Teknion COMPLEMENTS NAVIGATE TABLE - ELECTRIC Operating and maintenance instructions

Navigate Height Adjustable - Electric (YAH_7 & YAH_9) & Worksurface for Navigate (WBH & WJH)
Section:
Description: Page No:
Date:
Rev. No: 5
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
May 2022 1 of 10
COM_150b
complements Installation Guides
A
C
J
G
F
E
D
B

Part and Product Identification
Section:
Description: Page No:
Date:
Rev. No: 5
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
May 2022 2 of 10
COM_150b
complements Installation Guides
A - Radius WS
(WJH) x1
Worksurface
(WBH) x1
OR
B - Cross Beam
(A16-6481) x1
C - Foot
(A25-0619) x1
D - Leg
(N09-7918) x2
E - Motor Cable
(N09-8402) x2
F - Strut
(A25-0630) x2
G - Strut Cover
(A25-0631) x2
H - Control Box Cover
(B02-0739) x1
I1 - (P-CBD6SP00020A-109)
Control Box
(N09-5594) x1
I2 - Linak Desk Sensor
(I01-0127) x1
J - Power Cord
(N09-5615) x1
K - Foot
(D06-4088) x4
L - Digital Switch
(N09-8183) x1
Simple Switch
(N09-8192) x1
OR Switch
(N09-5600) x1
Switch
(N09-5796) x1
OR OR
M1 - Bracket
(A16-3970)x1
M2 - #8 5/8" Screw
(E04-0091) x2
M3 - 6x5/8 Screw
(E04-0090) x4
M4 - 3/16" Wire Clamp
(B02-0598) x2
M5 - Grommet
Bushing
(B02-0557) x2
M6 - Cable Clamp
3/8 Nylon Blk
(B02-0558) x2
M7 - #10 Screw
(E01-1009) x2
M8 - #8 Wood Screw
(E04-0074) x2
M9 - 1/4-20x5/8
Screw
(E01-0992) x12
M10 - M6 Screw
(E01-1249) x12
M11 - M5x08-12 Screw
(E01-1289) x4
M12 -M6x10 20mm
Screw
(E01-1253) x8
N1 - Integrated Power
Box with IEC
(N09-8157) x1
N2 - M8x3/8"Pan
HD (E07-0158) x2
O -Power Bar Hole
Cover(B02-0736) x1
Navigate HA Base (N09-8126) x1
Navigate HA Base (N09-8126) x1
N3 - Integrated Power
Box with IEC
(N09-8737) x1
N4 - M8x3/8"PanHD
(E07-0158) x2
P - M8x3/8"Pan
HD (E07-0158) x2
Q - Cable Organiser
YEYA01x1
R1 -Power Bar with IEC
Cable(N09-9780) x1
S1 -Powerbar
(N09-8354) x1
R2 -Plastic Wire
Manager(B02-0736) x2
R3 -#12 Wood Screw
(E04-0087) x6
B1 - Plastic Wire
Manager
(B02-0746) x2
B2 - #12 Wood
Screw
(E04-0087) x6
S2 - Plastic Wire
Manager
(B02-0746) x2
S3 - #12 Wood
Screw
(E04-0087) x6
(YEYS02)x1
(YEYS01) x1 N09-9781
M - Hardware Kit(N09-8126) x1
Cable Management
N5- Exteranl Power Bar
(N09-8254) x1
N6- Screws
(N09-8254) x2

STEP 2: Install Screws as shown above to secure Leg assembly.STEP 1: Slide Height-Adjustable Legs onto the Cross Beam as shown above.
Section:
Description: Page No:
Date:
INSTALL H.A. LEGS SECURE H.A. LEGS
COM_150b
3 of 10
May 2022
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
D
B
M10
M10

STEP 4: Install Strut onto the Frame assembly.STEP 3: Install Foot and Level assembly as shown above.
Section:
Description: Page No:
Date:
INSTALL FOOT AND LEVEL INSTALL STRUT
COM_150b
4 of 10
May 2022
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
K
M12
C
F
M10
NOTE: The frame when dropped while
flipping can cause damage to the
internal mechanism. Hence, two
Installers can carry the frame from each
side and flip it in order to avoid any
damage.
M10
F

STEP 6a: Connect power Box to Control Box as shown above.STEP 5: Install Strut Cover using the Screws provided.
Section:
Description: Page No:
Date:
INSTALL STRUT COVER INSTALL POWER BOX (OPTIONAL)
COM_150b
5 of10
May 2022
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
M11
G
G
M11
I2
N1
J
NOTE: Follow step 6a and 6b
to install Power Box with IEC
outlet(N09-8737).
N3

STEP 7: Install Power Box cover as shown.STEP 6b: Connect power Box to Control Box as shown above.
Section:
Description: Page No:
Date:
SECURE POWER BOX (OPTIONAL) INSTALL POWER BOX COVER(OPTIONAL)
COM_150b
6 of10
May 2022
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
J
N2
NOTE: For No-Power Box
option.
N1
N2
O
P
P
NOTE: Follow step 6a and 6b
to install Power Box with IEC
outlet(N09-8737).

Section:
Description: Page No:
Date:
INSTALL ELECTRIC WIRE
May 2022 7 of 10
COM_150b
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
STEP 8: Connect the Motor Cable and Power Cable, and Switch Cable to the legs and Motor Box as shown.
NOTE: No-Power Box option
is shown.
I
E
L
I2
L
I2
E
I
J
L
J
E

Section:
Description: Page No:
Date:
INSTALL WORKSURFACE
May 2022 8 of 10
COM_150b
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
STEP 9: Install worksurface as shown above. Secure Frame Assembly, Switch and Control Box. then install Control Box Cover onto the Cross Beam.
M8
L
M9
M7
M5
A
J
H
M1
L
LM2
NOTE: No Power Box option
is shown.

STEP 10: Install worksurface as shown above. Secure Frame Assembly, Switch and Control
Box. then install Control Box Cover onto the Cross Beam.
Section:
Description: Page No:
Date:
INSTALL STRUT COVER INSTALL POWER BOX (OPTIONAL)
COM_150b
9 of 10
May 2019
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
L11
F
F
L11
STEP 11: Attach and secure external Power Box as shown.
N6
N5
NOTE: Position of the External
Power Box is for reference only. It can
be shifted as per user's preference.

Section:
Description: Page No:
Date:
WIRE MANAGEMENT
May 2022 10 of 10
COM_150b
COMPLEMENTS NAVIGATE TABLE - ELECTRIC
H.A. TABLES
complements Installation Guides
STEP 12: Install Wire and Cable Clamps in recommended locations.
M6 - Cable Clamp
M4 - Wire Clamp
NOTE: Place Wire Management
as shown as diagram
Right Hand Side
Left Hand Side
M4
M3
M6
M3
NOTE: Follow Install guide COM_151a,
COM_15bb for Cable Management.