Teknion Interpret Chicago WWEPMCH User manual

Part and Product Identification
Section:
Description: Page No:
Date:
Rev. No: 1
Feb 2017 1 of 7
INT_408b
interpret
A - Interpret Single Sided Power
Tray (WWEPTS) x 1
For Customer Support please contact
[email protected]
B - Mounting Bracket Assembly
(N09-4250) x 1
C - 1/4 - 20 x 15 mm, Zinc
Murakoshi Screw (E01-0635) x 2
D - 1/4 - 20 UNC x 0.500" Cross
Head Mach Screw (E01-0110) x 4
E - Hook for plastic ERQ
(MPA25-E071) x 1
E
B
F - Chicago Power Module - Single
Sided Table (WWEPMCH) x 1
F
X03-0187
G - 8-32 3/4" Pan Head Quad
Machine Screw
(FS8-32X0.75QRZ) x 2
H -10-32 1/2" Long Pan Head Quad.
Mach. (FS10 x 32X0.50QRZ) x 2
A
NOTE: Please refer to
Installation Guide No. INT_405
for information on Power Tray.
Chicago Power Module - Single Sided Frame (WWEPMCH), Power Tray
(WWEPTS)

Section:
Description: Page No:
Date:
ATTACH BRACKET TO MODESTY
Feb 2017 2 of 7
INT_408b
interpret
B
D
STEP 1: Fasten Bracket to Modesty Panel using screws provided.

Section:
Description: Page No:
Date:
INSERT HOOK INTO BRACKET INSERT HOOK INTO BRACKET
INT_408b
3 of 7
Feb 2017
interpret
STEP 2: Insert Hook for plastic ERQ to cut out of bracket.
H
B
E
STEP 3: Slide Hook.

Section:
Description: Page No:
Date:
SLIDE TO THE RIGHT
Feb 2017 4 of 7
INT_408b
interpret
STEP 4: Insert right Hook to other cut out of Bracket and slide to the right to secure in place.
Final Position

Section:
Description: Page No:
Date:
FASTEN HOOK
Feb 2017 5 of 7
INT_408b
interpret
STEP 5: Fasten Hook to Bracket with screws provided.
H
H

Section:
Description: Page No:
Date:
POWER MODULE TO HOOK SCREW LOCATION
INT_408b
6 of 7
Feb 2017
interpret
STEP 6: Bring Power Module to Hook and fasten using screws provided.
G
F

Section:
Description: Page No:
Date:
PLUG IN BASED FEED FASTEN POWER TRAY
INT_408b
7 of 7
Feb 2017
interpret
STEP 8: Fasten Power Tray to Bracket using screws provided.
Cord from
Chicago Base Feed
C
A
NOTE: Licensed Electrician
to install Chicago Base Feed
NOTE: Please refer to
Installation Guide No. INT_405
for information on Power Tray.
STEP 7: Plug cord from Base Feed to Power Module.
NOTE: Licensed Electrician to install Chicago Base Feed