Target salk TGTRAPCS01 User manual

>>
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
salk
counter stool
assembly instructions
style # TGTRAPCS01 (brown)
dpci # 249-01-3918
tcin # 52379449
style # TGTRAPCS07 (espresso)
dpci # 249-01-4813
tcin # 52978439
style # TGTRAPCS02 (black)
dpci # 249-01-4144
tcin # 52379466
style # TGTRAPCS03 (smoke)
dpci # 249-01-4809
tcin # 52978435
style # TGTRAPCS04 (gunmetal)
dpci # 249-01-4810
tcin # 52978413
style # TGTRAPCS05 (herbal)
dpci # 249-01-4811
tcin # 52978430
style # TGTRAPCS06 (linen)
dpci # 249-01-0061
tcin # 52978437

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.

3
table of contents
introduction 2
hardware 4
parts list 5
assembly 6-8
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 4
long at head bolt
(H2) x 4
short at head bolt
(H3) x 2
round head bolt
(H4) x 1
large allen wrench
(H5) x 1
small allen wrench
(H6) x 4
stand-off
(H7) x 4
stand-off cap

exploded diagram
ITEM DESCRIPTION QUANTITY
A seat 1
B leg 2
C foot rest 1
5

6
step 1: attach legs and stand-offs
(H3) x 2
round head
bolt
(H6) x 4
stand-off
(H4) x 1
large allen
wrench
1.1. Align bolts with pre-drilled holes.
1.2. Do not over tighten bolts.
1.3. Slide stand-offs onto legs.

step 2: attach foot rest
(H2) x 4
short at head
bolt
(H5) x 1
small allen
wrench
2.1. Align bolts with pre-drilled holes.
2.2. Do not over tighten bolts.
7
front

step 3: attach seat
(H1) x 4
long at head
bolt
(H5) x 1
small allen
wrench
(H7) x 4
stand-off cap
3.1. Align bolts with pre-drilled holes.
3.2. Do not over tighten bolts.
3.3. Push stand-off caps into stand-offs.
8

WARNING
Not for commercial use.
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
9
250 lbs.
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.