fantastic furniture Yarra Bedside With USB HUB User manual

Version 1.0
Yarra
Bedside With USB HUB
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love！
Recommended weight capacity : 40kgs on top.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2):
Left Side Panel (P3);
Right Side Panel (P4);
Rail (P5);
Rail (P6);
Rail (P7);
Back Panel (P8);
Top Panel (P9);
4 x Legs (P10);
Drawer Front (P11);
Left Drawer Side (P12);
Right Drawer Sides (P13);
Drawer Back (P14);
Drawer Base (P15);
Hardware pack
Left Drawer
Side (P12)
Right Drawer
Side (P13)
Drawer Back
(P14)
Drawer
Base (P15)
Drawer
Front (P11)
Top Panel
(P1)
Top Panel
(P9)
Bottom Panel
(P2)
Right Side
Panel
(P4)
Left Side
Panel (P3)
Leg (P10)
Back Panel
(P8)
Rail
(P5) Rail
(P6)
Rail
(P7)
14 x Cam
Bolts
(H3)
14 x Cam
Nuts
(H4)
14 x Dowels
(H1)
16 x Small
Screws
(H5)
1 x CL Runner
Track
(H6)
1 x CR Runner
Track
(H7)
1 x DR Runner
(H9)
8 x Bolt
(H11)
4 x Bracket
(H10)
1 x DL Runner
(H8)
8 x Medium
Screws
(H2)
1 x USB
Connector
(H14)
16 x Screws
(H15)
1 x Allen Key
(H16)
4 x Screws
(H17)
2 x Hinges
(H18)
4 x Wedges
(H12)
4 x Wedge
Screws
(H13)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
x 4

4 x Small
Screws (H5)
(P4)
(P4)
(P3)
(P3)
You will need
Step 1
H7
CR
H5
Step 2
You will need
Phillips Head
Screwdriver
Phillips Head
Screwdriver
6 x Cam Bolts
(H3)
Attach 1 x CL Runner Track (H6) and 1 x CR Runner Track (H7) to Left & Right Side Panels
(P3&P4) with 4 x Small Screws (H5). Tighten with a Phillips Head Screwdriver.
Attach 6 x Cam Bolts (H3) to Left & Right Side Panels (P3 & P4) as shown.
Tighten with a Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
1 x CL Runner
Track (H6)
H6
CL
H5
H5
H5
H5
H3
H3 H3
H3 H3
H3
H5
H6
H7
1 x CR Runner
Track (H7)

You will need
Step 3
Step 4
You will need
Separate Cover from USB HUB as shown. Attach 1x USB HUB to Rail (P7) with 4x Screws (H17)
by tightening with a Philips Head Screwdriver. Attach Cover to USB HUB as shown.
Attach 2 x Hinges (H18) to Rail (P5) with 4 x Screws (H5). Tighten with a
Phillips Head Screwdriver.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(P7)
(P7)
(P5)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H5 H5
H5 H5
H5 H5
H18
H18
H18
1 x USB
Connector
(H14)
4 x Screws
(H17)
4 x Small
Screws (H5)
2 x Hinges
(H18)
H17
Separate
Cover
Separate
Cover
H17
H17
H17 H17
H17
H14 H14
H14

Attach Rail (P5) to Right Side Panel (P4) with 2 x Cam Nuts (H4). Tighten with a Phillips
Head Screwdriver.
Insert 3 x Dowels (H1) into Right Side Panel (P4). Attach Rails (P6&P7) to Right
Side Panel (P4) with 1 x Cam Nut (H4). Tighten with a Phillips Head Screwdriver.
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
You will need
Phillips Head
Screwdriver
Step 6
1 x Cam Nuts
(H4)
You will need
Phillips Head
Screwdriver
Step 5
2 x Cam Nuts
(H4)
(P4)
(P5)
(P4)
(P6)
(P7)
fantasticfurniture.com.au Page 7
H4
H4 H1
H4
3 x Dowels
(H1)

You will need
Step 7
Insert 3 x Dowels (H1) into Rails (P6 & P7). Attach Left Side Panel (P3) to Rails
(P5 & P6 & P7) with 3 x Cam Nuts (H4). Tighten with a Phillips Head Screwdriver.
Slide Back Panel (P8) into the grooves of Left & Right Side Panels (P3&P4) as shown.
Step 8
Phillips Head
Screwdriver
(P5)
(P8)
(P7) (P6)
(P3)
(P3)
(P4)
fantasticfurniture.com.au Page 8
H4
H4
H4
H1
3 x Cam Nuts
(H4)
3 x Dowels
(H1)
Ensure laminated
side of panel is
facing inwards.

You will need
Step 9
Attach 4 x Brackets (H10) to Legs (P10x4) secure with 8 x Bolts (H11). Tighten with
an Allen Key (H16). Attach Legs (P10x4) to Bottom Panel (P2) and secure with 16 x
Screws (H15). Tighten with a Phillips Head Screwdriver.
Insert 4 x Dowels (H1) into Left & Right Side Panels (P3&P4). Attach Bottom Panel (P2) to
Left & Right Side Panels (P3&P4) with 4 x Medium Screws (H2). Tighten with a Phillips Head
Screwdriver.
(P3)
(P4)
(P2)
(P10)
(P10)
(P10)
(P10)
(P10)
(P2)
fantasticfurniture.com.au Page 9
Phillips Head
Screwdriver
H2
H2
H2
H2
H15
H15
H15
H15
H10
H11 H11
H16
H15
H1
H1
H1
You will need
Step 10
4 x Dowels
(H1)
4 x Medium
Screws (H2)
8 x Bolt
(H11)
4 x bracket
(H10)
1 x Allen Key
(H16)
Phillips Head
Screwdriver
16 x Screws
(H15)

Attach 4 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
You will need
Step 12
Attach Top Panel (P9) to Rail (P5) with 4x Small Screws (H5) by tightening with the Phillips
Head Screwdriver.
(P3)
(P5)
(P9)
(P4)
(P1)
fantasticfurniture.com.au Page 10
H3
H3
H3
H3
H5
H5
H5 H5
H18
H18
H18
You will need
Step 11
4 x Small
Screws (H5)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)