Teledyne ASX-560 User manual

ASX-560 / ASX-280 Autosampler
Manual Part Number 480237 Rev 3
Installation Guide for
Cytiva ÄKTA™ Systems
Use and Disclosure of Data
Information contained herein is classified as EAR99 under the U.S. Export Administration Regulations.
Export, reexport or diversion contrary to U.S. law is prohibited.

2
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
COPYRIGHT
© 2015-2023 Teledyne Technologies
Incorporated. All rights reserved.
480237 Rev 3, June, 2023
Printed in USA.
Teledyne CETAC Technologies authorizes its
customers to reproduce, transmit, or store
this document in its entirety, including this
page, for the express purpose of installing,
operating, or maintaining the product
described herein.
Teledyne CETAC Technologies
Customer Service & Support
14306 Industrial Road
Omaha, Nebraska 68144, USA
Phone [phone] (USA only)
Phone [phone]
E-mail [e-mail]
TRADEMARK ACKNOWLEDGEMENTS
ÄKTA is a trademark of Global Life Sciences
Solutions USA LLC or an affiliate doing
business as Cytiva. Cytiva is a trademark of
Global Life Sciences IP Holdco LLC or an
affiliate.
Windows is a registered trademark of
Microsoft Corporation in the United States and
other countries.
PharMed and Tygon are registered
trademarks of Saint-Gobain Performance
Plastics.
KIMWIPES is a registered trademark and
KIMTECH SCIENCE is a trademark of
Kimberly-Clark Worldwide, Inc
All other marks are the property of their
respective owners.
Overview

 
ASX-560/ASX-280 Autosampler Operator’s Manual


--
-

CHEMICAL INJURY HAZARD
The autosampler is intended for use only by qualified operators who have
been trained in safe laboratory practices. Make sure you know the hazards
associated with all of the chemicals you are using and take the appropriate
precautions. Exposure to laboratory chemicals may result in serious injury.
MECHANICAL AND ELECTRICAL HAZARDS
The autosampler has moving parts which can pinch or puncture you. The
autosampler also has electrical components which could pose a shock or
fire hazard. This Quick Installation Guide assumes that you are familiar with
autosampler safety. See the Autosampler Safety Manual (included with the
autosampler) and the Operator’s Manual (on the USB flash drive) for
notices and safety information.
WARNING

3
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
Autosampler Components
Standards Vials
Sample Vial Racks
Rinse Station
Arm
Sample Tray
Z-Drive Assembly
Power Switch
Serial Ports
USB Port
Power Connector
Z-Drive Rotor
Peristaltic Pump
Auxiliary Port
Power
Indicator Lamp

4
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
Before You Begin
 

Step 1: Choose a Location
 


ASX-560/ASX-280Operator’s Manual 
Step 2: Unpack the Autosampler
NOTICE
Do not lift the autosampler by its arm. The arm contains precision mechanical
components which may be damaged if the arm is bent or twisted.
Instead, lift the autosampler by grasping the sides of the white cover.
1
2
3


 

5
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
Step 3: Install the ASX Dashboard Software
1-



Step 4: Mount the Z-Drive
--

1-
2--
