Teknion Complements User manual

hiSpace Basic 120 HA Freestanding Table Base Only (YNS), HA Worksurface for hiSpace Basic 120 (WBS), HA
Worksurface with Radius Corners for hiSpace Basic 120 (WJS) hiSpace Height-Adjustable Leg Riser Kit (YSRK)
Section:
Description: Page No:
Date:
Rev. No: 2
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
Oct 2022 1 of 12
COM_137
complements Installation Guides
A1
B7
B6
B4A
B2
B1
B3

Section:
Description: Page No:
Date:
Rev. No: 2
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
Oct 2022 2 of 12
COM_137
complements Installation Guides
Part and Product Identification
B - hiSpace Quick Connect120 Assy (N01-4897) x 1
B1 - Leg Mount Bracket Ql
hiSpace (N09-9873) x 2
B2 - Leg Mount Bracket Short Ql
hiSpace (N09-4900) x 1
B5 - Cam Handle hiSpace
(N09-9814) x 3
B6 - YS Feet (Pair), hiSpace table
(N09-5784/24) x 1
B7 - YS Foot 6 inch
(N09-9458X) x 1
B8 - 3M US/Canada Power Cable
(D06-4136) x 1
B9 - Control Box for 3 Leg BIFMA
System with Anti-Collision
(N09-9457) x 1
B10 - hiSpace Motor Cable
(N09-9455/10) x 2
(N09-9455/25) x 1
A1 - HA Worksurface for hiSpace
Basic 120 (WBS) x 1
A2 - HA Worksurface with Radius
Corners for hiSpace Basic 120
(WJS) x 1
Or
B3 - 3PT Stiffener (A16-11207X)
x 2
B4A - KAIDI Ql BIFMA Range Leg
(N09-9282) x 3
B4B - KAIDI Ql Fixed Height Leg
(N01-7475) x 3
D1- Keypad, hiSpace Table
(D06-4276) x 1
B12 - (KAIDI) WOOD SCREW
3.5x15mm (E01-1417) x 10
C1 - #10x0.875" Screw
(E07-0077) x 46
C2 - M5x0.8, 12mm
Philips Head Screw(E01-1106) x2
B13 - Cable Clamp 3/8, BLK
(B02-0558) x 10
C3 - M6x16, SHCS
(E04-0096) x 12
D3 - 3.5x19mm Wood Screw
(E01-1470)x 2 or 3
B11 - (KAIDI) WOOD SCREW
5 x 25mm,(E01-1415) x 2
C - hiSpace Hardware Kit (X05-0577) x 1
D - Keypad/Toggle Switch (N01-7336)/(D06-4276) x1
E1 - Plastic Tray Cable Management
(YEYS01/02) x1
E - Complements Plastic Tray Cable Mgmt (YEYS) x1
F - VWC- Hi-Space Workstation (N01-5114-X) x1
F1 - Vertical Wire
Carrier (N01-4577-X) x1
F2 - Vertical Wire
Carrier Cover
(N09-8474-X) x1
F3 - VWC Hardware
Kit (X01-3933) x1
Refer to COM_151a for Cable Organizer (YEYA)
Refer to COM_151b for Cable Management (YEYS)
Refer to COM_102e for Vertical Wire Carrier (N01-5114-X)
D2- Kaidi - hiSpace Toggle Switch
(N01-7336)x1
B14 - M5x20, Phillips, Truss Head,
BLK (E07-0203) x4

STEP 2: Attach Reinforcement Bar to Worksurface as shown above.STEP 1: Attach Legs Mount Brackets to Worksurface as shown above.
Section:
Description: Page No:
Date:
ATTACH BRACKETS TO WORKSURFACE ATTACH REINFORCEMENT BAR
COM_137
3 of 12
Oct 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
B1
B2
complements Installation Guides
B3
C1
C1

STEP 4A: Push Legs to Outer side of the Worksurface.STEP 3A: Attach legs to Worksurface as shown above. Line up the mating holes on the leg
mount to the leg.
Section:
Description: Page No:
Date:
ATTACH LEGS TO WORKSURFACE SECURE LEGS TO WORKSURFACE
COM_137
4 of 12
Oct 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
B4A
complements Installation Guides

STEP 4B: Push Legs to Outer side of the Worksurface.STEP 3B: Attach legs to Worksurface as shown above. Line up the mating holes on the leg
mount to the leg.
Section:
Description: Page No:
Date:
ATTACH LEGS TO WORKSURFACE SECURE LEGS TO WORKSURFACE
COM_137
5 of 12
Oct 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
B4B
complements Installation Guides
NOTE: Fixed Leg Assembly shown Below NOTE: Fixed Leg Assembly shown Below

Section:
Description: Page No:
Date:
SECURE LEGS TO BRACKETS - 1 SECURE LEGS TO BRACKETS - 2
COM_137
6 of 12
Oct 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 6: Insert Pin and lock the Cam handle as shown above.STEP 5: Install Cam Handle as shown above and Make sure it's Locked in.
B5
complements Installation Guides
NOTE: Steps 5 to 8 are identical for
Extended height and Fixed height
Configurations.

Section:
Description: Page No:
Date:
ATTACH FEET TO LEGS FASTEN FEET TO LEGS
COM_137
7 of 12
Oct 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 8: Attach Feet to legs with screws provided.STEP 7: Position feet to the mating concentric holes on the leg
B7
complements Installation Guides
B6
C3

Section:
Description: Page No:
Date:
DISASSEMBLE FELT COVER ATTACH WIRING BRACKET
COM_137
8 of 12
Oct 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 10: Attach Wiring Bracket as shown above with screws provided.STEP 9: Attach legs to Worksurface as shown above.
complements Installation Guides
NOTE: Only for Extended Electric (9E) NOTE: Only for Extended Electric (9E)
B14

Section:
Description: Page No:
Date:
ATTACH CONTROL BOX
Oct 2022 9 of 12
COM_137
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 11: Attach Control Box to Wiring Bracket.
complements Installation Guides
B9
B11
NOTE: Only for Extended Electric (9E)

Section:
Description: Page No:
Date:
CONNECT WIRES
Oct 2022 10 of 12
COM_137
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 12: Connect wires as shown above.
complements Installation Guides
D1
B10
NOTE: Only for Extended Electric (9E)
NOTE: Can use Keypad (D06-4276)
OR Toggle Switch (N01-7336)
D2
D3
B8

Section:
Description: Page No:
Date:
REASSEMBLE FELT COVER SECURE FELT COVER
COM_137
11 of 12
Oct 2022
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 14: Rotate the Screw Locks to secure the cover.STEP 13: Attach Felt Cover as shown above.
complements Installation Guides
NOTE: Only for Extended Electric (9E)

Section:
Description: Page No:
Date:
PLACE CABLE CLAMPS
Oct 2022 12 of 12
COM_137
HA TABLES - QUICK CONNECT
HEIGHT-ADJUSTABLE TABLES
STEP 15: Attach Cable Clamps as shown above with screws provided
complements Installation Guides
B13
B12
NOTE: Only for Extended Electric (9E)