Tamerica TCC1400F+ User manual

1
TCC-1400F+ ASSEMBLY
A– 6 pieces (Attaches left & ri ht bracket to the laminator)
B– 2 pieces (Attaches idlin bar to the left and ri ht bracket)
C– 8 pieces (Stand assembly)
D– 4 pieces (Attaches stand to the laminator)
A B C D

2
C – 8 PIECES
Attached the 2 horizontal brackets to the left & ri ht le s of the stand.

3
1. Attach the horizontal brackets to the ri ht le first but don’t fully
ti hten the screws.
2. Attach the horizontal brackets to the left le .
3. Ti hten all screws.

4
Bottom of laminator
Top of stand
1. Put the laminator on
top of the stand.
2. Li htly attached all 4
screws first before
ti htenin .
Screw “D”

5
Attach the ri ht side then the left side before
ti htenin all screws.

6
Attach the ri ht bracket to the ri ht side of the
laminator usin screw “A”.

7
Attach the left bracket to the left side of the
laminator usin screw “A”.

8
Attach the idlin bar to the left and ri ht bracket
usin screw “B”.

9

NO. PART NO. DESCRIPTION NO. PART NO. DESCRIPTION
1 15C-M HEAT SINK (ALUMINUM) 53 RLM-50 FUSE SET
2 3H1-BP9-A ISOLATION_PAD 54 RLM-53-SR WIRE JACKET
3 3H1-D30 THERMO 55 RLM-54 PAD
4 3H1-D33 TEMPERATURE SENSOR_WITH_WIRE 56 RLM-55 PAD
5 3H1-P11 BAKELITE SHEET 57 RLM-60 FIXED POLE
6 3H1-P8-2S-110-400 HEATER 58 RLM-62 TRANSFORMER
7 3H1-P8-3B FIXED_SCREW 59 RLM-14L TOP ROD
8 3H1-P8-V QUARTZ_TUBE 60 RLM-14L-1 BOTTOM ROD
9 CB-3 GUIDE_SCREW 61 RLM-15S EXPAND SHAFT Ø5
10 D209-EP-31 POWER_WIRE 62 RLM-15S EXPAND SHAFT Ø5 (REVISE)
11 D266-D-1 LIMIT_SWITCH 63 RLM-15S-2 EXPAND SHAFT (MOVABLE)
12 D266-H-1 WIRE (MOTOR SWITCH TO MOTOR RED) 64 RLM-16L FIXED SHAFT(REVISE)
13 D266-I-1 WIRE (MOTOR SWITCH TO MOTOR BLACK/LIMIT SWITCH) 65 RLM-16S-1 FIXED SHAFT
14 D266-K WIRE (POWER SWITCH TO WIRE P AND POWER CORD WHITE) 66 RLM-17S ADJUSTMENT SHAFT
15 D266-L WIRE (POWER SWITCH TO PCB) 67 RLM-27T CONTROL PANEL
16 D266-M WIRE (POWER SWITCH TO FUSE SET) 68 RLM-28T BUTTON NAMEPLATE
17 D266-N WIRE (UPPER & LOWER HEATER) 69 RLM-2HC-2 BUSH_SPROCKET_1400F
18 D266-O-1 WIRE (HEATER TO PCB) 70 RLM-2T TOP/ BOTTOM ROLLER
19 D266-P WIRE (WIRE K AND POWER CORD WHITE TO PCB) 71 RLM-2T TOP/ BOTTOM ROLLER
20 D266-Q CUT-OFF FUSE 72 RLM-33A SIDE GUIDE (R)
21 D266-Q-1 WIRE (WIRE Q TO PCB) 73 RLM-37A PROTECTIVE_SHEET
22 D273-2" CONTROL_JACKET 74 RLM-37N SLITTER
23 D2A7 TORODIAL_RING 75 RLM-38N SLITTER
24 D509040070400 E SCREW 76 RLM-59L SHIELD
25 EP-10-10A FUSE 77 RLM-9L MIDDLE GUIDE PLATE
26 FD-39 BUSH_SQUARE 78 RLM-B18-I REAR PLATE
27 HP-10 CAP 79 RLM-B19-I INNER COVER
28 HTC-9 LINER_ADAPTER 80 RLM-B1N BRACKET (R )
29 HTC-10N LINER_BOLT 81 RLM-B20-1 FRONT ROLLER SPROCKET (20T)
30 HTC-10N-1 BUSH 82 RLM-B20-2 REAR ROLLER SPROCKET(19T)
31 HTC-10N-2 SPACER 83 RLM-B20-3 MOTOR SPROCKET (20T)
32 HTC-8N-1 SPROCKET(17T) 84 RLM-B22 SIDE COVER（R）
33 P6KE30CA VARISITOR 85 RLM-B22-1 SIDE COVER（L）
34 R13-220BA MOTOR CONTROL SWITCH 86 RLM-B25 CU BUSH
35 RLM-5 DC MOTOR (DC 24 N1:75) 87 RLM-B29 THANSMIT PARTS
36 RLM-10 FEEDING PLATE 88 RLM-B2N BRACKET (L )
37 RLM-12 FEEDING PLATE 89 RLM-B3-I FEED TRAY
38 RLM-13 PAD 90 RLM-B4 FIXING PLATE FOR HEATER
39 RLM-14-1F+ LINER_ROLL 91 RLM-B42 SPRING (REAR)
40 RLM-21 FIXING PLATE 92 RLM-B42-1 SPRING (FRONT)
41 RLM-23 KNOB 93 RLM-B45 CHAIN
42 RLM-26 PANNEL RACK 94 RLM-B45-1 CHAIN
43 RLM-27-1-B PCB 95 RLM-B6 PRESS PLATE
44 RLM-27-2-B LED PCB 96 RLM-P1-1F UPPER BRACKET (L)
45 RLM-27-3 CONNECT_WIRE 97 RLM-P1-2F UPPER BRACKET (R)
46 RLM-32 HANDLE_TC_2700 98 RLM-P61-7 WHEEL
47 RLM-33 SIDE GUIDE (L) 99 RLM-P61-H STAND
48 RLM-39 SPACER SUPPORT 100 RLM-P63-II BAR
49 RLM-43-1 SPRING 101 RLM-W1 PAD
50 RLM-44 CORE GRIPPER 102 S3-D13-1 QUARTZ TUBE CAP
51 RLM-47-1 BLADE 103 SB-4 FOOT
52 RLM-48 黑色 POWER SWITCH 104 TB-10 PAD
TCC-1400F+ PART MANUAL