Teknion HNBFNZ User manual

Navigate Double-Sided HA Frame (HNBFNZ), Navigate Rectangular Worksurface (HNBWRS),
Navigate Rectangular Extended Worksurface (HNBWES)
Section:
Description: Page No:
Date:
Rev. No: 1
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
Feb 2022 1 of 14
HABN_124
height-adjustable bench Installation Guides
A6
A4
B
A16
A15
A4
A5
A7
A3
A2
A1

Section:
Description: Page No:
Date:
Rev. No: 1
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
Feb 2022 2 of 14
HABN_124
A1 - Navigate HAB Leg
Assy (N09-8583L)x1
Part and Product Identification
A3 - Navigate Cross Beam
(A16-6481)x1
height-adjustable bench Installation Guides
Frame Assembly (N09-9082)x1
A2 - Navigate HAB Leg
Assy (N09-8583R)x1
A4 - HAB Stretcher Assembly
(N09-8606)x2
A5 - Navigate Strut
(A25-0630)x2
A6 - Navigate Strut
Cover (A25-0631)x2
A7 - Control
Cover (B02-0739)x1
A8 - Navigate Control
Module (N09-8185)x1
A9a - Integrated Power
Bar (N08-8157)x1
A14 - Hardware Kit (X05-0478)x1
A14a - Screw 1/4-20x5/8, QD
MCHN (E01-0992)x12
A9b - Integrated Power
Bar w/ IEC (N09-8737)x1
A9c - Power Bar Hole
Cover (B02-0736)x1
A10a - Motor Cable PVC -
500 mm (N09-8402\05)x2
A10b - Motor Cable PVC -
1000mm (N09-8402\10)x2
A11 - Navigate Digital
Switch (N09-8183)x1
A12 - Navigate Simple
Switch (N09-8192)x1
A13 - Display Switch w/
Up/Down Memory (N09-5600)x1
OR
OR
OR OR
A14b - M6x1, 14mm Flat
Head Screw (E01-1249)x16
A14c -Machine Screw 5/16-18 x
3/4, Socket Screw (E01-1035)x4
A14e - 3/16" ire Clamp
(B02-0598)x4
A14d - M5x0.8-10, Flat
Head Screw (E01-0989) x4
A14f -#10 Pan Quad Screw
(E01-1009)x2
A14g - Flat Quad Wd
Screw (E04-0090) x9
A14h - Cable Clamp 3/8"
(B02-0558) x5 A14i - Grommet Bushing
(B02-0557) x2
A14j - Linak Memory 90 Deg
Mounting Brkt (A16-3970) x1
A14k - Wd Screw Pan
Quad #8x5/8" (E04-0091) x2
A14l - #8x1 1/4" Wd Screw
(E04-0074) x2
A - Navigate Single Sided Std. Range Electric Frame (HNBFNZ)x1

Section:
Description: Page No:
Date:
Rev. No: 1
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
Feb 2022 3 of 14
HABN_124
A - Navigate Single Sided Std. Range Electric Frame (HNBFNZ)x1
A20 - Cable Felt Organizer
(YEYA01)x1
Part and Product Identification
height-adjustable bench Installation Guides
A22 - Plastic Tray Cable
Management w/ IEC (N09-9781)x1
A21 - Plastic Tray Cable
Management (YEYS01)x1
A19 - Power Supply
(I04-0100)x2
B - Navigate Rectangular
Worksurface HAB
(HNBWRS)x1
A15 - Single Sided Bench Rear Leg
Assy (N09-8573L)x1 A16 - Single Sided Bench Rear Leg
Assy (N09-8573R)x1
A17 - Leg Top Cap
(A25-0668)x2 A18 - Counter Weight
(A25-7750)x8
C - Navigate Rectangular
Worksurface HAB Extended
(HNBWES)x1
OR

STEP 2: Fasten screws to secure legs to Top Channel.
STEP 1: Slide Height-Adjustable legs into the cross beam as shown above.
Section:
Description: Page No:
Date:
INSTALL HEIGHT-ADJUSTABLE LEGS FASTEN SCREWS TO SECURE LEGS
HABN_124
4 of 14
Feb 2022
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
height-adjustable bench Installation Guides
A3
A1
A2
A14b

Section:
Description: Page No:
Date:
ALIGN LEGS
Feb 2022 5 of 14
HAB_124
SINGLE SIDED HA FRAME
FRAME AND WORKSURFACES
height-adjustable bench Installation Guides
NOTE: Align laser mark as shown above before proceeding to the next step. If misaligned, adjust levelers.
NOTE: Use laser mark
tool to check alignment.
Laser Mark
Laser Mark

STEP 4: Attach Strut covers to struts installed and secure with screws provided.
Section:
Description: Page No:
Date:
ATTACH STRUT ATTACH STRUT COVERS
HABN_124
6 of 14
Feb 2022
SINGLE SIDED HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
A5
A5
A14b
STEP 3: Attach Struts to all leg assemblies and Secure using the screws provided.
A5
A6
A14d
A6

STEP 6: Remove covers from Rear Legs. Place Counter weights inside Rear Legs for
Counterbalance.
Section:
Description: Page No:
Date:
ATTACH STRETCHER REMOVE LEG COVER & ADD COUNTER WEIGHTS
HABN_124
7 of 14
Feb 2022
SINGLE SIDED HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
A14c
STEP 5: Attach Stretchers to the Frame as shown above and and Secure using the screws
provided.
A4 A15
A17
A15
A18
A17
A4

Section:
Description: Page No:
Date:
ATTACH REAR LEGS TO STRETCHER BARS
Feb 2022 8 of 14
HABN_124
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
STEP 7: Attach Rear Legs to the Stretcher bars and secure it using the screws provided. Adjust levelers if needed.
height-adjustable bench Installation Guides
Rear Leg
Assembly
A14c
Rear Leg
Assembly

STEP 8b: Attach Power Module Cover as shown above.STEP 8a: Attach Power Module as shown above.
Section:
Description: Page No:
Date:
ATTACH POWER MODULE (OPTIONAL) ATTACH POWER MODULE COVER (OPTIONAL)
HABN_124
9 of 14
Feb 2022
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
height-adjustable bench Installation Guides
A9a
A9c
A9b

Section:
Description: Page No:
Date:
WIRE CONNECTIONS
Feb 2022 10 of 14
HABN_124
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
STEP 9: Make the Wire Connections as shown above.
height-adjustable bench Installation Guides
NOTE: Make sure that the Dongle
is connected to the control box.
A8
A10b
A11
A9b
A10a
A14i

Section:
Description: Page No:
Date:
ATTACH WORKSURFACE TO FRAME
Feb 2022 11 of 14
HABN_124
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
STEP 10: Attach Worksurface to Frame with screws provided.
height-adjustable bench Installation Guides
A14a
B
A14a
A14l
A11
A14a

STEP 11b: Attach Control Box Cover to the Cross Beam.STEP 11a: Secure Control Box to the Worksurface using the Screws provided.
Section:
Description: Page No:
Date:
SECURE CONTROL BOX ATTACH CONTROL BOX COVER
HABN_124
12 of 14
Feb 2022
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
height-adjustable bench Installation Guides
A14f
A7

Section:
Description: Page No:
Date:
ATTACH CABLE CLAMPS
Feb 2022 13 of 14
HABN_124
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
STEP 12: Using wire/Cable Clips and Screws, organize wires as shown above.
height-adjustable bench Installation Guides
A14g
A14e
A14h
A14g

STEP 13b: Refer to COM_151a for Cable Organizer.STEP 13a: Refer to COM_151b for Dual Plastic Tray Cable Management.
Section:
Description: Page No:
Date:
PLASTIC TRAY CABLE MANAGEMENT (OPTIONAL) CABLE ORGANIZER (OPTIONAL)
HABN_124
14 of 14
Feb 2022
FRAMES AND WORKSURFACES
SINGLE SIDED HA FRAME
height-adjustable bench Installation Guides
NOTE: Refer to COM_151a
for Cable Organizer.
NOTE: Refer to COM_151b for Dual
Plastic Tray Cable Management.