Teknion Navigate 120 HA Frame HNBFNT Operating and maintenance instructions

Navigate 120 HA Frame (HNBFNT) and Navigate 120 Worksurface (HNBWTN)
Section:
Description: Page No:
Date:
Rev. No: 1
120 HA FRAME
FRAMES AND WORKSURFACES
May 2022 1 of 18
HABN_123
height-adjustable bench Installation Guides
B
A8
A9
A6
A9
A5
A7
A4
A10
A3
A1
A10
A10
A2 A4

Section:
Description: Page No:
Date:
Rev. No: 1
120 HA FRAME
FRAMES AND WORKSURFACES
May 2022 2 of 18
HABN_123
height-adjustable bench Installation Guides
Parts & Products Indentification
A - HAB Navigate 120 Frame (HNBFNT) x1
Frame Assm. Std Range Elec (N09-9008) x1
A1 - Navigate 120 HAB
Mid Gable Stratcher
(N09-8966) x1
A2 - Centre Leg Assm.
120 HAB (N09-9011) x3
A3 - Centre Leg Top
Mount (N09-8748) x3
A4 - Cross Beam
(A16-7717) x6
A5 - Navigate HAB Leg
Assm (N09-8583R) x3
A6 - Navigate HAB Leg
Assm (N09-8583L) x3
A7 - Stretcher Assm
(N09-5870) x3
A8 - Navigate Strut
(A25-0630) x6
A9 - Navigate Strut
Cover (A25-0631) x6
A10 - Control Box
Cover (B02-0739) x6
A11 - Programmed
Control Box
(N09-8348) x3
A12a - Integrated Power
Bar (N08-8157)x1
A12b - Integrated Power
Bar w/ IEC (N09-8737)x1
A12c - Power Bar
Hole Cover
(B02-0736)x1
OR
OR
A13a - Motor Cable-
500mm (N09-8402\05)x3
OR
A13b - Motor Cable-
1000mm (N09-8402\10)x3
OR
A13c - Motor Cable-
2000mm (N09-8402\20)x3
OR OR
A14 - Navigate Digital
Switch (N09-8183)x1
A15 - Navigate Simple
Switch (N09-8192)x1
A16 - Display Switch w/
Up/Down Memory (N09-5600)x1
A17 - Hardware Kit (X05-0478)x1
A17a - Screw 1/4-20x5/8, QD
MCHN (E01-0992) x36
A17b - M6x1, 14mm Flat
Head Screw (E01-1249) x84 A17c -Machine Screw 5/16-18 x
3/4, Socket Screw (E01-1035) x18
A17e - 3/16" Wire Clamp
(B02-0598) x6
A17d - M5x0.8-10, Flat
Head Screw (E01-1289) x12
A17f -#10 Pan Quad Screw
(E01-1009) x6
A17g - Flat Quad Wd
Screw (E04-0090) x12
A17h - Cable Clamp 3/8"
(B02-0558) x6 A17i - Grommet Bushing
(B02-0557) x12
A17j - Linak Memory 90 Deg
Mounting Brkt (A16-3970) x3
A17k - Wd Screw Pan
Quad #8x5/8" (E04-0091) x6
A17l - #8x1 1/4" Wd Screw
(E04-0074) x6
A17m - Wd Screw Pan Quad
#12x7/8" (E04-0087) x18

Part and Product Identification
Section:
Description: Page No:
Date:
Rev. No: 1
120 HA FRAME
FRAMES AND WORKSURFACES
May 2022 3 of 18
HABN_123
height-adjustable bench Installation Guides
A18 - Cable Felt Organizer
(YEYA01)x1
A19 - Plastic Tray Cable
Management w/ IEC (N09-9781)x1 A20 - Plastic Tray Cable
Management (YEYS01)x1
B - Navigate 120 Worksurface
(HNBWTN) x1

STEP 2: Assemble legs and Mid Gable stretcher as shown above. Assemble Hanger Plate if mid
gable is specified. Secure it using the Screws provided.
STEP 1: Adjust the Leveller to have a 0.5" Gap on all the Legs.
Section:
Description: Page No:
Date:
LEVELLER ADJUSTMENT ASSEMBLE LEG AND MID GABLE STRATCHER
HABN_123
4 of 18
May 2022
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
0.5"
Hanger
Plate
NOTE: For Mid Gable assembly,
refer to HABN_224b.
A6
A2
A5
A2 A1
A17c

STEP 4: Assemble Centre Top mount with screws provided.STEP 3: Attach Power pole mount as shown above with screws and washers provided.
Section:
Description: Page No:
Date:
ATTACH POWER POLE MOUNT (OPTIONAL) ASSEMBLE CENTRE LEG TOP MOUNT
HABN_123
5 of 18
May 2022
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
NOTE: For Power Pole assembly,
refer to HABN_324.
A3
Power Pole
Mount
A17b
A3
A3
A17b

Section:
Description: Page No:
Date:
INSTALL CROSS BEAM
May 2022 6 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 5: Place Cross Beam as shown. Secure the cross beam using the Screws provided.
A4
A3
A3
A17b

Section:
Description: Page No:
Date:
INSTALL LEG ASSEMBLIES
May 2022 7 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 6: Place Cross Beam into the cross beam. Secure the Leg assemblies using the screws provided.
A17b
A6 A5
A5
A6 A17b

Section:
Description: Page No:
Date:
INSTALL STRETCHER WELDMENT
May 2022 8 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 7: Align Stretcher Weldment as as shown above. Assemble Stretcher weldment with screws provided.
A7
A7
A7
A17c
A17c

Section:
Description: Page No:
Date:
ALIGN LEGS
May 2022 9 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
NOTE: Adjust the Levelers to bring the legs into the same horizontal plane determined with the self-leveling laser leveler, before proceeding to the next step. Refer to Step 1 to adjust levelers.
NOTE: Use Laser Mark
tool to check alignment.
NOTE: The Unit must be leveled at the exact location of
use. If moved after installation or initial leveling, follow
Step 1 and Re-align according to the floor profile.
Laser Mark

Section:
Description: Page No:
Date:
ATTACH STRUTS TO FRAME
May 2022 10 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 8: Attach the Struts to the Leg assemblies and Secure it using the Screws provided.
A8
A8
A8
A17b

Section:
Description: Page No:
Date:
ATTACH STRUT COVERS
May 2022 11 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 9: Attach the Strut Covers and Secure it using the Screws provided.
A9
A9
A9
A9
A17b

STEP 10b: Attach Power Module Cover as shown above and Secure using the screws provided.STEP 10a: Attach Power Module as shown above and Secure using the Screws provided.
Section:
Description: Page No:
Date:
POWER MODULE (OPTIONAL) POWER MODULE COVER (OPTIONAL)
HABN_123
12 of 18
May 2022
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
OR
A12a
A12b
A12c

Section:
Description: Page No:
Date:
WIRE CONNECTION
May 2022 13 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 11: Connect all Wire as shown above.
NOTE: Plug IEC Connector from item A12a into item A11 to power the actuator.
NOTE: Plug IEC Connector from item
A12a into item A11 to power the actuator.
A12a
A17i
A13c A13b
A13c
A13b
A13a
A11
A12a
A14
A12a
Dongle
NOTE: Make sure that the Dongle
is connected to the Control Box.

Section:
Description: Page No:
Date:
WORKSURFACE AND SWITCH-1
May 2022 14 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 12: Place Worksurface on the Frame assembly and Fasten with Screws provided. Place the Switch under the Worksurface and Fasten with Screws provided.
A17a
A17l
NOTE: The Power Module wire has
been Hidden for Illustration Purpose.

Section:
Description: Page No:
Date:
WORKSURFACE AND SWITCH-2
May 2022 15 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 13: Align the Side edges and Top Surface with other Worksurfaces.
NOTE: Align Top and Side
edges of all Worksurfaces.

Section:
Description: Page No:
Date:
WORKSURFACE AND SWITCH-3
May 2022 16 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 14: Fasten Worksurfaces with the Frame assembly.
A17m
NOTE: The Power Module wire has
been Hidden for Illustration Purpose.

Section:
Description: Page No:
Date:
ATTACH CONTROL BOX COVER
May 2022 17 of 18
HABN_123
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
STEP 15: Secure the Control Box to the Worksurfaces using the Screws provided. Then Attach the Control Box cover to the Cross Beam.
A17f
A10
NOTE: The Power Module wire has
been Hidden for Illustration Purpose.

STEP 16b: If YEYS is specified, refer to Complement Guide COM_151b.STEP 16a: If YEYA is specified, refer to Complement Guide COM_151a.
Section:
Description: Page No:
Date:
ATTACH FELT COVER CABLE ORGANIZER
ATTACH DUAL PLASTIC TRAY CABLE MANAGEMENT
HABN_123
18 of 18
May 2022
120 HA FRAME
FRAMES AND WORKSURFACES
height-adjustable bench Installation Guides
NOTE: If YEYA is specified, refer
to Complement Guide COM_151a.
NOTE: If YEYS is specified,
refer to Complement Guide
COM_151b.