Teknion hiSpace Basic Height-Adjustable Extended Corner Complete Table... Operating and maintenance instructions

hiSpace Basic Height-Adjustable Extended Corner Complete Table (YJS),
hiSpace Height-Adjustable Leg Riser Kit (YSRK)
Section:
Description: Page No:
Date:
Rev. No: 2
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
Sept 2022 1 of 19
COM_136
complements Installation Guides
A1
B1
B2
B3
B4A
B6
B7
B8
NOTE: Extended Electric Model (9E) is
shown below

Part and Product Identification
Section:
Description: Page No:
Date:
Rev. No: 2
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
Sept 2022 2 of 19
COM_136
complements Installation Guides
A - HA Extended Corner Worksurface
A1 - Main Worksurface
(C07-7015) x1
A2 - Return Worksurface
(C07-7378) x1
B - hiSpace Quick Connect Assy (N01-4870) x 1
B1 - Leg Mount Bracket Ql
hiSpace (N09-9873) x 2
B2 - Leg Mount Bracket Short Ql
hiSpace (N09-4900) x 1
B3 - 3PT Stiffener (A16-11207X)
x2
B4A - KAIDI Ql BIFMA Range Leg
(N09-9282) x 3
B9 - 3.05 US Power Cable, hispace
(N09-9456) x 1
B10 - Control Box for 3 Leg BIFMA
System with Anti-Collision
(N09-9457) x 1
B11 - hiSpace Motor Cable
(N09-9455/10) x 2
(N09-9455/25) x 1
C3 - (KAIDI) WOOD SCREW
3.5x15mm (E01-1417) x 10
C1 - #10x0.875" Screw
(E07-0077) x 70
C2 - M5x0.8, 12mm
Philips Head Screw(E01-1106) x2
C4 - Cable Clamp 3/8, BLK
(B02-0558) x 10
C5 - M6x16, SHCS
(E04-0096) x 12
B4B - KAIDI Ql Fixed Height Leg
(N01-7475) x 3
B5 - Cam Handle hiSpace (N09-9814) x 3
B6 - YS Feet (Pair), hiSpace table
(N09-5784/24) x 1
B7 - YS Foot 6 inch (N09-9458X) x 1
B8 - Flush Plate (A16-4002) x 2
C - hiSpace Hardware Kit for 3-point Base (X05-0576) x 1
D - Keypad/Toggle Switch (N01-7336)/(D06-4276) x1
D1- Keypad, hiSpace Table
(D06-4276) x 1
D3 - 3.5x19mm Wood Screw
(E01-1470)x 2 or 3
D2- Kaidi - hiSpace Toggle Switch
(N01-7336)x1
E - Complements Plastic Tray Cable Mgmt (YEYS) x1
E1 - Plastic Tray Cable Management
(YEYS01/02) x1
F - VWC- Hi-Space Workstation (N01-5114-X) x1
F1 - Vertical Wire
Carrier (N01-4577-X) x1
F2 - Vertical Wire
Carrier Cover
(N09-8474-X) x1
F3 - VWC Hardware
Kit (X01-3933) x1
Refer to COM_151a for Cable Organizer (YEYA)
Refer to COM_151b for Cable Management (YEYS)
Refer to COM_102e for Vertical Wire Carrier (N01-5114-X)
C6- M5x20, Phillips, Truss Head,
BLK (E07-0203) x4
B7 - (KAIDI) WOOD SCREW
5 x 25mm,(E01-1415) x 2

STEP 2: Attach Reinforcement Bar to Worksurface as shown above.STEP 1: Attach Legs Mount Brackets to Worksurface as shown above.
Section:
Description: Page No:
Date:
ATTACH BRACKETS TO WORKSURFACE ATTACH REINFORCEMENT BAR
COM_136
3 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
B1
B2
B3
C1
C1
complements Installation Guides

STEP 4A: Push Legs to Outer side of the Worksurface.STEP 3A: Attach legs to Worksurface as shown above.
Section:
Description: Page No:
Date:
ATTACH LEGS TO WORKSURFACE SECURE LEGS TO WORKSURFACE
COM_136
4 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
B4A
complements Installation Guides

STEP 4B: Push Legs to Outer side of the Worksurface.STEP 3B: Attach legs to Worksurface as shown above. Line up the mating holes on the leg
mount to the leg.
Section:
Description: Page No:
Date:
ATTACH LEGS TO WORKSURFACE SECURE LEGS TO WORKSURFACE
COM_136
5 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
B4B
complements Installation Guides
NOTE: Fixed Leg Assembly shown Below

Section:
Description: Page No:
Date:
SECURE LEGS TO BRACKETS - 1 SECURE LEGS TO BRACKETS - 2
COM_136
6 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 6: Insert Pin and lock the Cam handle as shown above.STEP 5: Install Cam Handle as shown above and check ensure leg is locked in place.
B5
B5
complements Installation Guides
NOTE: Steps 5 to 19 are identical for
Extended height and Fixed height
Configurations.

Section:
Description: Page No:
Date:
ATTACH FEET TO LEGS FASTEN FEET TO LEGS
COM_136
7 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 8: Attach Feet to legs with screws provided.STEP 7: Position feet to the mating concentric holes on the leg
B1
B6
C5
B7
complements Installation Guides

Section:
Description: Page No:
Date:
ATTACH FLUSH PLATES TO WORKSURFACE ATTACH BRACKETS TO WORKSURFACE
COM_136
8 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 10: Attach Leg Mount Brackets to Return Worksurface as shown above.STEP 9: Attach Flush Plates to Worksurface as shown above.
B8
C1
B2
C1
complements Installation Guides

Section:
Description: Page No:
Date:
ATTACH BARS TO WORKSURFACE SECURE LEGS TO WORKSURFACE
COM_136
9 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 12: Attach legs to Retun Worksurface as shown above.STEP 11: Attach Reinforcement Bars to Return Worksurface as shown above.
C1
B3
B4A
complements Installation Guides

Section:
Description: Page No:
Date:
SECURE LEGS TO WORKSURFACE SECURE LEGS TO BRACKETS
COM_136
10 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 14: Install Cam Handle as shown above and Make sure its Locked in then, insert Pin and
lock the Cam Handle as shown above.
STEP 13: Push Legs to Outer side of the Return Worksurface.
B5
complements Installation Guides

Section:
Description: Page No:
Date:
ATTACH FEET TO LEGS ATTACH FEET TO LEGS (OPTIONAL)
COM_136
11 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 16: Attach Feet to legs with screws provided.STEP 15: Position feet to the mating concentric holes on the leg
B6
complements Installation Guides
C5

Section:
Description: Page No:
Date:
MERGE RETURN ASSEMBLY
Sept 2022 12 of 19
COM_136
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 17: Align Return Worksurface Assembly to the side of main Worksurface as shown above.
complements Installation Guides

Section:
Description: Page No:
Date:
FASTEN FLUSH PLATE
Sept 2022 13 of 19
COM_136
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 18: Fasten screws on the Flush Plate from the Return Worksurface side.
C1
complements Installation Guides

Section:
Description: Page No:
Date:
FASTEN SCREWS ON REFORCEMENT BARS
Sept 2022 14 of 19
COM_136
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 19: Fasten screws on the Reinforcement Bars on the Main Worksurface side.
C1
complements Installation Guides

Section:
Description: Page No:
Date:
DISASSEMBLE FELT COVER ATTACH WIRING BRACKET
COM_136
15 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 21: Attach Wiring Bracket as shown above with screws provided.STEP 20: Attach legs to Worksurface as shown above.
C6
complements Installation Guides
NOTE: Only for Extended Electric (9E)

Section:
Description: Page No:
Date:
ATTACH CONTROL BOX
Sept 2022 16 of 19
COM_136
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 22: Attach Control Box to Wiring Bracket.
C7
B10
complements Installation Guides
NOTE: Only for Extended Electric (9E)

Section:
Description: Page No:
Date:
CONNECT WIRES
Sept 2022 17 of 19
COM_136
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 23: Connect wires as shown above.
B11
D1
B9
D3
complements Installation Guides
NOTE: Only for Extended Electric (9E)
NOTE: Can use Keypad (D06-4276)
OR Toggle Switch (N01-7336)
D3

Section:
Description: Page No:
Date:
REASSEMBLE FELT COVER SECURE FELT COVER
COM_136
18 of 19
Sept 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 25: Rotate the Screw Locks to secure the cover.STEP 24: Attach Felt Cover as shown above.
complements Installation Guides
NOTE: Only for Extended Electric (9E)
NOTE: Only for Extended Electric (9E)

Section:
Description: Page No:
Date:
PLACE CABLE CLAMPS
Sept 2022 19 of 19
COM_136
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 26: Attach Cable Clamps as shown above with screws provided
C4
C3
complements Installation Guides
NOTE: Only for Extended Electric (9E)