Target BALI LOUNGER WITH CUSHION User manual

1
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
ASSEMBLY INSTRUCTIONS
BALI LOUNGER WITH CUSHION

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that
may damage the product.
2. Take care when liing.Product should be assembled as near as possible to
the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instrucons carefully before beginning assembly.
5. The packaging and contents can be a choking hazard, therefore keep out of
reach of small children at all me.
6. Do not over ghten the screws and bolts as this may damage the threads.
7. Failure to follow the above instrucons may result in damage and or the
incorrect assembly of the furniture.
2
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
2
20 2

3
COMPONENTS / HARDWARE
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
1pc
1pc
1pc
13pcs
1pc
ABC
DEF
M6*20
12pcs
G
1pc
H
13pcs
I
1pc
J
1pc
M6*35

4
STEP 1
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
A
E
F
H
B
C
ALIGN HOLES IN PART B,PART C OVER THREADS IN PART A,
ATTACH PART B,PART C TO PART A USING BOLTS AS SHOWN BELOW.

5
STEP 2
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
EFH
D
ALIGN HOLES IN PART D OVER THREADS IN PART B,PART C,
ATTACH PART D TO PART B,PART C USING BOLTS AS SHOWN BELOW.

6
STEP 3
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
E
G
H
ALIGN HOLES IN PART D OVER THREADS IN PART A,
ATTACH PART D TO PART A USING BOLTS AS SHOWN BELOW.
COMPLETELY TIGHTEN ALL BOLTS AT THIS POINT.

7
STEP 4
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
J
YOUR LOUNGE IS READY FOR USE.

8