Techni Mobili RTA-7337 User manual

MODEL RTA-7337
MODEL RTA - 7337
Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
ASSEMBLY INSTRUCTIONS
This product comes in 2 boxes.

RTA-7337
DIMENSIONS
MAXIMUM WEIGHT CAPACITIES
DO NOT exceed this limit
Please use care and good judgement
when placing objects on wood surface
Product Size: 49"W x 25"D x 47 1/2"H
Product Net Weight:61.73 lbs

RTA-7337 P.3

1 2 3
456
7
X6
X3
1
1
4
8
3
5
6
7
X4
8
RTA-7337 P.4
Long Structure
X2
Support Tube Long Tube
Metal Panel Short Structure Back Support Tube
Glass Table Top Connect Tube
X2

1
1
2X6
X12
C
A
6X40MM
A
B
C
4
PART QTY. ITEM PART QTY. ITEM
D
1
RTA-7337 P.5
6X40MM
22
4
1
6
E
6X55 MM
6X35MM
6X12MM
6X30MM
12
8X4
X8
C
A
6X40MM
1
1
Use screws A to assemble
the Support Tubes (2)
to the Long Structures (1).
Use screws A to assemble
the Connect Tubes (8) to
the Long Structures (1).
4
1
1
X3
3
3
1
1
X4
C
B
6X55MM
3 4
Place the Metal
Panels (4) over
the support
Tubes (2) as
shown.
Use screws B to assemble
the Long Tubes (3) to the
Long Structures (1).
TO ALLOW FLEXIBILITY AND ENSURE PROPER ALIGNMENT OF ALL PARTS, SCREW
LOOSELY AND DO NOT TIGHTEN ANY OF THE SCREWS UNTIL THE END OF STEP No.7!

RTA-7337 P.6
3
5
3
X2
C
A
6X40MM
5Use screws A to assemble the Long Tubes (3) to
the Short Structure (5).
OR
There are two assemble options while you assemble the
Back Support Tubes (6) in step 6.

RTA-7337 P.7
51
X4
C
C
6X35MM
X1
C
D
6X12MM
6
Use screws C to assemble the Back Support Tubes (6)
to the Long Structure (1) and Short Structure (5).
Use screw D to fix the Back Support Tubes (6).
3
3
7
X6
C
E
6X30MM
7
Use screws E to assemble the Glass Table Top (7)
to the Long Tubes (3).
Tighten all the screws and enjoy your unit!

English
- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT OR EXTREME
ENVIRONMENTAL CONDITIONS. ANY DAMAGE RESULTING FROM SUCH
EXPOSURE IS NOT COVERED BY THE PRODUCT’S WARRANTY.
- THE PREFERABLE METHOD TO CLEAN THE SURFACES IS TO WIPE THEM
USING A SOFT CLOTH DAMPENED WITH A SOLUTION SOAP AND WATER,
THEN DRY WITH A CLEAN TOWEL.
- DO NOT SPRAY SOLVENTS OR CLEANING AGENTS DIRECTLY OVER THE
SURFACES, STRUCTURAL TUBES OR METAL PARTS.
- DO NOT LEAN, SEAT OR STAND OVER THE UNIT.
- DO NOT ALLOW CHILDREN TO PLAY OVER/UNDER THE UNIT, NOR ALLOW
THEM TO REACH INSIDE ANY COMPARTMENTS WITHOUT THE SUPERVISION
OF AN ADULT.
- BEFORE MOVING OR TRANSPORTING THE UNIT, MAKE SURE THAT:
ALL HEAVY OBJECTS OR THAT MIGHT FELL OFF ARE REMOVED FROM
THE UNIT.
IF THE UNIT ARE ON CASTERS (WHEELS), MAKE SURE THAT ALL ARE
UNLOCKED.
THE UNIT MUST BE HANDLED BY AT LEAST 2 PERSONS.
WHEN LIFTING THE UNIT, USE BOTH OF YOUR HANDS, AND BEND YOUR
KNEES. REMEMBER TO ALWAYS LIFT WITH YOUR LEGS, NOT YOUR BACK.
- IN CASE OF DAMAGE TO ANY PARTS, NOTIFY THE VENDOR AS SOON AS
POSSIBLE.
- IN CASE OF GLASS BREAKAGE (IF THE UNIT HAS A GLASS TABLE TOP OR
PARTS MADE OF GLASS) DO NOT HANDLE THE BROKEN GLASS WITH YOUR
BEAR HANDS, AND CONTACT THE VENDOR IMMEDIATELY. DO NOT ALLOW
CHILDREN NEAR THE BROKEN GLASS.
CARE AND MAINTENANCE