Teknion district WBP User manual

Parallelogram Height-Adjustable Worksurface (WBP),
Parallelogram Freestanding Table Mechanism for District Power Spine (YSB)
Section:
Description: Page No:
Date:
Rev. No: 0
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
Sept 2021 1 of 14
DIS_759
district Installation Guides
NOTE: Refer to COM_151b for Cable Management (YEYS).
B1
B2
D1
F
C1
A

Part and Product Identification
Section:
Description: Page No:
Date:
Rev. No: 0
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
Sept 2021 2 of 14
DIS_759
district Installation Guides
A - PARALLELOGRAM HA Worksurface
with Connection Kit for hiSpace Quick
Connect with District Spine
(WBP) x1
B - hiSpace Quick Connect HA Parallelogram
Freestanding Table Mechanism for District
Power Spine
(YSP) x1
B1 - KAIDI QI BIFMA
Range Leg
(N09-9282) x2
B2 - Cam Handle hiSpace2
(N09-9814) x2
C4 - 3M US/Canada Power Cord
(D06-4136) x1
C5 - Right Angle Connector Cable
(D06-4277) x2
C3 - Keypad, hiSpace Table
(D06-4276) x1
C6 - M5 x 20 Phillips Truss Head,
Black
(E07-0203) x 2
E - Kaidi Hardware Kit for hiSpace2
(X05-0548) x1
D - YS Feet (Pair), hiSpace Table
(N09-5784\X) x1
D1 - Foot Assembly,
hiSpace Table
(N09-5790\X) x2
C-Cable Organizer with Felt Cover hiSpace2
(N09-9975) x1
C1 - Large Cable Organizer
with Felt Cover
(N09-8069S) x 1
C2 - Control Box with
Anti-Collision, hiSpace Table
(D06-4275\663) x1
E2 - #6 x 5/8" Quad WD Screw.
(E04-0090) x 2
E1- #8 x 5/8" Quad Screw.
(E04-0091) x 2
E3 - Cable Clamp 3/8, BLK
(B02-0558) x 2
B3 - #8x1" Wood Screw
(E04-0061) x 2 D2 - M6x16, SHCS
(E04-0096) x 8
F - Vertical Wire Carrier - hiSpace Workstation
(N01-5144\16\34) x1
F1 - Vertical Wire Carrier
Worksurface Connector
(B02-0844) x1
F2 - Vertical Wire Carrier
Leg Connector
(B02-0844) x1
F3 - Vertical Wire Carrier
Assembly
(N01-6034-34) x1
F5 - #12x7/8" WD Screw
(E04-0087) x2
F6 - Cable Tie
(B02-0545) x1
F4 - Vertical Cover & Pad
Assembly
(N09-8474-16) x1

STEP 2: Push Legs towards the outer side of the Worksurface.STEP 1: Attach Legs to Worksurface by lining up with holes as shown.
Section:
Description: Page No:
Date:
ATTACH LEGS TO WORKSURFACE SECURE LEGS - 1
DIS_759
3 of 14
Sept 2021
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
B1
A
NOTE: Worksurface upside down

STEP 4: Insert Pin as shown.STEP 3: Install Cam Handles into Brackets, turning towards Leg to lock.
Section:
Description: Page No:
Date:
SECURE LEGS - 2 SECURE LEGS - 3
DIS_759
4 of 14
Sept 2021
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
B1

Section:
Description: Page No:
Date:
ATTACH FEET
Sept 2021 5 of 14
DIS_759
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 5: Attach Feet to Legs as shown using provided screws.
D1 D2

Section:
Description: Page No:
Date:
DISASSEMBLE FELT COVER
Sept 2021 6 of 14
DIS_759
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 6: Disassemble Felt Cover as shown.
NOTE: Only necessary if Cable
Organizer with Felt Cover specified.
NOTE: If Cable Organizer with Felt
Cover is not specified go to Page 9.
C1 C5

Section:
Description: Page No:
Date:
ATTACH CABLE ORGANIZER AND SWITCH. MAKE WIRE CONNECTIONS
Sept 2021 7 of 14
DIS_759
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 7: Attach the Cable Organizer and Keypad to the Worksurface. Make wire connections as shown.
NOTE: Do not over tighten when
securing to Worksurface.
E1
C3
C6
C5
B1

STEP 9: Rotate Screw Locks to secure.STEP 8: Reattach Felt Cover.
Section:
Description: Page No:
Date:
REASSEMBLE FELT COVER SECURE FELT COVER
DIS_759
8 of 14
Sept 2021
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides

Section:
Description: Page No:
Date:
WIRE MANAGEMENT - NO FELT COVER SPECIFIED
Sept 2021 9 of 14
DIS_759
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 6b: If Felt Cable Organizer is not specified, attatch the Control Box and Keypad to the Worksurface. Make wire connections as shown.
E1
C3
C5 C2
B4
C3
C4
NOTE: Do not over tighten when
securing to Worksurface.
C2
B4
C2
C4
C5
B1
C5
NOTE: Do not over tighten when
securing to Worksurface.

Section:
Description: Page No:
Date:
SECURE LOOSE WIRE
Sept 2021 10 of 14
DIS_759
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 10: Secure loose wire to the Worksurface using Cable Clamps.
E2
E3
NOTE: Do not over tighten when
securing to Worksurface.

Section:
Description: Page No:
Date:
FLIP OVER TABLE
Sept 2021 11 of 14
DIS_759
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
STEP 11: Flip over table
NOTE: Please make sure to have at least two
people for this step.

STEP 13: Insert Cable into Wire Carrier.STEP 12: Attach Worksurface Connector and Leg Connector to the Vertical Wire Carrier
Assembly.
Section:
Description: Page No:
Date:
ASSEMBLE VERTICAL WIRE CARRIER INSERT CABLE INTO WIRE CARRIER
DIS_759
12 of 14
Sept 2021
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
NOTE: Only necessary if
Vertical Wire Carrier specified.
F1
F2
F3
Cable

STEP 15: Feed Cable into the Vertical Cover & Pad Assembly before attaching the Wire Carrier
as shown and snapping in place.
STEP 14: Secure cable to the Wire Carrier using Cable Tie.
Section:
Description: Page No:
Date:
SECURE CABLE ATTACH TO COVER ASSEMBLY
DIS_759
13 of 14
Sept 2021
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
F6
F2

STEP 17: Secure Wire Carrier to underside of Worksurface using designated pilot holes.STEP 16: Attach Cover to Leg Post of Table as shown.
Section:
Description: Page No:
Date:
ATTACH TO LEG SECURE TO WORKSURFACE
DIS_759
14 of 14
Sept 2021
PARALLELOGRAM HA TABLE
HEIGHT ADJUSTABLE TABLES
district Installation Guides
NOTE: Cable hidden for illustration purposes.
NOTE: Do not over tighten when
securing to Worksurface.
F5