Target Narrow bookcase canarrbkes User manual

narrow bookcase
espresso
style # canarrbkes
dpci # 249-14-0039
ebony
style # canarrbkeb
dpci # 249-14-0041
cherry
style # canarrbkmt
dpci # 249-14-0366
chestnut
style # canarrbkch
dpci # 249-14-0359
white
style # canarrbkwh
dpci # 249-14-0363
midtone cherry
style # canarrbkmt
dpci # 249-14-0366
>> assembly instructions

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re confident you won’t need it.
tools needed
Before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) for service.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.

3
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for service. For faster service, have the style number and DPCI number ready when calling.
Table of Contents
Introduction 2
4
5
6
7-13
Hardware
Parts list
How to use the cam lock system
Assembly

4
hardware
(H1) x 27
cam
(H4) x 27
cam bolt
(H5) x 20
wooden dowel
(H6) x 27
short pan-head screw
(H2) x 12
shelf support
(H3) x 1
wall anchor
(H9) x 1
strap
(H7) x 4
small flat-head screw
(H8) x 1
38mm wa;; screw
(H10) x 1
15mm pan-head screw
(H11) x 2
5/8” washer

1
1
1
1
1
1
3
1
3
1
1
1
1
Top panel
Left side panel
Right side panel
Back panel
Bottom panel
Middle fixed shelf
Adjustable shelves
Bottom front stretcher
Adjustable shelf stretchers
Middle front fixed stretcher
Decorative molding
Top front stretcher
Middle back fixed stretcher
Z
Y
X
R
Q
P
O
M
L
K
F
E
D
5
ITEM DESCRIPTION QUANTITY
Z
R
E
O
Q
F
O
O
K
D
L
L
L
M
P
Y
X

how to use the cam lock system
.3
.1
4. .
6
.5
180º
6
2.

step 1.
7
1. Carefully tap wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
(H1) x 11
cam
(H5) x 9
wooden dowel
(H4) x 11
cam bolt
P
K
D
Q
E
P
M
K
D
Q
M
Y

step 2.
1. Carefully tap wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
(H1) x 5
cam
(H5) x 6
wooden dowel
(H4) x 5
cam bolt
8
X

(H7) x 4
small flat-head screw
9
step 3.
1. Do not over tighten screws.
F

step 4.
(H1) x 5
cam
10
1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
(H5) x 2
wooden dowel
(H4) x 5
cam bolt
Z

screw hole for tip kit
step 5.
11
(H6) x 27
short pan-head screw
R
1. Do not over tighten screws.
Place the back panel evenly
Make sure the screws go through the pre-drilled holes properly
Tighten the remaining screws.
!
WARNING
Seriousor fatal crushing injuries can occur
fromfurniture tip-over. To help prevent tip-
over:
-Installtip-over restraint provided.
-Placeheavy items on lower shelves and as
far ba ck as possible.
-Placeheaviest items in the lowest drawers.
-Unlessspecifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Neverallow children to climb or hang on drawers,
doo rs, or shelves.
-Neveropen more than one drawer at a time.
(OR)
-Donot defeat or remove the drawer interlock system.
Useof tip-over restraints may only reduce,
butnot eliminate, the risk of tip-over.
Thisisa permanent label. Do not remove.

step 6.
2. Insert shelf supports into desired hole. Different holes accommodate different shelf heights
1. Attach parts L to parts O. Refer to page 6 for instructions on how to use the cam lock system.
3. Angle shelves to fit between the rails and set on top of shelf supports.
(H2) x 12
shelf support
12
(H1) x 6
cam
(H5) x 3
wooden dowel
(H4) x 6
cam bolt
x3
L
O
O
O
O

step 7.
13
(H3) x 1
wall anchor
(H8) x 1
(H9)
(H10)
38mm wall screw
(H9) x 1
strap
(H11)
(H10) x 1 (H11) x 2
15mm pan-head screw
Fasten anti-tip strap
Position against wall
Mark position of strap hole on
wall
Drill 1/4’’ hole
Tap in wall anchor
(H8) (H11)
(H3)
5/8” washer
!
WARNING
Seriousorfatalcrushinginjuriescan occur
fromfurnituretip-over. To help prevent tip-
over:
-Installtip-over restraint provided.
-Placeheavyitemson lower shelves and as
far backaspossible.
-Placeheaviestitemsin the lowest drawers.
-Unlessspecificallydesignedto accommodate,
donot set TVs or other heavy objectson top of
this product.
-Neverallow children to climb orhang on drawers,
doors,or shelves.
-Neveropen more than one drawerat a time.
(OR)
-Donot defeat orremove the drawer interlocksystem.
Useoftip-over restraints mayonly reduce,
butnoteliminate, the risk of tip-over.
Thisisapermanentlabel. Donot remove.

14
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for service. For faster service, have the style number and DPCI number ready when calling.
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result
in excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
65 lbs.
per shelf
!WARNING
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent tip-
over:
- Install tip-over restraint provided.
- Place heavy items on lower shelves and as
far back as possible.
- Place heaviest items in the lowest drawers.
- Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
- Never allow children to climb or hang on drawers,
doors, or shelves.
- Never open more than one drawer at a time.
(OR)
- Do not defeat or remove the drawer interlock system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is a permanent label. Do not remove.

© 2014 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.