Berlin Gardens PECC2131 Firmware update

Comfo-Back
Bar Chair
Cozi-Back
Counter Chair
Arm
Footrest
Leg
Back Slat
Seat Support
Frame
Seat Slat
Assembly Directions for
Counter and Bar Chairs
#PECC2131, #PEBC2135, #PZCC2131, #PZBC2135
HARDWARE PACKAGE
4 ¼" x 3" Allen Head Bolts
2 ¼" x 3¼" Allen Head Bolts
4 ¼" x 3½" Allen Head Bolts
2¼" x 2½" Allen Head Bolts
12 ¼" Flange Nuts
4 Acorn Nuts
1Allen Wrench
PACKAGE CONTENTS
1 Back
1 Seat
2 Arms with Legs
1 Footrest
1 Hardware Package
Firmly tap bolts into pre-drilled
holes before tightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
TOOLS NEEDED:
Hammer
" Wrench
Allen Wrench
(Included)

¼" x 3½" Allen Head Bolt
¼" x 3½" Allen Head Bolt
¼" x 3" Allen Head Bolt
¼" x 3" Allen Head Bolt
¼" x 2½" Allen Head Bolt
¼" x 3¼" Allen Head Bolt
¼" x 3¼" Allen Head Bolt
¼" x 2½" Allen Head Bolt
STEP #2 - Turn the chair on other side and repeat Step #1.
STEP #3 - Attach the Footrest to the Legs using 1/4" x 3" Allen
Head Bolts. Second, place Acorn Nut on the end of
the Bolt.
STEP #4 - Turn the chair on other side and repeat Step #3.
STEP #5 - Set the chair upright. Your chair is now complete!
Acorn Nut
STEP #1 - A. Attach the seat to the back using 1- ¼" x 3¼" Allen Head Bolt
and Flange Nuts.
B. Attach the arm assembly to the Seat and Back using
2- ¼" x 3½" and 1- ¼" x 2½" Allen Head Bolts and Flange Nuts.
A.
A.
B.
B.
B.
B.