Techni Mobili RTA-8338 User manual

MODEL RTA - 8338
Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.

RTA-8338
DIMENSIONS
MAXIMUM WEIGHT CAPACITIES
DO NOT exceed this limit
Please use care and good judgement
when placing objects on wood surface
Product Size: 44"W x 24"D x 30"H

P.3
Main Structure Back Panel Caster Stud
Side Panel Horizontal Tube Main Panel
CPU Side Panel CPU Panel CPU Tube
x4x4
x2
x2

30mm
P.4

P.5
Use Screws (A) to assemble the Side Panels (5) to
the Main Structures (1). Insert the Studs (4) to the Main Structures (1).
Use Screws (B) to assemble the Horizontal Tube (6) between the Main Structures (1).

P.6
Use Screws (C) to assemble the Back Panel (2) between the Main Structures (1).
Use Screws (D) to assemble the Main Panel (7) to the Main Structures (1).

P.7
Use Screws (D) to assemble the CPU Side Panel (8)
to the CPU Panel (9).
Use Screws (D) to assemble the CPU Tube (10)
to the CPU Side Panel (8).
Fix the Casters (3) to the CPU Panel (9).
Make sure to install the ones that
have the stop at the front.
Tighten all the screws and enjoy your unit!

English
- DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR
EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL
DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE
WARRANTY.
- DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL
TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF
A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY
TOWEL.
- PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED
BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE
REMOVED FROM THE PRODUCT.
CARE AND MAINTENANCE