLSHĭPPLQQHUGLDPHWHU
needs to be installed in advance.
440
140
440
Power supply
for Mini Cabi
230-240V
50/60 Hz

3
Parts List / Accessory Parts
Maintenance cover
Cabinet unit
<Accessory parts>
Drawer handle x4
/ For Mini Cabi set: x3
Basin top plate
Mixer and Shower head
Drain cap
Bottle trap
M6 Socket countersunk screw x4
(For Basin top plate)
Hexagonal head wrench
Screws for drawers
(Quantity varies depending on handle types)
'UDLQSLSHĭPPRXWVLGHGLDPHWHU
Maintenance kit for Basin top plate
(Polishing cloth for the Basin top plate /
0DLQWHQDQFHPDQXDO
Usage Condition
ŶHot water supply and water supply conditions
Water used
Hot water supply,
water supply
pressure
Hot water
WHPSHUDWXUH
into the product
Water boiler 'RQRWXVHVWHDPZLWKWKHKRWZDWHUVXSSO\
•Public water supply (do not use non-drinkable well water or water that contains
rust or sand.)
,IWKHZDWHUKDUGQHVVLVSSPRUKLJKHULQVWDOODZDWHUVRIWHQHUWRSUHYHQWWKH
EXLOGXSRIVFDOHZLWKLQWKHEDVLQERG\$HUDWLRQPD\EHPLQLPDOZKHQXVLQJ
VKDPSRRHYHQLIGULQNDEOHZHOOZDWHULVXVHGVRDZDWHUVRIWHQHUVKRXOGEH
installed.
8VHDSUHVVXUHEHWZHHQDQG03D4NJIFPEDU
6HWWKHZDWHUVXSSO\SUHVVXUHKRWZDWHUVXSSO\SUHVVXUH
•Set the difference between the hot water supply pressure and water supply
SUHVVXUHWRZLWKLQ03DNJIFPEDU


•6HWWKHKRWZDWHUWHPSHUDWXUHWR°C or less.
6HWWKHWHPSHUDWXUH&RUKLJKHUWKDQWKHVKRZHUWHPSHUDWXUHXVHG

4
Installation Procedure
1. Before installation, with reference to the plumbing layout and the dimensions in this manual,
raise the water supply pipe, hot water supply pipe and drainage pipe.
2. Fix the Mixer and Shower head on the Basin top plate with reference to the manual
included in the package of the Mixer and Shower head.
3. Fix the Drainage cap on the Basin top plate.
4. Lower the Basin top plate onto the Cabinet unit carefully.
Then fix them with 4x M6 Socket counter screw from underneath as below.
Drawer Basin top plate
Cross sectional view

5
5. Fix the Drawer handles to each drawers with screws provided.
(Fixing ways vary depending on the handle types.)
6. Assemble the Bottle trap.
Then detach the Maintenance cover and fix the Bottle trap to the Drain cap.
8. Re-attach the Maintenance cover. / Installation completed.
7. Place the Cabinet unit on the desired place.
Then plumb the water supply pipe, the hot water supply pipe and the drainage pipe.
Bottle trap
Plumbing

Do NOT use this product for back
wash shampooing.
This product is designed only for
front wash shampooing.
Safety Precautions (Adhere to these precautions at all times)
Description of Warning Symbols
Ŷ%HIRUHXVLQJWKLVSURGXFW
Ŷ3UHFDXWLRQVOLVWHGKHUH
Ŷ6\PEROV
Warning
Caution
,IWKLVV\PEROLVLJQRUHGDQGWKHSURGXFWLVXVHGWKHUHLVWKHULVNRIGHDWKRUVHULRXV
LQMXU\WRWKHXVHU
,IWKLVV\PEROLVLJQRUHGDQGWKHSURGXFWLVXVHGWKHUHLVWKHULVNRIOLJKWRUPRGHUDWH
LQMXU\RUSK\VLFDOGDPDJH
&RPPRQGDQJHUZDUQLQJDQGFDXWLRQ
QRWLILFDWLRQV
*XLGDQFHRULQVWUXFWLRQUHJDUGLQJFRPPRQ
user actions
&RPPRQSURKLELWHGDFWLRQV
7KHSUHFDXWLRQVOLVWHGKHUHDUHWRHQVXUHWKDWWKLVSURGXFWFDQEHXVHGVDIHO\DQGWRSUHYHQWDQ\GDQJHURUULVNWRWKH
SHUVRQXVLQJWKLVSURGXFWRUWKRVHDURXQGWKHP
7KHVHSUHFDXWLRQVDUHLPSRUWDQWIRUHQVXULQJVDIHW\$GKHUHWRWKHVHSUHFDXWLRQVDWDOOWLPHV7DNDUD%HOPRQWLVQRW
UHVSRQVLEOHIRUDQ\GDPDJHRUULVNWRWKHSHUVRQXVLQJWKLVSURGXFWRUWKRVHDURXQGWKHPGXHWRDFFLGHQWVLIWKLVSURGXFW
LVXVHGZLWKRXWDGKHULQJWRWKH6DIHW\3UHFDXWLRQV3UHFDXWLRQVIRU8VH
,QWKLVFDVHWKHSHUVRQIDLOLQJWRDGKHUHWRWKH6DIHW\3UHFDXWLRQV3UHFDXWLRQVIRU8VHZLOOEHUHVSRQVLEOHIRUDQ\
GDPDJHRUULVNLQFXUUHG'HWDLOHGGHVFULSWLRQVRIV\PEROVDUHSURYLGHGEHORZ
5HDGDQGXQGHUVWDQGWKHVHV\PEROVWKRURXJKO\EHIRUHUHDGLQJWKLVPDQXDO
CAUTION
Hot water
3URKLELWHGGLVDVVHPEO\RUUHSDLUVPRGLILFDWLRQV
1RWLILFDWLRQRIKLJKWHPSHUDWXUHZDUQLQJ
Disassembly
Prohibited
'HVFULSWLRQRILGHDOSRLQWVWRDGKHUHWRIRUVDIHW\
Note
7KH6DIHW\3UHFDXWLRQV3UHFDXWLRQVIRU8VHVKRXOGEHWKRURXJKO\UHDGDQGXQGHUVWRRGEHIRUHXVH
Warning
Install on a stable area
,QVWDOOWKHPDLQERG\RQDIODWILUPIORRUDQGIL[LW
VHFXUHO\)DLOXUHWRIROORZWKLVLQVWUXFWLRQPD\
FDXVHWKHPDLQERG\WRIDOORYHU
6

Do not use this product if the coating
is peeling.
Replace the water taps if the coating is peeling.
continuing to use this product when the coating
is peeling may cause injury.
Do not spray areas except for the
basin with water.
zTake care not to spray areas other than the
basin with water. If water does come in contact
with areas other than the basin, wipe them dry as
soon as possible. Water entering the main body
may cause malfunctions or a ground leakage fire.
7
Caution
Do not use the product in a place
where freezing is expected.
Failure to take this precaution may result in
breakage of parts, thus resulting in water leaks.
Repair of breakage due to freezing will result in
fees being charged even during the warranty
period. If freezing is expected, maintain the room
temperature at 0Υor above by using a heater.
Do not drink the hot water.
This product is designed for washing hair.
Do not drink the hot water.
Do not touch the hot water supply
pipe or mixing pipe.
The hot water supply pipe or mixing pipe may
become very hot. Do not touch the pipes directly.
Only use this product for its intended
purpose and do not use it for
non-hairdressing work.
This product is an industrial product designed for
barbers and hair salons. Only use this product for
its intended purpose and do not use it for
non-hairdressing work.
Do not use outdoors.
This product is designed for indoor use. Do not
install this product outdoors or within a vehicle.
Be sure to only use this product inside barbers or
hair salons. Failure to follow this instruction may
cause malfunctions or damage to the product.
Do not subject the unit to shocks.
Do not subject the unit to shocks. Failure to
follow this instruction may cause damage,
leading to injury.
Do not turn the water fully on with the
shower head in the shower head bracket.
Failure to follow this instruction may cause water
to spill out of the basin, covering the customer
with water. When turning the water on with the
shower head in the shower head bracket, check
the surrounding area and turn the water stop
knob slowly.
zTake care not to allow water to drip on the floor.
If water does drip on the floor, wipe it dry as soon
as possible. Failure to follow this instruction may
damage the floor, or cause water leakage.
Warning
Adjust the water temperature while
checking the temperature by hand.
When adjusting the temperature of the water,
reduce the volume of water, point the shower
head away from the customer and check the
temperature by hand. Take care when doing so,
as hot water may come out of the shower head.
Disassembly and
repairs/modifications are prohibited.
Disassembly, repairs and modifications must not
be conducted by people other than qualified
repair technicians.
Disassembly
Prohibited
Do not use hot water (boiling water)
of 60 °C or higher.
Using hot water of 60 °C or higher may deform or
damage the parts such as the basin, shower head
and water stop knob.
CAUTION
Hot water
Do not climb on this product.
Do not lean on the basin.

8
Caution
Precautions for Use
Do not use peppermint or aroma oil.
Do not use peppermint or aroma oil containing
menthol. Failure to take this precaution may
damage the resin parts, such as the showerhead,
shower hose, hair catcher, and drain cap.
Do not use strongly acidic or
strongly alkaline cleaning solvents.
Do not use cleaning solvents containing mainly
caustic soda (NaOH) or caustic potash (KOH) to
clean the drain pipe. Never pour thinners, alcohol,
nail polish remover, gasoline or kerosene into
the drain.
Do not use an abrasive compound
on the metal surfaces and wood
surfaces.
If chemicals spill on to this product,
wipe them dry as soon as possible.
If chemicals such as hair dyes spill on to this
product, wipe them dry as soon as possible.
Always wipe the floor clean if it is wet.
Do not cover the drain outlet when
this product is not going to be used.
Do not cover the drain outlet after finishing
the work. Water may overflow the basin when
water is improperly discharged or a small amount
of hot water is discharged due to an increase in
water pressure during the night, resulting in
water leaks.
Be sure to remove the trap cover from the drain
outlet when the product is not in use.
Avoid direct sunlight or heat from a
stove.
Avoid direct sunlight or heat from a stove. Failure
to follow this instruction may cause discoloration
or degradation of the wood body and resin
materials.
After use, wipe water away from all
parts except for the basin.
Leaving the main body with water on it may
cause damage, and make dirt difficult to remove.
Do not leave the shower head
immersed in water.
If pressure in the water pipes decreases due to
repairs that follow water stoppages, the water in
the basin may flow back through the shower head.
Do not wipe with chemicals or apply
heat.
Do not drop heavy objects on to the
Basin top plate.
Do not place or drop heavy objects on to the
Basin top plate. Failure to follow this instruction
may cause damage such as scratches or cracks
to the basin.
Pay attention to maintenance methods.
Be sure to execute daily maintenance according
to the section "Maintenance" on page.
In the case of insufficient or improper
maintenance or when periodically replaced parts
are not replaced, the customer shall be
responsible for any harm, damage, or defects
that result; our company shall not assume
responsibility.

Caution
Precautions on Resin (Plated) Parts
Check to ensure that there are no flaws, cracks, or peeling of the plated surface
before using the product. If peeling is observed, immediately stop using the product and
contact your closest dealer or Takara Belmont. Continued operation may result in injuries.
• Resin plating is adopted for part of the Mixer and Shower head and the Drain cap.
ࠐ Plating is a thin, hard metal film applied to the surface that may crack or peel due to corrosion or
aged deterioration.
ࠐ Flaws or cracks may occur on the plated surface due to impacts from falling objects.
ࠐ Flaws or cracks may occur on the plated surface when a hard object hits the surface.
ࠐ Peeling of the plating may occur from flaws or cracks on the plated surface.
Example of flaws
on the plated surface
Example of peeling of
the plated surface
Never use volatile chemicals such as thinners, alcohol, gasoline or kerosene,
detergents that include organic solvents, acidic, alkaline or chlorine-based detergents.
Failure to follow this instruction may cause scratches or discoloration.
Caution
Thinner
Chemicals
Alcohol
Kerosene
Care and Maintenance
ࠐDust the surface and remove stain.
Wipe the surface with soft and dry cloth. If the stain is hard to remove or oil is spotted,
wipe with cloth soaked in dilluted neutal detergent and wringed.Then wipe it with dry cloth.
ࠐIf the Basin top plate get stains, rub and remove it softly
with the polishing cloth supplied with this product.
Do NOT use the polishing cloth on surfaces except for the Basin top plate.
9
TAKARA BELMONT (UK) LTD.
BELMONT HOUSE, ONE ST.ANDREWS WAY, BOW
LONDON E3 3PA, UNITED KINGDOM
http:// www.takarahairdressing.co.uk
TEL: [phone]
Polishing cloth
Stain