Teknion CWTF Operating and maintenance instructions

Flat Edge (CWTF), Knife Edge (CWTK), Flat Wood-Metal, Edge USB (CWTM) and Extended Knife, Edge Power Conference
Table (CWTP)
Section:
Description: Page No:
Date:
Rev. No: 2
CONFERENCE TABLE
TABLES
May 2022 1 of 21
TCW_101
custom wood Installation Guides
Width 96" to 108"
Width 120" to 192" Enclosed Base Width 120" to 192"
NOTE : Flat Edge (CWTF) used for reference

Part and Product Identification
A - Flat Edge
Width 96" to 108"
(CWTF) x1
Section:
Description: Page No:
Date:
Rev. No: 0
CONFERENCE TABLE
TABLES
May 2022 2 of 21
TCW_101
custom wood Installation Guides
Flat Edge
Width 120" to 192"
(CWTF) x1
Flat Edge
Width 204" to 240"
(CWTF) x1
B - Knife Edge
Width 96" to 108"
(CWTK) x1
Knife Edge
Width 120" to 192"
(CWTK) x1
Knife Edge
Width 204" to 240"
(CWTK) x1
C - Flat Wood-Metal,
Edge USB
Width 96" to 108"
(CWTM) x1
Flat Wood-Metal,
Edge USB
Width 120" to 192"
(CWTM) x1
Flat Wood-Metal,
Edge USB
Width 204" to 240"
(CWTM) x1
D - Extended Knife,
Edge Power
Width 96" to 108"
(CWTP) x1
Extended Knife,
Edge Power
Width 120" to 192"
(CWTP) x1
Extended Knife,
Edge Power
Width 204" to 240"
(CWTP) x1
E1 - Leg
150 mm Open x qty varies
E2 Fully Enclosed Gable
End Assembly
150 mm In-fill x qty varies
E3 Leg
300 mm In-fill x qty varies
F - Frame Assembly
Width 96" to 108" x1
G - Frame Assembly
Width 120" to 240" x2
H - Rail
Width 120" to 240"
xqty varies
I - 1/4-20x5/8" Cross/Sq. Comb,
Sock, Fl, Hd, Mach, Steel, Zn
x qty varies
K - #10x0.875" Lg.
Screw, Quad. Pan
Washer x qty varies
L - 1/4x20x1/2 Pan
Head Phillips x12
J - 1/4-20x5/8" Machine
Screw, Quad. Truss HD
x qty varies
M - Centre Fixed Panel for Wood Base
N09-9516- Qty varies
N - Centre Removable Panel for Wood
Base N09-9517-X - Qty varies
O1 - Full Enclosed Leg Gable
C07-4926- Qty varies
O2 - Full Enclosed Rails
C07-4927- Qty varies
O3 - Full Enclosed Leg false Bottom
C07-5713 - Qty varies
O4 - Wood Base Mid Gable
C07-5713 - Qty varies
O - Wood Enclosure Base
N09-9386-X - Qty varies
P1 - Full Enclosed Leg Shroud
A16-7695- x1
P2 - Shroud Mounting Bracket
A16-8200-x2
P4 - 1/4x20x1/2 Pan
Head Phillips x2
P3 - #10x0.875" Lg.
Screw, Quad. Pan
Washer x 2
P5 - 1
4"-20, 7
16"W, 7
32"
H Hex Nut x2
P - Wood Table Base Shroud
Assy N09-9515-X - Qty varies
Q3 - 1/4x20x1/2 Pan
Head Phillips x2
Q2 - #10x0.875" Lg.
Screw, Quad. Pan Washer x 2
Q1 - Fully Enclosed
Gable Bracket x 2
Q- Gable
Bracket

STEP 2a: Fasten the Legs and Frame Assembly using the screws providedSTEP 1a: Flip the Frame Assembly upside down and install the Legs as shown
Section:
Description: Page No:
Date:
INSTALL LEGS FASTEN LEG AND FRAME ASSEMBLY
TCW_101
3 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
NOTE : For width 96" to 108" only
E
F
NOTE : For width 96" to 108" only
I

STEP 4a: Fasten the Frame and Worksurface using the screws and brackets providedSTEP 3a: Flip the assembled structure upside down and place down the Worksurface
Section:
Description: Page No:
Date:
INSTALL WORKSURFACE FASTEN FRAME AND WORKSURFACE
TCW_101
4 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
A
NOTE : For width 96" to 108" only NOTE : For width 96" to 108" only
J
J
K

STEP 5b: Attach Glass on the wood edged surface.STEP 5a: Attach adhesive tape on the wood edged surface.
Section:
Description: Page No:
Date:
ATTACH ADHESIVE TAP ATTACH GLASS ON THE SURFACE
TCW_101
5 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
NOTE : Glass table tops are separated for shipment with glass top layer detached
from the wood edged subtop surface.
NOTE : Follow this step for Glass table tops only.
6mm Glass top with back
painted at the bottom.
Adhesive Strips
NOTE : Place Glass Top Centred on the subtop.
Wood Edged Subtop

STEP 2b: Fasten the Legs and Frame Assembly using the screws providedSTEP 1b: Flip the Frame Assembly upside down and install the Legs as shown
Section:
Description: Page No:
Date:
INSTALL LEGS FASTEN LEG AND FRAME ASSEMBLY
TCW_101
6 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
NOTE : For width 120" to 240"
G
E
NOTE : For width 120" to 240"
I

STEP 4b: Hold the Leg and Frame Assembly from sides and install Rails
STEP 3b: Place the Leg and Frame Assembly upside down
STEP 5b: Fasten the Bracket and Rail on each side using screws provided
Section:
Description: Page No:
Date:
PLACING
INSTALL RAILS
FASTEN THE BRACKET AND RAIL
TCW_101
7 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
NOTE : 300 mm Leg is self standing while
150 mm Legs will be needing a support to
lean on
NOTE : For width 120" to 240"
NOTE : For width 120" to 240"
NOTE : For width 120" to 240"
H
L

STEP 7b: Fasten the Bracket and Rail using the screws providedSTEP 6b: Install the other end Leg and Frame Assembly while holding the previous assembly
from sides for support
Section:
Description: Page No:
Date:
INSTALL LEG AND FRAME ASSEMBLY FASTEN BRACKET AND RAIL
TCW_101
8 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
NOTE : For width 120" to 240" NOTE : For width 120" to 240"
G
E
L

STEP 9b: Fasten the Leg and Rail using screws providedSTEP 8b: Install a Leg in the middle by tilting the structure
Section:
Description: Page No:
Date:
INSTALL LEG FASTEN LEG AND RAIL
TCW_101
9 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
NOTE : For width 156" and above, a Leg in the middle
will be installed for support
NOTE : For width 156" and above only
E
I

STEP 11b: Fasten the Frame and Worksurface using the screws and brackets providedSTEP 10b: Install the Worksurface by placing it on the Frame
Section:
Description: Page No:
Date:
INSTALL WORKSURFACE FASTEN FRAME AND WORKSURFACE
TCW_101
10 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
A
NOTE : For width 120" to 240" NOTE : For width 120" to 240"
J
J
K
J
J

STEP 15b: Attach Glass on the wood edged surface.STEP 14b: Attach adhesive tape on the wood edge surface.
Section:
Description: Page No:
Date:
ATTACH ADHESIVE TAP ATTACH GLASS ON SURFACE TOP
TCW_101
11 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
NOTE : Glass table tops are separated for shipment with glass top layer detached
from the wood edged subtop surface.
·Align Glass Tops at Centre, ensuring glass seam and subtop. seam match,
follow marking on the glass(Blue Tape).
·Adjust Glass Tops to ensure they are centred on the subtops.
Width 120" to 192"
NOTE: Follow this step for Glass table tops only.
Adhesive Strips
6mm Glass top with back
painted at the bottom.
Wood Edged Subtop

STEP 15c: Attach Glass on the wood edged surface.STEP 14c: Attach adhesive tape on the wood edge surface.
Section:
Description: Page No:
Date:
ATTACH ADHESIVE TAP ATTACH GLASS ON SURFACE TOP
TCW-101
12 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
Adhesive Strips
6mm Glass top with back
painted at the bottom.
Wood Edged Subtop
NOTE : Glass table tops are separated for shipment with glass top layer detached
from the wood edged subtop surface.
·Align Cntre Glass Top first, ensuring glass seam and subtop seam match.
·Work Out Towards ends, ensuring glass is centred on subtops. Follow
marking on the glass(Blue Tape).
·Adjust Glass Tops to ensure they are centred on the subtops.
NOTE: Follow this step for Glass table tops only. Width 204" to 240"

STEP 2d: Attach sides rails of the inner frame to the panel and secure with shoulder screws as
shown.
STEP 1d: Attach Outer leg to the inner frame panel and secure with shoulder screws in the pre
drilled holes.
Section:
Description: Page No:
Date:
ATTACHAND SECURE LEGS TO THE FRAME ATTACH AND SECURE INNER FRAME RAILS
TCW_101
13 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
O1
E2
O2
NOTE: For Enclosed base only. NOTE: For Enclosed base only.

STEP 3b: Attach Mid Gable to the rail and secure with connector bolts as shown.
STEP 4b: Attach rails to the frame from other side.
STEP 5b: Attach panel to the outer legs as shown and secure with connector bolts.
Section:
Description: Page No:
Date:
ATTACH MID GABLE TO FRAME RAILS ATTACH INNER FRAME RAILS
ATTACH PANEL TO LEGS
TCW_101
14 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
O4
O1
NOTE: For Enclosed base only. NOTE: For Enclosed base only.

STEP 6d: Attach outer leg to the inner frame and secure with connector bolts in predrilled
holes as in step 2d.
STEP 7d: Attach plastic filler stripes to the fixed or center panel.
STEP 8d: Attach form filler stripes to outer edges of removable panels.
Section:
Description: Page No:
Date:
ATTACH AND SECURE LEGS ATTACH FILLER STRIPES
ATTACH FILLER STRIPES
TCW_101
15 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
E2
M
N
NOTE: For Enclosed base only. NOTE: For Enclosed base only.
NOTE: For Enclosed base only.

STEP 10d: Attach removable panel using Z-clips on the frame as shown.STEP 9d: Attach and secure fixed panel to the frame with connector bolts in the pre drilled
holes.
Section:
Description: Page No:
Date:
ATTACH FIXED CENTRE PANEL ATTACH SIDE PANEL
TCW_101
16 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
M
N
NOTE: For Enclosed base only. NOTE: For Enclosed base only.

STEP 11d: Attach curved metal Panel to the table using magnets attached to the panel.
STEP 12d: Attach and secure bracket to the rail as shown.
STEP 13d: Secure curved panel using nut and bolt as shown.
Section:
Description: Page No:
Date:
ATTACH CURVED OUTER PANEL ATTACH AND SECURE BRACKET
SECURE CURVED PANEL
TCW_101
17 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
P1
P2 P3
P4 P5
NOTE: For Enclosed base only. NOTE: For Enclosed base only.

STEP 15d: Secure rail as shown.STEP 14d: Attach rail to the frame as shown.
Section:
Description: Page No:
Date:
ATTACH RAIL SECURE RAIL
TCW_101
18 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
G
J
NOTE: For Enclosed base only.
NOTE: For Enclosed base only.

STEP 18d: Fasten the Bracket and Rail on each side using screws provided.STEP 16d: Install rails to the frame.
Section:
Description: Page No:
Date:
ATTACH RAIL SECURE RAIL AND BRACKET
TCW_101
19 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
H
L
NOTE: For Enclosed base only.
NOTE: For Enclosed base only.

STEP 19d: Attach frame to the rail.
STEP 20d: Fasten and secure the frame with screws as shown.
STEP 21d: Fasten frame and bracket on each side with the screws provided as shown.
Section:
Description: Page No:
Date:
ATTACH RAIL SECURE RAIL
FASTEN RAIL AND BRACKET
TCW_101
20 of 21
May 2022
CONFERENCE TABLE
TABLES
custom wood Installation Guides
G
J
L
NOTE: For Enclosed base only.
NOTE: For Enclosed base only.
NOTE: For Enclosed base only.