Tecway Mecpower Amber Bus User manual

Amber Bus manual

1
In order to prevent any problems arising from improper operation, you
must carefully read this manual before installation and use machine, pay
attention to the items marked in this book.
Please keep this book in good condition for future reference.
Summary
 Transportation, installation, movement
 How to operate
 How to adjust
 Maintenance
 Troubleshooting
 Parts list
 Circuit diagram

2
Safety Attention
1) The machine has a high-voltage at internal part, the
adjustment must be operated by technician to avoid any
personal injury or damage caused.
2) When checking and maintaining, please cut off the power
before proceeding.
3) Please shut off the door of machine. Before opening the door,
please turn off the power switch.
4) In order to prevent abnormal accident, there must be
firefighting facilities nearby.
Install Attention
For safety and avoiding damage, do not place machine at the
following area.

3
Using attention
1) The voltage range of the machine is between 105V ~ 115V / 215V ~ 225V.
The rated working voltage is 110V / 220V. The specific working voltage is
shown on the nameplate of the machine door. The use of the machine voltage
must be correct, otherwise it will make the machine hard to repair damaged.
2) The power plug must be inserted firmly, and keep the power cord can not pull
too tight, damaged, to prevent personal injury and power supply short circuit,
leakage.
3) Please set the machine's coin and game content at first using, so that the
machine can be operated normally.
4) Check all functions when operating the machine.
Maintenance
1) Please maintain machine regularly to check each function can be operated
normally.
2) Shut down power switch when changing the parts to avoid any injury.
3) Use the same model when changing the parts to avoid any damage.
4) Check the wire connection and voltage output after changing power supply
box.
5) Working voltage of PCB is 12.1V~12.4V.
6) Before sending PCB for repair, please do leakage inspection and
internal voltage & power supply to ensure PCB is damaged or not.

4
Cleaning
1) Wipe the machine with a clean, soft cloth.
2) To avoid any damage on the surface, please do not clean the machine with
the stuff below.
 Deteriorated cleaner
 Acidic cleaner
 Pesticides, disinfectants, alcohol or other chemical products
Attention for movement or transportation
1) When moving or transporting, please pay attention on disassembly to prevent
damage to the machine.
2) During transport, please prevent impact from rubbing on machine; otherwise
it will cause serious damage to the appearance of the machine.
3) When transporting the machine, please pay attention on the methods and
protect the appearance of the machine; otherwise it will cause serious damage
to the machine.

5
CONTENT
1. GAME MACHINE INTRODUCTION ....................................................................... 6
2. HOW TO PLAY .................................................................................................. 7
3. TECHNICAL PARAMETERS............................................................................... 10
4. MOVEMENT ...................................................................................................... 12
5. INSTALLATION .............................................................................................. 13
5.1 SELECT THE AREA ............................................................................................13
5.2 HOW TO FIX.................................................................................................... 14
5.3 CHECK CONNECTION BEFORE POWER INPUT.............................................................. 14
5.4 POWER INPUT ..................................................................................................15
6. CHECK BEFORE OPERATION ........................................................................... 17
7. DAILY OPERATION......................................................................................... 17
7.1 POWER INPUT AND START TO OPERATE ..................................................................17
7.2 Check machine operation before closing .......................................... 17
7.3 COLLECT COINS AND ACCOUNT............................................................................. 17
8. GAME SETTING .............................................................................................. 18
8.1 SETTING BUTTON INSTRUCTION ...........................................................................18
8.2 HOW TO SET.................................................................................................... 19
9. ADJUSTMENT .................................................................................................. 20
9.1 COIN SELECTOR ADJUSTMENT .............................................................................. 20
9.2 VOLUME ADJUSTMENT ......................................................................................... 21
10. MAINTENANCE ................................................................................................ 22
10.1 DAILY INSPECTION .......................................................................................22
10.2 DAILY MAINTENANCE...................................................................................... 22
11. TROUBLESHOOTING ..................................................................................... 23
12. COMPONENTS EXPLODED DIAGRAM AND PARTS LIST ............................... 24
12.1 FRP COMPONENTS EXPLODED DIAGRAM AND PARTS LIST ...............................................24
12.2 COIN DOOR COMPONENTS EXPLODED DIAGRAM AND PARTS LIST ........................ 25
12.3 EYE COMPONENTS EXPLODED DIAGRAM AND PARTS LIST .................................... 25
12.4 LCD DISPLAY COMPONENTS EXPLODED DIAGRAM AND PARTS LIST.......................25
12.5 REPAIR DOOR AND PCB COMPONENTS EXPLODED DIAGRAM AND PARTS LIST ......... 27
12.6 MONITOR AND CONTROL PANEL EXPLODED DIAGRAM AND PARTS LIST ................. 28
12.7 STEELING WHEEL EXPLODED DIAGRAM AND PARTS LIST .................................... 29
12.8 BASE COMPONENTS EXPLODED DIAGRAM AND PARTS LIST .................................. 30
13. CIRCUIT DIAGRAM ...................................................................................... 31

6
1. Game machine introduction

7
2. How to play
The machine can be played for two people at the same time, but two different
roles in the game; one person controls and plays at the steering wheel, another person
controls and plays at the screen. Two roles cooperate to play the game, ideal for
parent-child play or friends. Two roles can also operate independently of each other,
each acting without disturbing each other.
Instruction of playing game：
1） Insert the coin and game will start automatically
2） How to play at the screen：
After the game starts, the screen will play a scene, the player
must first enjoy this wonderful animation. From the animated short
film, learn which member of the POLI family was dirty or injured
while performing the task. The player's job is to take care or repair
POLI members after the animation.
Control
panel of
Steering
wheel
Eyes
Coin mech
Play buttons
Monitor

8
The way to play：Take care or repair POLI member by pressing the
four buttons corresponding to the screen；press different button
at different step.
During the game, there are two tips shown at the same time to
let player know which button should be pressed to complete the task.
One of tips is on the monitor：
At the bottom of the screen, there are four tip boxes, they correspond
Injure level
Tip box
Left coin
Time countdown
Total progress
bar
Process
progressing bar
Total time
countdown

9
to the four game buttons on the machine, when a tip box on the screen
appears pointing to a game button icon then the player presses the
corresponding game button.
The second tip is the game's own tip on the buttons, when a game button
lights up, you need to press the light button.
Whether care or repair POLI member, player needs to complete the
process within the required time (total time) according to step by step.
Each process is divided into some steps and player needs to complete
all steps within required time (process time). After the end of process
time, the game will go to the next process whether player complete all
the steps. If player can complete all steps in required time, the screen
will show “Care or repair is done, you are awesome”. If player does
not complete one of the steps, the screen will show “The process is
not complete, keep to go on”.
3） Operation of steering wheel: When game starts, the oil pointer and
the speed pointer on meter will swing automatically; eye parts will
move up automatically; player can turn the steering wheel with the
swing of machine to experience the feeling of driving car. In addition,
there is a horn button, press it to have a whistle sound for increasing
the fun of driving; there are four buttons at the left side of control
panel, pressing the button to play the POLI family theme song; press
the microphone to play ambulance siren sound; press the door button
to make the sound of opening/closing the door; press the wiper button
to make the sound of wiper. In the process of playing, player can make
the imagination to image the different scenarios appear when driving
car.
Horn
Steering
wheel
meter
Wiper button
Car door button
Microphon button
Music button

10
3. Technical parameters
Using voltage：AC220V/110V（50/60HZ）
Max currency：0.5A/1.5A
（Remark：Actual using voltage and currency are depends on the
nameplate on machine.）
Maximum power：300W
Standby power：60W
Token diameter：φ21mm ~ φ30mm
Token thickness：1.2mm ~ 2.5mm
Capacity of coin box：φ25mm*1.5mm around 1400pcs token
Environment ： room temp. -5 ~ 40 °C, ambient humidity ＞
90%,non-corrosive liquid contacts directly, no excessive oil mist,
dust
Dimension ：L1680mm*W1120mm*H1710mm
1710
1680
1120

11
Spare parts：
No. Photo Name Spec/Model No. Qty
1 Bayonet LED White 1
2 Fuse 5A（small） 2
3 Key 1285＃ 2
4 Key 1396＃ 2
5 Power cord 1
6 Manuel 1
OPERATION MANUAL

12
4. Movement
1) First, loose the nut of foundation to rise up and touch the nut at machine’s
bottom
2) Unplug the power cord from power supply box.
3) Can push machine from the front or back side.
Remark：If the floor is not flat or has a tilt to it when moving machine,
please pay attention to the force and prevent the crash of handling to the
machine.
Attention:
* Turn off the power switch and unplug the power cord.
* Random human movement, flip and transportation will damage the
equipment.
* Prevent the crash of handling the movement, or that will cause the damage
on appearance and construction on machine.
Wheel
Foundation
出力方向2
出力方向1
注意：不能两个方向同时用力，只允许选择某一方向操作

13
5. Installation
Please follow the steps of installation at the first time.
5.1 Select the area
1) Place the machine with the same type of others according to its play
classification and appearance.
2) Please refer to the suggested position and dimension below to place machine.
Make an enough space for daily normal operation and ensure customers can
play comfortably.
Attention：Machine has to be placed on flat ground.
0.5m
0.5m
0.5m
0.5m
1.68m
2.68m
1.12m
2.12m

14
5.2 How to fix
5.3 Check connection before power input
1) Check the internal structure of the machine for any looseness caused by
transportation. The wire connector terminals should not fall out of the port.
2) Check the ground wire is connected to the ground.
3) Check the machine's power input at both ends of the impedance to the ground
should be greater than 100 megohm.
4) Adjust coin mech to make tokens work properly.
5) Connect the power cord.
Wheel
Foundation
5
mm
市电插盒
电源输入插头

15
Attention
A Do not put heavy stuff on the power cable. That could cause
a short circuit, even a fire. The wire cannot be forced to
stretch and bend. Do not expose the wire to near the stuff
with high temp. Do not put wire where to be kicked or touched
easily.
B When unplugging the power cable from the socket, please pull
out by holding the plug, do not hold the wire.
Do not pull the plug with wet hands.
AAAA
！ Warning
Check the impedance of the ground to power supply input
before inputing the power to machine.And, check the way of
connection.

16
5.4 Power input
1) Ensure machine’s input voltage is same as the nameplate.
2) Turn on the power switch after inputting the power.
3) Insert the sample token into the coin acceptor, put the coin into the coin
acceptor and confirm that inserting coin is normal.
4) Check all LED display and lights are ok.
5) Set the game setting including coin qty, play time.
6) Insert the coin and start to play game to ensure the buttons, turning
steering wheel and swinging of machine work properly.
7) Ensure the sound is ok.

17
6. Check before operation
To ensure the machine can work properly and safety concern, it is
necessary to do daily inspection before the operation.
Check the items below：
1) Power input wiring is fixed well and no damage.
2) Ensure machine is fixed well.
3) Confirm there’s no damage on the appearance.
4) Ensure there’s no stain on machine and labels are fixed well.
7. Daily operation
7.1 Power input and start to operate
1) Turn on the power switch.
2) Inspect the LED display by visual checking.
3) Check background music works properly.
4) Check coin selector, buttons, and the swinging of machine
work properly.
7.2 Check machine at the end of operation
1）Check the monitor can work properly.
2）Check again for inserting coins, buttons and swinging of
machine, if there is any problem, check the troubleshooting
list.
7.3 Collect coins and account
1) Open the coin box and collect coins after turning off machine.
2) Open the door to check the number of coin code tables.

18
8. Game setting
8.1 Setting button instruction
TEST/set button：Enter game setting menu/switch the item
ENTER/OK button：Increase/decrease the value
SERVE/free button：Free play
Setting
board
Select button
OK button
Setting board
SW1
TEST
SERVE
SELECT
ENTER
ERASE
Set button
Free
button

19
8.2 How to set
Press “TEST” on setting board to enter setting menu; select
the item by pressing “TEST” again, and change the change the
item by pressing “ENTER”
8.3 Setting instruction
Setting menu
Instruction
1）Language：Set the language on monitor.
2）Game Time：Set the time for playing a game. If set “60”, game
time is 60 seconds.
3）Coin：Set the coin qty to play a game. If set “1”, that means
play a game by inserting 1 coin.
4）Free Play：If set“OFF”，machine cannot be played free.
5）Demo music： If set “ON”, machine would play music under
standby.
6）Volume：If set 50%，the volume is 50% of max value.
7）Reset：All game parameters are restored to the factory setting.
8）Save and exit：Save the game settings and exit the menu.
Demo Music ON
Reset YES
Save/Exit YES
Volume 50%Game Time 60
Free Play OFF
Coin 1
Language Chinese
Settings