Tecway Rainbow User manual

RAINBOW
Product Manual
V1.0

《RAINBOW》Product Manual V1.0
1
Contents
1. Machine instructions...................................................................................2
2. Machine setting & test instructions.................................................... 7
3. Fault & Resolution.....................................................................................15
4. Machine maintenance...................................................................................19

《RAINBOW》Product Manual V1.0
2
1. Machine instructions
1.1.Specification and Parameter
1.Voltage：AC220V 50Hz（Please refer to the machine nameplate for specific use voltage）
2.Dimension：W1100×D1620×H2245mm（Assembly）
3.Weight：about 200 Kg
4.Power：450W
1.2.Considerations
1.Suitable for indoor environment
2.Please do not placed in the tilted position, so as to avoid accidents
3.Please do not use it in the following places：
In the dusty environment；
In the high temperature or airiness environment ；
A condensing place that causes a machine to produce condensed water or humidity.；
Near hot objects ；
Dangerous object ；
Strong magnetic interference ；
Near devices that are prone to spark;；
Voltage instability or voltage is too low ；
Vibration serious place ；
4.The machine must be assembled and fixed in accordance with assembly instructions before
normal operation
5.Before moving, must turn off the power and unplug the power cord
6.If the caster can not move when moving, the machine's foot seat is put away, please confirm
whether the bottom surface is flat
7.Random human movement, flip, transport, etc. can damage equipment, damage machine
performance
8.Confirm in the process of moving, overturning, transporting and so on to meet the
requirements of the manufacturers
1.3.Installation notes
1.3.1. Unpack the packing material of each part of the machine
Host
Coin box
Lottery box
Wind turbine
Steps
Accessories bag

《RAINBOW》Product Manual V1.0
3
1.3.2. Install the wind turbine component to the host as shown below
Wind turbine components
need to be plugged into the
slots on both sides of the
bottom of the host.
1、The wind turbine assembly is
mounted at the bottom of the host
2、The connection between the
Lookout unit and the host is connected.
After the need to put the
wire on the host, to
prevent falling.
3, with two m4x8 screws to lock the
flap to the mainframe, fixed wind units.
M4x8; 2pcs

《RAINBOW》Product Manual V1.0
4
1.3.3. Move the host to a suitable position, then unscrew the 6 feet of the machine, adjust the
height of the foot, ensure that all casters are off the ground and the force of each foot is close.
1.3.4. Install the wind turbine components to the host as shown in the following figure
Both sides need
locking screws
m4x8; 6pcs
Adjust the coin box
and the seat of the
lottery box, so that
the box is highly
suitable and stable.
The Coin box, lottery
box, LED, ground air
connectors are
connected, received
in the slot
Lock screws
m4x8;5pcs
Load the plastic
parts of the step
assembly onto the
step machine. Be
careful not to press
the wire.
Lock screws
m4x8;4pcs

《RAINBOW》Product Manual V1.0
5
1.4.Playing way
1、 Insert coin, enter the waiting state
2、Open the elastic curtain and carefully enter the machine
3、Press the "Start" button and start the game (after 30 seconds, no one presses the button,
the game will also automatically enter the game)
4、the top of the landing goal automatically open, the ball house will be all the balls fall
down. At the same time, the bottom of the recycling ball also began to reclaim the balls.
( goal where ball drop from will be closed in pre-set time)
5、players put the ball into the ball entrance, the machine will be judged to enter the ball
is big or small ball, and then according to the score set the cumulative score, displayed
on the display screen.
6、Game over when time finish, then the goal will not be graded.
7、according to the final score, combined with the Advance lottery score set, the lottery
will spit out the corresponding number of lottery tickets.
8、The machine will continue to reclaim the inside ball (if set) and then return to standby.
1.5.Color Ball Request
1、Please use the original factory color ball.If other colored balls are used,
the diameter of the ball should be between 79mm and 81mm.The diameter of the ball
is between 69mm and 71mm.The weight of the ball is between 6.5g and 7.5 g.The weight
of the ball is between 4g-6g
2、The number of balls placed inside the machine game needs to match the game time
and the ball time.
3、It is assumed that the recommended amount of payback time and the number of
Entrance
Coin port
Elasti
c
Ball house
lottery
Display screen
Start button
ball entrance
Recycling ball
Out the goal

《RAINBOW》Product Manual V1.0
6
balls is as follows: "Payback time = game time-drop time"：
ball
100pieces
200pieces
300pieces
400pieces
500pieces
Time
30s
50s
70s
90s
110s
*This recommended data is the player in the ordinary pitching speed measurement,
please follow the actual situation increase and decrease the number of balls
1.6.Game considerations
1、This game is only suitable for children standing at 80-130 cm
2、Children need to be accompanied by adults to play games.
3、Don't let the child get into the back of the recycling ball. Don't put your
hand into the goal
4、It can not enter 3 or more people at the same time, in case of accident.
5、Children feel uncomfortable and need to stop the game.
1.7.Machine Movement considerations
1、Be sure to pick up each foot and move it
2、After the uneven ground movement, the Wind turbine component must be removed before
moving.
3、The individual components must be packed and transported for long distances
4、Long distance transport needs to be in the bottom of the department of EPE and other
Shockproof materials (as shown in the figure below).
5、If the machine moving in the process of encountering the door is not high enough, you can
remove the top of the ball warehouse and then move (as shown in the figure below).
Up
Pull back and lift
Untie 6pcs buckles
Note Wired Group connectors

《RAINBOW》Product Manual V1.0
7
2. Machine setting & test instructions
2.1.Dialing switch setting
The dialing switches on the machine board are shown in the following illustration:
SW1：
detail
project
Currency per
Fall ball time
(In a game, when the
goal remains open)
Game time
(Total game time)
1
2
3
4
5
6
7
8
Wireless free
OFF
OFF
OFF
1coin/time
ON
OFF
OFF
2coin/time
OFF
ON
OFF
3coin/time
ON
ON
OFF
4coin/time
OFF
OFF
ON
5coin/time
ON
OFF
ON
6coin/time
OFF
ON
ON
7coin/time
ON
ON
ON
0s
OFF
OFF
10s
ON
OFF
20s
OFF
ON
30s
ON
ON
60s
OFF
OFF
OFF
70s
ON
OFF
OFF
80s
OFF
ON
OFF
90s
ON
ON
OFF
100s
OFF
OFF
ON
120s
ON
OFF
ON
150s
OFF
ON
ON
180s
ON
ON
ON
Factory defaults
ON
OFF
OFF
OFF
ON
OFF
OFF
ON

《RAINBOW》Product Manual V1.0
8
SW2：
detail
project
Small ball score
内
容
item
Big ball score
1
2
3
4
5
6
7
8
1Score/ball
OF
OFF
OFF
OFF
1Score/ball
OFF
OFF
OFF
OFF
2Score/ball
ON
OFF
OFF
OFF
2Score/ball
ON
OFF
OFF
OFF
3Score/ball
OF
ON
OFF
OFF
3Score/ball
OFF
ON
OFF
OFF
4Score/ball
ON
ON
OFF
OFF
4Score/ball
ON
ON
OFF
OFF
5Score/ball
OF
OFF
ON
OFF
5Score/ball
OFF
OFF
ON
OFF
6Score/ball
ON
OFF
ON
OFF
6Score/ball
ON
OFF
ON
OFF
7Score/ball
OF
ON
ON
OFF
7Score/ball
OFF
ON
ON
OFF
8Score/ball
ON
ON
ON
OFF
8Score/ball
ON
ON
ON
OFF
9Score/ball
OF
OFF
OFF
ON
9Score/ball
OFF
OFF
OFF
ON
10Score/ball
ON
OFF
OFF
ON
10Score/ball
ON
OFF
OFF
ON
15Score/ball
OF
ON
OFF
ON
15Score/ball
OFF
ON
OFF
ON
20Score/ball
ON
ON
OFF
ON
20Score/ball
ON
ON
OFF
ON
25Score/ball
OF
OFF
ON
ON
25Score/ball
OFF
OFF
ON
ON
30Score/ball
ON
OFF
ON
ON
30Score/ball
ON
OFF
ON
ON
35Score/ball
OF
ON
ON
ON
35Score/ball
OFF
ON
ON
ON
40Score/ball
ON
ON
ON
ON
40Score/ball
ON
ON
ON
ON
Factory
setting
OFF
OFF
OFF
OFF
Factory
setting
ON
OFF
OFF
OFF

《RAINBOW》Product Manual V1.0
9
SW3：
detail
project
Score per ticket
Save
Stand
by
Clean
ball
1
2
3
4
5
6
7
8
No Ticket
OFF
OFF
OFF
1Score/Ticket
ON
OFF
OFF
2Score/Ticket
OFF
ON
OFF
3Score/Ticket
ON
ON
OFF
5Score/Ticket
OFF
OFF
ON
10Score/Ticket
ON
OFF
ON
20Score/Ticket
OFF
ON
ON
30Score/Ticket
ON
ON
ON
Not save coin 、votes
OFF
Save coin 、votes
ON
No standby Sound,
demo
OFF
standby Sound, demo
ON
Don't clean the ball
after the end
OFF
Clear the ball after
the end
ON
Factory setting
OFF
OFF
OFF
ON
ON
ON
OFF
OFF

《RAINBOW》Product Manual V1.0
10
2.2.Test instructions
Setting Panel Description
up(test) ：Click in the standby state to enter the test program; Press the flip page in the test
program
down(serve) ：On standby, click the free game once; Click on the next page in the test
program
Enter ：Tap in the test program to select or determine
2.2.1. Bottom Department Test
After entering the bottom department test, as shown in the right picture
1）Press "OK" key, the screen <OFF> becomes <ON>, the bottom department
starts continuously opens and closes; Press OK again, and the bottom department
stops.
2）In the process of opening and closing the bottom department:
When the bottom department is open, open (open) becomes on to indicate that
the "open check" micro switch is normal
3）When the bottom department is closed, close (off) turns on to indicate that
the "off check" micro switch is normal
2.2.2. Top Department Test
After you go to the top department test, as shown in the picture on the
right.
1）Press "OK" key, the screen <OFF> becomes <ON>, the top department begins
to rotate clockwise, press "OK" again, top department stops; When testing again,
the top department rotates counterclockwise.
2）during the top department rotation (open and close):
3）When the top department is closed, close (off) becomes ON to indicate that the
"off check" sensor is normal.
4）When the When department is closed, close (off) becomes on to indicate that
the "off check" sensor is normal.
Up(test)
Down(serve)
Enter
Volume
Coin count 1
Coin count 2
Lottery count

《RAINBOW》Product Manual V1.0
11
Wind turbine test
After entering the wind turbine test, as shown in the right picture.
1）Press "OK" key, the screen <OFF> becomes <ON>, the bottom Wind turbine
starts to work, presses "OK" again, the Wind turbine stops working。
2）when is no ball in the recovery ball, the "on" screen "SEN1" does not
show "on"; when the ball is in the recycling ball, as in the right, the "SEN1"
on the screen displays "on".
2.2.3. screen test
After enter the screen test, as shown in the image on the right.
Press the “OK”key,the screen will alternately display red and green
lines moving from top to bottom.
Observe whether the line is continuous, the color is normal, so as to
determine whether the lattice screen is normal
2.2.4. Three-color LED light test
After entering the three-color LED light test, as shown in the right
picture
Press the “OK” button to display the screen alternately:
R：ON ---- light red
G：ON ----light green；
B：ON ----light blue
M：ON ----light white
Three-color LED
Mouth throw
LED

《RAINBOW》Product Manual V1.0
12
2.2.5. Coin Counter 1 Test
After entering the coin counter 1 test, as show in the right image
Press the "OK" key, the screen will display "Ccnt1:on" 0.5 seconds after the
disappearance, while the coin counter 1 count plus 1.
2.2.6. Coin Counter 2 Test
After entering the coin Counter 2 test, as shown in the right image.
Press the "OK" key, the screen will display "Ccnt2:on" 0.5 seconds after the
disappearance, while the coin counter 2 count plus 1.
2.2.7. Lottery Counter Test
After entering the lottery counter test, as shown in the right image
Press the OK button, the screen will display "Tcnt:on" 0.5 seconds to
disappear, while the lottery counter count plus 1.
2.2.8. Lottery test
After entering the lottery test, as shown in the picture on the right.
Each time the "OK" key is pressed, the lottery will output 1 lottery
tickets.
If the lottery box is not placed in the lottery, and the test, you should
be at the end of the test to restore the factory settings to clear the lottery data, or exit the test program
will report the lack of lottery errors.
2.2.9. Start button Light Test
Enter the Start button lamp after testing, as shown in the right picture
Press the “OK”key, the screen will display <ON>, start the button light
on, press the "OK" button again, and the light is off.
2.2.10. Sound Testing
After enter the sound test, as shown in the image on the right.
Press the “OK”key, the screen displays the sound segment number and
starts playing the segment sound.

《RAINBOW》Product Manual V1.0
13
2.2.11. Browse all input signal states
Enter all input signal states as shown in the image on the right.
Each letter represents an input signal, by manually touching a signal's
switch or sensor, to observe whether the corresponding letter on the screen
changes, you can check whether the switch or sensor work is normal.
The corresponding signal name for each letter is shown in the following table:
A
Coin Converter 1 Signal
I
Lower door Clearance Check
switch
Q
OK button
B
Coin Converter 2 Signal
J
Detection of optical eye by
ball recovery port
R
*
C
Ticket Repair button
K
*
S
*
D
Ticket Machine Feedback
Signal
L
Goal scoring a light eye
T
*
E
Start button
M
Goal Scoring B1 Light eye
U
*
F
Door off Detection sensor
(NH)
N
Goal Scoring B2 Light eye
V
*
G
Door opening detection
sensor (NH)
O
up(test) button
W
*
H
Lower door open detection
switch
P
down (Service) button
X
*
2.2.12. Browse Dialing Switch Status
Enter the browse code switch state as shown in the image on the right.
Each English letter represents the status of a dialing code. Compare
the status of the actual dialing switch with the corresponding letter state
on the screen to check whether the dialing switch is normal.
Red represents OFF, and green is ON
A-H represents the 1-8 digits of the SW1, the i-p represents SW2 1-8 bits, and the q-x represents SW3 1-8
digits.

《RAINBOW》Product Manual V1.0
14
The bottom door stays open for hours
The bottom door holding time is the time at which the gate of the bottom
ball recovery port remains in the "open" state during the game, and the unit
is seconds. This increase will speed up the recovery of the ball and also increase
the burden of recycling the fairway.
Enter the bottom door to keep the time set, as shown in the right picture
Press the "OK" button, when the "symbol" on the screen can be modified, press the "Up" or "down" button to
increase or decrease the value, and then press the "OK" button to determine.
2.2.13. Bottom Closing Time
The bottom door holding time is the time at which the gate of the bottom
ball recovery port remains in the "off" state during the game and the unit is
seconds. This decrease will speed up the recovery of the ball and also increase
the burden of recycling the fairway. (The game, the program will also be based
on the player pitching speed appropriate increase the time value, to ensure
the smooth recovery of the fairway) to enter the bottom of the door to maintain the time settings, as shown in
the right image.
Press the "OK" button, when the "symbol" on the screen 《》, press the "Up" or "down" button to increase or decrease
the value, and then press the "OK" button to determine.
2.2.14. Restore factory setting
Enter the Restore factory settings option, as shown in the figure on the
right.
press the “OK” button, you will restore the bottom door retention time,
bottom closing time, and clear all saved coins, votes, and highest scores. After
you restore the factory settings, the screen displays “OK”.。
2.2.15. View Software versions
After you go to view the software version options, as shown in the figure
on the right. You can view the current machine software version.
2.2.16. Save and exit
After enter save and exit options, as shown in the right image
Press the “OK” button to save the current settings and exit back to
standby.

《RAINBOW》Product Manual V1.0
15
3. Fault & Resolution
3.1.Fault code description and fault handling
Fault code
Fault Name
Fault Analysis and treatment
Error 1
Software version
update
The prompt version has been updated. Reboot to remove the alarm
Error 2
Data error
Internal data error. 1, restore the factory settings; 2. Replace
the motherboard.
Error 3
Slot 1 failure
1, check the coin 1 whether there is a card currency, if there
is a check out; 2, checking the SW1 switch of the slot 1 is in
NC. Status, and if so, dial No. State, 3, replace slot 1.
Error 4
Slot 2 failure
1, check the coin 2 whether there is a card currency, if there
is a check out; 2, checking the SW1 switch of the slot 2 is in
NC. Status, and if so, dial No. State, 3, replace slot 2.
TICKET
IS EMPTY
(Error 5)
Lottery is empty
The lottery has been finished, waiting to be added. The
"surp :xxx" on the screen indicates the number of tickets left.
1, add lottery tickets, and press the "repair" button next to
the lottery machine, the remaining lottery can be output. 2,
Joben machine set the lottery, then restore the factory settings
can be lifted alarm.
Error 6
Bottom department
"open" check error
check the bottom of the department whether there is foreign body
jammed, 2, into the "bottom of the test procedures", check the
bottom of the Department of Motor is normal work. If the motor
does not turn, change the motor, if there is no "open" signal,
adjust the lock micro-switch, or change the micro-switch.
Error 7
Bottom department
"off" check error
1, check the bottom of the department whether there is foreign
body jammed, 2, into the "bottom of the test procedures", check
the bottom of the Department of Motor is normal work. If the motor
does not turn, change the motor, if there is no "off" signal,
adjust the lock micro-switch, or change the micro-switch.
Error 8
Top department
"open" check error
1, check the top department whether there is foreign body jammed,
2, check the belt and coupling is loose, 3, into the "top
department test procedures", check the top department motor is
normal work. If the motor does not turn, change the motor, and
if there is no "open" signal, adjust the gap between the sensor
and the door, or replace the sensor.
Error 9
Top department "off"
check error
When this error occurs during the game, the machine pauses the
game and tries to repair it automatically, and then continues
the game. If the machine can not be repaired automatically will

《RAINBOW》Product Manual V1.0
16
need to be treated as follows: 1, check the top of the department
whether there is foreign body jammed, 2, check the belt and
coupling is loose, 3, into the "top Department test procedure",
check the top department motor is normal work. If the motor does
not turn, change the motor; if there is no "off" signal, adjust
the clearance between the "off" sensor and the door, or replace
the sensor
Error 10
Pitch Card Ball
1, check whether the ball pipe has foreign body stuck, if there
is removed; 2, emptying the pitch pipe, enter the "Browse all
input" test procedure, check L, M, n items have been shown green
items, if the need to replace the corresponding light eye.
3.2.Other fault analysis and treatment
1、Frequent card ball, the wind can't blow the ball into the silo
A、Check the weight of the ball is over 8g, if there is more than change the color ball
B、Check if the site's voltage is too low
C、check the wind turbine and outlet whether there is debris blocked, if there is clean.
D、Check if dust is accumulated inside the blower and clean up if any.
2、Every time the game is over, the wind turbine have been working for a while.
A、check the game after the end of the ball recovery is still a ball stay, if there is
a proper reduction in the number of balls or increase the game time.
B 、The ball recovery port detects whether the light eye has debris or dust shielding,
if any, clean.
3、Dot-matrix screen flower screen, irregular flicker
A、check the line group is loose
B、 Replace the dot matrix screen
3.3.Machine structure diagram
3.3.1. Dot Matrix Screen Component:
Dot Matrix Screen Unit board
Dot Screen Panel Acrylic

《RAINBOW》Product Manual V1.0
17
3.3.2. Top Department components：
3.3.3. Bottom Department Components：
Transmission Belt
Coupling
Top Department Motor
Transmission Belt
"Open" sensor
"Off" sensor
Inductive film (on
Revolving door)
Revolving door
Revolving door
Light LED
Transmission Crank
"open" micro switch
Bottom Department
Motor
"Off" micro switch

《RAINBOW》Product Manual V1.0
18
3.3.4. Power components:
3.3.5. Back dis-assembly process:
Fuse
Filter
compo
nents
Solid State Relays
Power switch
Main
power
Supply Box
Power adapter
(for lighting LED
lights)

《RAINBOW》Product Manual V1.0
19
4. Machine maintenance
Even if the machine works properly, in order to allow the machine to operate at its best, and for a longer
period of time, check and maintain the following daily:
1、Check if the foot seat is normal to support the good machine.
2、Check whether the wind turbine is loose, whether the air inlet has debris accumulation
3、Regular cleaning fan blade dust
4、check whether the ball warehouse lock buckle loose.
5、Check if the screws in the parts of the fixing are loose
6、Check whether the connectors are loose and whether the terminals are off.
Maintenance Precautions:
1、For maintenance, please cut off the power supply to prevent the occurrence of workers or other people
injured, electric shocks and so on.
2、Do not mention the operation of this manual, please be sure to consult the company's after-sales service
center, in accordance with the instructions, answer the operation.
3、Consumables and Repair parts please use the company's designated products
4、even if the main power supply, power panels and monitors inside or at high temperature and high
pressure state, if encounter there will be burns, electric shock risk. Please be careful not to touch.