Teknion HWBEWT Operating and maintenance instructions

Wire Bridge (HWBEWT) Part and Product Identification
A - Wire Bridge Mounting Plate
Assy, 120
(N01-7566) x 1
Section:
Description: Page No:
Date:
Rev. No: 0
WIRE BRIDGE
HEIGHT ADJUSTABLE BENCH
Oct 2022
1 of 4
HABH_122
height-adjustable bench Installation Guides
B - Wire Bridge, 120
(A16-10909) x 1
C - MK_M6x1.0x16mm_ST_ZN
_MH_SK
(E01-1409) x 6
D - ST-#10-32x0.375_NI_TS_QD
(E07-0084) x 6
A
B
NOTE: Mounting Plate- A is assembled to the Frame link Assembly (N07-7481), refer HABH_120 install guide

Section:
Description: Page No:
Date:
ATTACH WIRE BRIDGE MOUNTING PLATE
Oct 2022
2 of 4
HABH_122
WIRE BRIDGE
HEIGHT ADJUSTABLE BENCH
height-adjustable bench Installation Guides
STEP 1: Attach Wire Bridge Mounting Plate to Frame Link Assembly (N01-7481).
NOTE: Similar step can be used for both Fixed (HWBFYT2F) and Height Adjustable Bench (HWBFYT9E)
A
D
DA

Section:
Description: Page No:
Date:
ATTACH WIRE BRIDGE, 120
Oct 2022
3 of 4
HABH_122
WIRE BRIDGE
HEIGHT ADJUSTABLE BENCH
height-adjustable bench Installation Guides
STEP 2A: Insert the Wire Bridge into the Double-Sided Spine tray and place fastener (E01-1409) in the Mounting Plate (N01-7566)
NOTE: Similar step can be used for both Fixed (HWBFYT2F) and Height Adjustable Bench (HWBFYT9E)
B
C
Double-Sided Spine Tray
NOTE: Don't tighten the Fastner (E01-1409)
NOTE: Shown only one Wire Bridge,
120 for illustration, follow the same
steps for other 2 Wire Bridge, 120.

Section:
Description: Page No:
Date:
SECURE WIRE BRIDGE
Oct 2022
4 of 4
HABH_122
WIRE BRIDGE
HEIGHT ADJUSTABLE BENCH
height-adjustable bench Installation Guides
STEP 2A: Slide the Wire Bridge into the Fastner (E01-1409) using the groove provided in the Wire bridge and secure the Wire bridge
B
C
B
NOTE: Shown only one Wire Bridge,
120 for illustration, follow the same
steps for other 2 Wire Bridge, 120.
NOTE: Similar step can be used for both Fixed (HWBFYT2F) and Height Adjustable Bench (HWBFYT9E)