Teknion district 120 Hub HA Worksurface with Connection Kit for hiSpace Quick Connect with District Spine... User manual

120 Hub HA Worksurface with Connection Kit for hiSpace Quick Connect with District Spine (WBT),
hiSpace Quick Connect HA 120 Table Mechanism for District Power Spine (YST)
Section:
Description: Page No:
Date:
Rev. No: 01
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
Sept 2022 1 of 18
DIS_758
district Installation Guides
A
B2
G3
G4
B1
B6
C
B5
D
B3
B4

Part and Product Identification
Section:
Description: Page No:
Date:
Rev. No: 0
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
Sept 2022 2 of 18
DIS_758
district Installation Guides
A - 120 Hub HA Worksurface
with Connection Kit for hiSpace
(WBT) x1
B - hiSpace Quick Connect 120 Table
Mechanism for District Power Spine
(YST) x1
B1 - KAIDI QI BIFMA
Range Leg
(N09-9282) x3
B2 - Leg Mount Bracket
QI hiSpace
(N09-9873) x2
B3 - Leg Mount Bracket Short
QI hiSpace
(N09-4900) x1
B4 - Stiffener
(A16-11207)x2
B5 - Cam Handle hiSpace2
(N09-9814) x3
B7 - Control Box for 3 Leg
BIFMA System with Anti-Collision
(N09-9457) x1
B8 - 3M US/Canada Power Cord
(D06-4136) x1
B9 - hiSpace Motor Cable
(N09-9455\10) x Q'ty varies
(N09-9455\25) x Q'ty varies
B10 - Keypad, hiSpace Table
(D06-4276) x1 OR Kaidi
hiSpace Toggle Switch
(N01-7336)x1
D - Large Cable Organize With Felt Cover
(N09-8069S) x1
B11 - #10 x 0.875" LG Screw
(E07-0077) x Q'ty varies
D1 - Wire Manager Mounting
Bracket
(A16-6737) x 1
D2 - Wire Manger Cover
(B07-0239) x 1
D3 - M5x20 Philips Screw
(E07-0203) x 4
E - Complements Dual Plastic Cable Management Tray
(YEYS02) x1
E1 - Wire Manager
(PB02-E179) x2
E2 - #12x3/4 Wood Screw
(FS12-3-4-QPA) x6
F - hiSpace Hardware Kit Base 120 Power Spine
(X01-4158) x1
F3 - #6 x 5/8" Quad WD Screw.
(E04-0090) x 10
F1 - M5x0.8, 12mm
Philips Screw
(E01-1106) x2
F5 - #8x1" Wood Screw
(E04-0061) x 2
G - Vertical Wire Carrier - hiSpace Workstation YEEE08
(N01-5144\16\34) x1
G1 - Vertical Wire Carrier Worksurface Connector
(B02-0844) x1
G2 - Vertical Wire Carrier Leg Connector
(B02-0844) x1
G3 - Vertical Wire Carrier
Assembly
(N01-6034-34) x1
F6 - M6x16, SHCS
(E04-0096) x 12
F2- (KAIDI) WOOD SCREW
3.5 X 19mm, x 2 or 3
F4 - Cable Clamp 3/8, BLK
(B02-0558) x 10
G4 - Vertical Cover & Pad
Assembly
(N09-8474-16) x1
G5 - #12x7/8" WD Screw
(E04-0087) x2
G6 - Cable Tie
(B02-0545) x1
B6 - Foot 6", hiSpace
(N09-9458X) x1
YS Feet (Pair), hiSpace Table
(N09-5784\24) x1
C - Foot Assembly, hiSpace Table
(N09-5790\24) x2
OR

STEP 2: Attach the Reinforcement Bars to Worksurface as shown and secure with provided
screws.
STEP 1: Attach Leg Mount Brackets to the Worksurface as shown using provided screws.
Section:
Description: Page No:
Date:
ATTACH BRACKETS TO WORKSURFACE ATTACH REINFORCEMENT BARS
DIS_758
3 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
B11
B2
B2
B3
A
NOTE: Worksurface upside down
NOTE: Do not over tighten
B4
B11
NOTE: Do not over tighten

STEP 4: Push Legs towards the outer side of the Worksurface.STEP 3: Attach Legs to Brackets by lining up with holes as shown.
Section:
Description: Page No:
Date:
ATTACH LEGS TO BRACKETS SECURE LEGS TO BRACKET - 1
DIS_758
4 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
B1

STEP 6: Insert Pin as shown to lock Cam Handle.STEP 5: Install the Cam Handles into the Brackets turning towards Leg to lock
Section:
Description: Page No:
Date:
SECURE LEGS TO BRACKET - 2 SECURE LEGS TO BRACKET - 3
DIS_758
5 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
B5

Section:
Description: Page No:
Date:
ATTACH FEET TO LEGS
Sept 2022 6 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 7: Attach feet to legs using provided screws as shown.
C
B6 F6

STEP 9: Attach Mounting Bracket to Worksurface using provided screws.STEP 8: Disassemble Felt Cover as shown.
Section:
Description: Page No:
Date:
DISASSEMBLE FELT COVER ATTACH MOUNTING BRACKET
DIS_758
7 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
NOTE: Do not over tighten
NOTE: Only necessary if Cable Organizer
with Felt Cover specified.
NOTE: Only necessary if Cable Organizer
with Felt Cover specified.
D2
D1
D3

Section:
Description: Page No:
Date:
ATTACH AND SECURE CONTROL BOX
Sept 2022 8 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 10a: Attach the Control Box to the Mounting Bracket using provided screws and secure with straps.
NOTE: Do not over tighten
B7
F1
NOTE: Only necessary if Cable Organizer
with Felt Cover specified.

Section:
Description: Page No:
Date:
ATTACH CONTROL BOX
Sept 2022 9 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 10b: If there is no Felt Cover Specified, secure Control Box directly to Worksurface as shown.
NOTE: Do not over tighten
B7 F1
NOTE: If Cable Organizer with Felt Cover
is not specified.

Section:
Description: Page No:
Date:
ATTACH SWITCH AND CONNECT WIRES
Sept 2022 10 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 11: Attach Keypad (instructions are the same for both keypads) to Worksurface and connect to Control Box using attached cable. Attach each leg to the Control Box using Motor Cables.
Attach Power Cord to Control Box. Ensure that the switch cable has slack and does not affect the toggle movement.
B9
B7
F2
B10
NOTE: Do not over tighten
B9
B1
B8
B10
NOTE: For More information on
Setting up either Switch please refer
to DIS_001 or DIS_002.

STEP 13: Rotate Screw Locks to secure cover.STEP 12: Attach Felt Cover to Wire Management Mounting Bracket
Section:
Description: Page No:
Date:
REASSEMBLE FELT COVER SECURE FELT COVER
DIS_758
11 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
D2
NOTE: Only necessary if Cable Organizer
with Felt Cover specified.
NOTE: Only necessary if Cable Organizer
with Felt Cover specified.

STEP (Optional): Place Loose wire inside Tray.STEP (OPTIONAL): Attach the Management Tray to the Worksurface using provided screws.
Location to be decided by the User.
Section:
Description: Page No:
Date:
ATTACH WIRE MANAGEMENT TRAY (OPTIONAL) TIDY LOOSE WIRE (OPTIONAL)
DIS_758
12 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
NOTE: Only necessary if Cable Management
Tray is specified
NOTE: The location of the Wire
Management Tray is to be decided by the
User according to their need.
E1 E2
NOTE: Do not over tighten.

Section:
Description: Page No:
Date:
SECURE LOOSE WIRE
Sept 2022 13 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 14: Secure loose wires to the Worksurface using Cable Clamps.
F4
F3

Section:
Description: Page No:
Date:
FLIP OVER TABLE
Sept 2022 14 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 15: Flip over the Table.
NOTE: Please make sure to have at least two
people for this step.

STEP 17: Insert Cable into the Wire Carrier as shown.STEP 16: Attach Worksurface Connector and Leg Connector to the Vertical Wire Carrier
Assembly as shown.
Section:
Description: Page No:
Date:
ASSEMBLE VERTICAL WIRE CARRIER INSERT CABLE INTO WIRE CARRIER
DIS_758
15 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
NOTE: Only necessary if
Vertical Wire Carrier specified.
G1
G2
G3
Cable

STEP 19: Feed Cable into the Vertical Cover & Pad Assembly before attaching the Wire Carrier
as shown and snapping in place.
STEP 18: Secure cable to Wire Carrier using Cable Tie.
Section:
Description: Page No:
Date:
SECURE CABLE ATTACH TO COVER ASSEMBLY
DIS_758
16 of 18
Sept 2022
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
G6
G4

Section:
Description: Page No:
Date:
ATTACH TO LEG
Sept 2022 17 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 20: Attach Cover to Leg Post of Table as shown.
NOTE: Cable hidden for illustration purposes. NOTE: Cable hidden for illustration purposes.

Section:
Description: Page No:
Date:
ATTACH TO WORKSURFACE
Sept 2022 18 of 18
DIS_758
120 HA TABLE - QUICK CONNECT
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 21: Secure Wire Carrier to underside of Worksurface using provided screws.
NOTE: Cable hidden for illustration purposes.
NOTE: Do not overtighten.
G5