Teknion WWComplements WWCOMP HA Operating and maintenance instructions

Single-Sided Rectangular Worksurface (MHWBWBS/EHWBWBS), Single
-Sided Rectangular Worksurface w/ Radius Corners (MHWBWJS/EHWBWJS)
Single-Sided Frame(MHWBFYS/EHWBFYS) Extension Block(EHWBFWK)
Part and Product Identification
Section:
Description: Page No:
Date:
Rev. No: 0
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
Oct 2022 1 of 20
WWC_101
wwcomplements Installation Guides
A1 - Rectangular HA Wksf.
for- hiSpace W\ Rad. (C07-7611) x1
(for MHWBWJS/EHWBWJS)
OR
A2 - Access Door Asm.
(N01-4759) x1 (for both)
MHWBWBS/EHWBWBS or MHWBWJS/EHWBWJS x1
A3 - Rect. Grommet
(RAGC) x1(for both)
B -Telescopic Frame
Kit (N01-4925) x1
B1 - Telescope Frame (N01-4851)x1
B2 - Motor Housing
Cover (A16-9446) x2
B4 - Cam Handle w/
Cotter Pin. (N09-9814) x2
B3 - Wood Screw
#10x20mm
(E01-1414) x16
C1 - Frame Connecting
Tube Kit (X01-4012) x1
C2 - M8x25mm Flat Socket
Head Screw (E01-1410) x4
D3
-CableClamp
(B02-0558)x10
D4-ControlBox
W\Anti Collison
(D06-4275\650)x1
OR
(D06-4275\663)x1
D5 - Right Angle
Connector 1m Lg.
(D06-4277) x2
D6 - 3m Power
Cord (D06-4293)x1
D9 - Keypad,
hiSpace Table
(D06-4276) x1
D10- #10 x 25mm, zinc
(E01-1415) x2
D11- #4 x 25mm, zinc
(E01-1470) x4
D12- #6 x 20mm
(E01-1417) x10
E1 - YS Feet (Pair),
Hispace Table
(N09-5784) x1
A2
A3
B1
E
D1 or D2
C1
A1
NOTE:Installation for
WWComplements Europe (EU)
is same as Asia Pacific (AP).
NOTE:For WWComplements
Europe (EU) products starts
with EH and for Asia Pacific
(AP) starts with MH.
E2 - M6X14 -
SHCS
(E04-0096) x8
D1 -Leg L/R
(N01-4876) x2
OR
(N01-4852) x2
D2 -Fixed Height
Leg L/R (N01-7476) x2
D8 - Toggle
Switch Kit
(N01-7336) x1
D7 - 3m Power
Cord (I04H-0007) x1
G -Extension
block(A25-0776)
x4or32
A1 - Rectangula HA Wksf. for-
hiSpace(C07-7610) x1 (for
MHWBWBS/EHWBWBS)
C -Frame Connecting
Tube Assm
(N01-5179R/L)
x1
F2 - Base Link
Cover, SS
(A16-8546) x1
F1 - Base Link, SS
(A16-8545) x1
F3 - M6 x 16mm
Screw Chrome
(E01-1409) x4
F -Base Link
Assy
(EHWBFBS
/MHWBFBS)
A4 - M5x0.8 Pan Head
Machine Screw
E01-1106)x10
E3 - Leveler
(D06-4291) x4

STEP 2: Secure Telescope Frame Kit using Screws provided. Attach the rest of the screws to
Completely Secure the Frame as Shown above. Tighten the Set Screws after Securing the
Frames.
STEP 1: Loosen the Set Screws on the Telescopic Frame and Shorten or Lengthen the Frame
to align the Pilot holes on the Frames and Worksurfaces.
Section:
Description: Page No:
Date:
ATTACH TELESCOPE FRAME TO WORKSURFACE SECURE TELESCOPE FRAME
WWC_101
2 of 13
Oct 2022
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
B1
A1
B3
Set Screw
NOTE: Loosen the Set Screws on the
Telescopic Frame and Shorten or
Lengthen the Frame to align the Pilot
holes on the Frames and Worksurfaces.
Set Screw
Set Screw
In Europe Worsurface Machine screws are used to fasten the frame as shown
A4
A4

Section:
Description: Page No:
Date:
SECURE TELESCOPIC FRAME - 2
Oct 2022 3 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 3: Attach the rest of the screws to completely secure Telescopic Frame as shown.
B3
A4
A4
In Europe Worsurface Machine screws are used to fasten the frame as shown

Section:
Description: Page No:
Date:
ATTACH MOTOR HOUSING COVER
Oct 2022 4 of 13
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 4: Attach Motor Housing Cover to the Telescopic Frame and secure it by snapping it.
B1
B2

STEP 6A: Push legs to outerside of Worksurface.STEP 5A: Attach Legs to Telescopic Frame as shown.
Section:
Description: Page No:
Date:
ATTACH LEGS TO TELESCOPIC FRAME SECURE LEGS TO WORKSURFACE
WWC_101
5 of 20
Oct 2022
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
D1
A1
A1
D1
NOTE: Brackets will face away from
User towards back of worksurface
NOTE: D1 Leg (N01-7543) is for
Height adjustable bench (EHWBFYS)
NOTE: Attach D1- LEG (N01-4876)
for EHWBFYS (Europe version) or
attach D1- LEG (N01-4852) for
MHWBFYS (Asia-Pacific version)

STEP 6B: Push legs to outerside of Worksurface.STEP 5B: Attach Legs to Telescopic Frame as shown.
Section:
Description: Page No:
Date:
ATTACH LEGS TO TELESCOPIC FRAME SECURE LEGS TO WORKSURFACE
WWC_101
6 of 20
Oct 2022
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
NOTE: Brackets will face away from
User towards back of worksurface
D2
D2
NOTE: D2 Leg (N01-7764) is for
FIxed bench (EHWBFYS)

STEP 8: Insert pin and lock Cam Handle as shown.STEP 7: Install Cam Handle as shown. and make sure it is locked in.
Section:
Description: Page No:
Date:
INSTALL CAM HANDLE SECURE CAM HANDLE
WWC_101
7 of 20
Oct 2022
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
B4

STEP 10: Secure the Frame Connecting Tube Assembly using the Screws provided.STEP 9: Attach the Frame Connecting Tube assembly to the Brackets on the Leg Assembly.
Section:
Description: Page No:
Date:
ATTACH FRAME CONNECTING TUBE SECURE FRAME CONNECTING TUBE
WWC_101
8 of 20
Oct 2022
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
C1
C1
C2

Section:
Description: Page No:
Date:
ATTACH FEET TO LEGS
Oct 2022 9 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 11: Attach Feet to Legs with provided screws.
NOTE: Feet Installation for
07 depth configuration
NOTE: Feet Installation for
08 depth configuration
E2
E1
E2
E1

Section:
Description: Page No:
Date:
ATTACH AND SECURE CONTROL BOX
Oct 2022 10 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 12: Attach Control Box to worksurface using Screws provided.
D10
D4
NOTE: Attach D4-Control
Box(D06-4725\650) for EHWBFYS
(Europe version) or attach
D4-Control Box(D06-4725\663) for
MHWBFYS (Asia-Pacific version)

Section:
Description: Page No:
Date:
ATTACH CONNECTOR TO CONTROL BOX
Oct 2022 11 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 13: Attach the Connector Cable to Control box and to Leg as shown. Arrange the extra wire between the Telescopic Frame.
D5
D1

Section:
Description: Page No:
Date:
ATTACH SWITCH AND WIRE MANAGEMENT
Oct 2022 12 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 14A: Plug Wires and Secure Switch with screws as shown above. Make the connections. Make Sure the Anti Collision Device is attached to the Control Box.
NOTE: Make Sure the Anti- Collision
Dongle is attached to the Control Box.
Anti-Collision
Dongle
D9
D5
NOTE: Either Keypad or Toggle switch can be attached according to customer's need
NOTE: Don't have to Attach
Keypad for fixed height
(EHWBFYS2F)
D11
D6 or D7
NOTE: Attach D6- 3m Power Cord
(D06-4293) for EHWBFYS (Europe
version) or attach D7-3m Power Cord
(I04H-0007) for MHWBFYS
(Asia-Pacific version)

Section:
Description: Page No:
Date:
ATTACH SWITCH AND WIRE MANAGEMENT
Oct 2022 13 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 14B: Plug Wires and Secure Switch with screws as shown above. Make the connections. Make Sure the Anti Collision Device is attached to the Control Box.
NOTE: Either Keypad or Toggle switch can be attached according to customer's need
NOTE: Don't have to Attach
Toggle switch for fixed height
(EHWBFYS2F)
D8
D11
D6 or D7
NOTE: Attach D6- 3m Power Cord
(D06-4293) for EHWBFYS (Europe
version) or attach D7-3m Power Cord
(I04H-0007) for MHWBFYS
(Asia-Pacific version)

Section:
Description: Page No:
Date:
PLACE CABLE CLAMP
Oct 2022 14 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 15: Place Cable Clamps as shown.
D3
D12
D6
NOTE: Attach D6- 3m Power Cord
(D06-4293) for EHWBFYS (Europe
version) or attach D7-3m Power Cord
(I04H-0007) for MHWBFYS
(Asia-Pacific version)
D7

Section:
Description: Page No:
Date:
TURN THE TABLE ASSEMBLY
Oct 2022 15 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 16: Turn the Table Assembly. Please Make sure to have at least Two Persons for this Step.
NOTE: Please Make sure to have
at least Two Persons for this Step.

Section:
Description: Page No:
Date:
ROUGH LEVELING
Oct 2022 16 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 17: Ensure Bench is level. Rotate Levelers as needed to adjust height. This step will be repeated after Base Link is installed.
Level
NOTE: If the difference in floor elevation
between frames is >1-1/8" they cannot be
linked.
NOTE: If the difference in
elevation is >10mm use
Single-Sided Leveler Extension
Blocks (SOLD SEPARATELY) to
increase leveling range.

Section:
Description: Page No:
Date:
ATTACH BASE LINK ATTACH BASE LINK COVER
WWC_101
17 of 20
Oct 2022
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
STEP 18: Attach Base Link to underside of Frame Connecting Tubes and secure using
provided screws.
STEP 19: Attach the Base Link Cover to the Base Link by placing it on the bracket and
snapping in place.
F1
F3
F2

Section:
Description: Page No:
Date:
LEVELING BENCH - FINAL ADJUSTMENTS
Oct 2022 18 of 20
WWC_101
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
NOTE: It is recommended to use a laser level tool to check
final alignment.
NOTE: The unit must be levelled at the exact location of use.
STEP 20: Repeat Step 16 to ensure entire Bench is level for both Width and Depth.
Laser Level
E3

Section:
Description: Page No:
Date:
ALIGN LEVELER EXTENSION BLOCKS, EU
Oct 2022
19 of 20
WWC_101
WWCOMP HA BENCH- AP & EU
HEIGHT ADJUSTABLE BENCH
WWComplements Installation Guides
STEP 21: Assemble Extension blocks as shown
G
NOTE: Extension blocks are used if we couldn't
level the table by adjusting the leveler.
NOTE: The feet on
Single Sided
Benches allow 3/ 8"
leveleing
E3
3/ 8"

STEP 23: Secure Access Door Assembly to the Worksurface using 2 Wood Screws and Fasten
it through the Pilot Hole shown.
STEP 22: Attach Grommet and Access Door Assembly to the Worksurface.
Section:
Description: Page No:
Date:
ATTACH GROMMET AND ACCESS DOOR ASSM SECURE ACCESS DOOR ASSEMBLY
WWC_101
20 of 20
Oct 2022
WWCOMP HA BENCH - AP & EU
HEIGHT ADJUSTABLE BENCH
wwcomplements Installation Guides
A3
A2
Wood Screw