Teknion Transit XM TWBS Operating and maintenance instructions

Bullet Top Worksurface - XM Collection (TWBS), Flask Worksurface with
Monoleg - xm Collection (TXFLM), Flask Worksurface with Post Legs - xm
Collection (TXFLP)
Part and Product Identification
A1 - Bullet Top Worksurface
(C05-0934-X) x1
Section:
Description: Page No:
Date:
Rev. No: 01
BULLET TOP WORKSURFACE & FLASK WORKSURFACE (XM COLLECTION)
WORKSURFACES & COUNTERTOPS
May 2018 1 of 3
TST_202
transit Installation Guides
B2 - Worksurface Support Beam
Kit w/ 8xE07-0023 screws
(X05-0027-X) x1
B1 - Flask Worksurface
(C05-0866-X) x1
B3 - Semi-Suspended Monoleg
(TLSM) x1
C1 - Flask Wqorksurface
(C05-0866-X) x1
C3 - xm Post Leg Assembly
(TXPL) x2
C4 - 1/4"-20 x 3/4" Mash Screw
Quad Truss
(E01-2010) x8
B5 - #10 - 1" Square
Socket Pan Head
PBD Screw
(E07-0023) x4
B4 - 1/4"-20 x 5/8"
UNC-2A, Cross/
Square Truss Hd
Machine Screw,
zinc (E01-0098) x4
A2 - Worksurface Support Beam
Kit w/ 8xE07-0023 screws
(X05-0027-X) x1
C2 - Worksurface Support Beam
Kit w/ 8xE07-0023 screws
(X05-0027-X) x1
C - TXFLP A - TWBSB - TXFLM
NOTE:
Installation of Flask Worksurface with
Monoleg (xm Collection)TXFLM is
shown
Off-Module Cantilever Kits must be
ordered separately
B2
B3
B1

STEP 1: Lay Worksurface upside down on a clean surface. Align holes on the support with the
one on the Worksurface. Secure it with the screws provided.
NOTE: Refer to Installation Guide TST_258 for installation of Off-Module Cantilever (TLOF).
STEP 2: Flip Worksurface back up to the original orientation.
STEP 3: Connect the Worksurface to the panel.
Section:
Description: Page No:
Date:
INSTALL LEG AND SUPPORT FLIP ASSEMBLED WORKSURFACE
CONNECT WORKSURFACE TO PANEL
TST_202
2 of 3
May 2018
BULLET TOP WORKSURFACE & FLASK WORKSURFACE (XM COLLECTION)
WORKSURFACES & COUNTERTOPS
transit Installation Guides
B5
B4
B3
B4
B5
B1
B2
B1
B3

STEP 4: Using a leveler adjust the caster until the Worksurface is leveled.
STEP 4: Align the holes on the support with the one on the Worksurface. Secure the
Worksurface using the screws included in the Off-Module Cantilever Kits (TLOF).
Section:
Description: Page No:
Date:
SECURE WORKSURFACE TO SUPPORTS LEVEL WORKSURFACE
TST_202
3 of 3
May 2018
BULLET TOP WORKSURFACE & FLASK WORKSURFACE (XM COLLECTION)
WORKSURFACES & COUNTERTOPS
transit Installation Guides
B1
B3
B4
Off-Module
Cantilever
B4