Tempo Fitness EVOLVE User manual

TREADMILL USER’S GUIDE
FOR MODEL :
EVOLVE

3
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
CONGRATULATIONS on choosing your treadmill! You’ve taken an important step in developing and
sustaining an exercise program! Your treadmill is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your treadmill can improve the quality of your life in so many ways.
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Tempo Fitness treadmill
can help you attain it – adding quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only quality components.
You want exercise equipment that offers the most comfort, the best reliability and quality in its class.
Tempo Fitness delivers.
INTRODUCTION
Important Precautions
About Your Treadmill
Before You Begin
Treadmill Operation
Conditioning Guidelines
Troubleshooting & Maintenance
Limited Warranty
CONTACT INFORMATION
4
6
10
13
16
20
23
Back Panel
TABLE OF CONTENTS

4
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
SAVE THESE INSTRUCTIONS
Read all instructions before using this treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill. It is the
responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the
number listed on the back panel of this manual.
Connect this exercise product to a properly grounded outlet only. See grounding
instructions.
GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This product is for use on a nominal 110-volt circuit and
has a grounding plug that looks like the illustration.
This product must be used on a dedicated circuit. To
determine if you are on a dedicated circuit, shut off the
power to that circuit and observe if any other devices
lose power. If so, move devices to a different circuit.
NOTE: There are usually multiple outlets on one circuit.
It is recommended that the treadmill be used with a 15
amp circuit for optimal performance.
IMPORTANT PRECAUTIONS
WARNING
WARNING
3-Pole Grounded Outlet
GROUNDED
TREADMILL
POWER CORD
At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet.
At NO time should children under the age of 12 use the treadmill.
Children over the age of 12 should not use the treadmill without adult supervision.

5
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
To reduce the risk of burns, fire, electrical shock or injury to persons:
• Never use the treadmill before securing the safety tether clip to your clothing.
• If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness
of breath, stop exercising immediately and consult your physician before continuing.
• Do not wear clothes that might catch on any part of the treadmill.
• Always wear athletic shoes while using this equipment.
• Do not jump on the treadmill.
• Keep power cord away from heated surfaces.
• Do not insert or drop any object into any opening.
• Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)
• At no time should more than one person be on treadmill while in operation.
• The treadmill should not be used by persons weighing more than 114 kg (250 lbs). Failure to comply will
void the warranty.
• The treadmill is intended for in-home use only. Do not use this treadmill in any commercial, rental, school
or institutional setting. Failure to comply will void the warranty.
• Do not use treadmill in any location that is not temperature controlled such as but not limited to garages,
porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
• Use the treadmill only as described in this manual.
OTHER SAFETY TIPS FOR YOUR TREADMILL
OPERATION
To reduce the risk of damaging important components on your treadmill, it is strongly
recommended that your treadmill is plugged into a dedicated 15 amp circuit, without
the use of an additional extension cord and/or power strip. Failure to comply may void
the warranty.
IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.
It is essential that your treadmill is used only indoors, in a climate-controlled room. If your treadmill has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
WARNING
WARNING
CAUTION
Do not apply ANY lubricant to the folding mechanism.
This could damage it. Failure to comply may void the warranty.
Do not use ANY lubricant

6
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ABOUT YOUR TREADMILL
THERE IS NO ASSEMBLY REQUIRED FOR THIS TREADMILL!
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a protective
covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when
it is on its side. Unpack the unit where it will be used. FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN INJURY!
Before proceeding, find your treadmill’s serial number
and model name located on the stabilizer leg and enter
it in the space provided below.
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOxES BELOW:
SERIAL NUMBER:
MODEL NAME:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.

7
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
STORAGE POCKET
READING RACK
SAFETY KEY PLACEMENT
TOUCH PAD PANEL WITH LCD DISPLAY
FRONT HANDLEBAR
CONSOLE
LOCKING HANDLEBAR
RUNNING BELT / RUNNING DECK
CONSOLE MAST
LOCKING LATCH
REAR ROLLER
ADJUSTMENT BOLTS
TRANSPORT HANDLE
MOTOR COVER
SIDE RAIL
ROLLER END CAP
ON/OFF SWITCH
CIRCUIT BREAKER
POWER CORD
FOLDING HANDLEBAR
LOCK BUTTONS
STABILIZER LEGS
TRANSPORT WHEEL
STABILIZER BRACKET
(LOCATED ON UNDERSIDE OF TREADMILL)

8
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
The treadmill was folded in the carton
when purchased. Follow these steps to
unfold the treadmill.
Press and hold both LOCK BUTTONS
with your thumbs.
Carefully lift the CONSOLE MODULE
upward until it is in the upright
position. The LOCKING LATCH will
automatically engage.
Pull the LOCKING BAR upward until
it is tight.
Gently pull the FRONT HANDLEBAR
downward.
CAUTION:
Do not use the treadmill if the
LOCKING BAR is not tight.
1.
2.
3.
4.
UNFOLDING
2
1
3
4
FOLDING
4
5
3
2
1
LOCKING LATCH
Follow these steps to fold the treadmill.
Gently pull the FRONT HANDLEBAR
upward.
Pull the LOCKING BAR downward to
release the lock.
Pull LOCKING LATCH upward.
Carefully pull the CONSOLE MODULE
downward until it rests flat on the
treadmill deck.
Press down on the CONSOLE
MODULE until both locks engage.
1.
2.
3.
4.
5.

9
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
MOVING / STORAGE
This treadmill has a pair of transport
wheels built under the base frame. To
move, make sure the treadmill is folded
down and securely latched. Then, firmly
grasp the lifting handlebar, lift the
treadmill up and roll. This treadmill can
be stored horizontally (under a bed) or
vertically (against a wall).
To store underneath a bed, firmly grasp the lifting bar and
move the treadmill. Gently lower and push the treadmill
under the bed. (See illustration above)
CAUTION:
To prevent damage to the treadmill, make sure the area has
enough space to store the treadmill.
This treadmill is equipped with two STABILIZER LEGS on the front
side. To store the treadmill vertically, follow these steps:
To stand the treadmill up, pull the STABILIZER LEGS outward.
Turn the STABILIZER LEGS so they face upward.
Push the STABILIZER LEGS back in to lock them in place.
Place the treadmill close to wall with the STABILIZER LEGS
facing the wall. Carefully lift the treadmill up using the
LIFTING BAR.
Pull the STABILIZER BRACKET upward.
Rotate the STABILIZER BRACKET down all the way to the floor.
The STABILIZER BRACKET will automatically lock in place.
To put the treadmill back down, pull the STABILIZER BRACKET
towards you and rotate it upward until it locks.
Follow the steps above in reverse order to completely put the
treadmill back down.
1.
2.
3.
4.
5.
6.
7.
8.
MOVING AND STORAGE
Our treadmills can be heavy. Use care and additional help if necessary when
moving. Do not attempt to move or transport treadmill unless both the lock
latches are secured. Failure to follow these instructions could result in injury.
WARNING
1
3
STABILZER LEG
2
5
6
4
STABILZER
BRACKET
LIFTING BAR

10
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt. Place
your feet on the side rails before starting the treadmill. Start walking on the
belt only after the belt has begun to move. Never start the treadmill at a fast
running speed and attempt to jump on!
BEFORE YOU BEGIN
Your treadmill can be a tremendously effective tool for achieving your personal fitness goals. Regular use
of your treadmill can improve the quality of your life in so many ways.
HERE ARE JUST A FEW OF THE HEALTH BENEFITS OF EXERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new treadmill will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your treadmill in the comfort of your home. This guide provides you with basic
information for using and enjoying your new machine.
LOCATION OF THE TREADMILL
Place the treadmill on a level surface. There should be 6 feet of clearance
behind the treadmill, 3 feet on each side and one foot in front for folding
and the power cord. Do not place the treadmill in any area that will block
any vent or air openings. The treadmill should not be located in a garage,
covered patio, near water or outdoors.
3 feet
6 feet
3 feet
1 foot
WARNING

11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR
CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT COME
OFF YOUR CLOTHING.
WARNING
SAFETY KEY
Your treadmill will not start unless the safety key is placed in position. Attach the clip end securely to your
clothing. This safety key is designed to cut the power to the treadmill if you should fall. Check the operation of
the safety key every 2 weeks.
Do not operate the treadmill if the power cord or plug is damaged.
If the treadmill appears to not be working properly, do not use the treadmill.
PROPER USAGE
Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in
small increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When
not in use, remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow
the MAINTENANCE schedule located on page 22 in this manual. Keep your body and head facing forward. Do not
attempt to turn around or look backwards while the treadmill is running. Stop your workout immediately if you
feel pain, faint, dizzy or are short of breath.
WARNING
TURN THE POWER ON
Make sure that your treadmill is properly connected to a power outlet. The ON/OFF switch is located next to the
power cord. Flip this switch to the ON position, so that the switch is lit. You will hear a beep and the console
will turn on.

12
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
CENTERING THE RUNNING BELT
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment. Before operating the
treadmill, make sure the belt is centered and remains
centered to maintain smooth operation.
CAUTION: Do not run belt faster than 1/2 mph while
centering. Keep fingers, hair and clothing away from
belt at all times.
If the running belt is too far to the right side:
With the treadmill running at 1/2 mph, turn the right
adjustment bolt clockwise 1/4 TURN at a time (using
the supplied Allen wrench). Check the belt alignment.
Allow belt to run a full cycle to gauge if more adjustment
is needed. Repeat if necessary, until the belt remains
centered during use.
If the running belt is too far to the left side:
With the treadmill running at 1/2 mph, turn the right
adjustment bolt counter-clockwise 1/4 TURN at a time
(using the supplied Allen wrench). Check the belt
alignment. Allow belt to run a full cycle to gauge if more
adjustment is needed. Repeat if necessary, until the
belt remains centered during use.
Belt is too far to the right side
Belt is too far to the left side
TENSIONING THE RUNNING BELT
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment.
CAUTION: Running belt should NOT be moving during
tensioning. Over-tightening the running belt can
cause excessive wear on the treadmill as well as its
components. Never over-tighten the belt.
If you can feel a slipping sensation when running on the
treadmill, the running belt must be tightened. In most
cases, the belt has stretched from use, causing the
belt to slip. This is a normal and common adjustment.
To eliminate this slipping, TURN THE TREADMILL OFF
and tension BOTH THE REAR ROLLER BOLTS using the
supplied Allen wrench, turning them 1/4 TURN to the
right as shown. Turn the treadmill on and check for
slipping. Repeat if necessary, but NEVER TURN the
roller bolts more than 1/4 turn at a time. Belt is properly
tensioned when the slipping sensation is gone.

13
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
TREADMILL OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed.
LCD DISPLAY: Time, Speed, Distance and Calories.
CHANGE DISPLAY BUTTON: Press to change the feedback on the LCD display. Hold for 4-5 seconds to scan.
STOP/PAUSE: Press to pause/end your workout. Hold for 3 seconds to reset the treadmill.
START: Simply press to begin exercising or starts your program.
SPEED ARROW KEYS: Used to adjust speed in small increments (0-6 mph in 0.1 mph increments).
PROGRAM KEYS: Used to select desired program.
SAFETY KEY POSITION: Enables treadmill when safety key is inserted.
READING RACK: Holds reading material.
A)
B)
C)
D)
E)
F)
G)
H)
SAFETY KEY
START
QUICK START
HOLD TO RESET
CHANGE
DISPLAY
TIME
SPEED
DISTANCE
CALORIES
S T O P
PAUSE
SPEED
MANUAL WEIGHT
LOSS
COMPACT TREADMILL
A
F
E
H
G
C D
B
HOLD
T O
S C A N
PROGRAMS

14
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
TIME • Shown as Minutes: Seconds. View the time remaining or the time elapsed in your workout.
SPEED • Shown as KPH or MPH. Indicates how fast the walking or jogging surface is moving.
DISTANCE • Shown as Kilometers or Miles. Indicates distance traveled during your workout.
CALORIES • Total Calories burned during your workout.
MONITOR DISPLAY
CHANGE
DISPLAY
TIME
SPEED
DISTANCE
CALORIES
H O L D
T O
SCAN
Check to make sure nothing will hinder the movement of the treadmill.
Plug in the power cord and turn the treadmill ON.
Stand on the side rails of the treadmill.
Attach the safety key clip to part of your clothing.
Insert the safety key into the safety keyhole in the console.
You have two options to start your workout:
QUICK START UP
Simply press the START key to begin working out. OR...
SELECT A PROGRAM
Select a PROGRAM using the PROGRAM KEYS.
Press START to begin.
FINISHING YOUR WORKOUT
When your workout is complete, the LCD DISPLAY will flash and beep. Your workout information will stay
displayed on the console for 30 seconds and then reset.
CLEAR CURRENT SELECTION
To clear the current program selection or screen, hold the STOP button for 3 seconds.
SCAN VIEWING SCREENS
To have the display screen rotate continuously (Time, Speed, Distance and Calories), hold the CHANGE
DISPLAY button for 4-5 seconds. Press CHANGE DISPLAY again to turn off scan feature.
1)
2)
3)
4)
5)
6)
A)
B)
GETTING STARTED / SELECTING A PROGRAMGETTING STARTED / SELECTING A PROGRAM

15
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
PROGRAM INFORMATION
PROGRAM 1: MANUAL
Allows “On The Fly” manual speed changes. Time-based goal. Default time is 0:00. Range is 5:00 - 99:00.
Keeps user in their optimal fat burning zone. This is a 30 minute program.
WEIGHT LOSS PROGRAM SEGMENTS
( All segments including warm up and cool down last 60 seconds. Segments repeat.)
2:00 2:00 Segments 1-12 2:00 2:00
PROGRAM SEGMENT WARM UP 123456789101112 COOL DOWN
SPEED(MPH) 22232334433443343322
PROGRAM 2: WEIGHT LOSS

16
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN EXERCISE PROGRAM.
HOW OFTEN? (Frequency of Workouts)
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!
HOW LONG? (Duration of Workouts)
For aerobic exercise benefits, it’s recommended that you exercise for 24 to 60 minutes per session. But start
slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may be a
good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust to
the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to be
most effective. A workout time of 48 minutes or more is recommended for best weight loss results.
HOW HARD? (Intensity of Workouts)
How hard you workout is also determined by your goals. If you use your treadmill to prepare for a 5K run, you will
probably work out at a higher intensity than if your goal is general fitness. Regardless of your long-term goals,
always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial!
There are two ways to measure your exercise intensity. The first is by monitoring your heart rate (using a wireless
chest transmitter and receiver - sold separately), and the second is by evaluating your perceived exertion level
(this is simpler than it sounds!).
PERCEIVED ExERTION LEVEL
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.
Always be aware of these warning signs of overexertion.
CONDITIONING GUIDELINES

17
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
What is Target Heart Rate Zone?
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
ExAMPLE:
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Heart Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.
TARGET HEART RATE ZONE CHART
100%
75%
60%
BEATS PER MINUTE
20 25 30 35 40 45 50 55 60 65
AGE
TARGET ZONE
120 117 114 111 108105102 99 97 93
150 146 143 139135131128 124120116

18
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
STRETCH FIRST
Before using your product, it is best to take a few minutes doing a few gentle stretching exercises.
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into
each of these stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to
bounce while doing these stretches.
1. STANDING CALF MUSCLE STRETCH
Stand near a wall with the toes of your left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
2. STANDING QUADRICEP STRETCH
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
STRETCHING
TIPS

19
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
WARM-UP
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm-up should gradually bring your heart rate into your Target Heart Rate Zone.
COOL DOWN
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool-down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
An important step in developing a long-term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful exercise program. Below are some
common exercise goals:
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between high and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high-intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short-term goals are easier to achieve. Your console provides you with several readouts that can
be used to record your progress. You can track Distance, Calories or Time.
THE IMPORTANCE OF WARM-UP & COOL-DOWN
ACHIEVING YOUR FITNESS GOALS
TIPS
TIPS

20
INTRODUCTION IMPORTANT
PRECAUTIONS ABOUT YOUR
TREADMILL BEFORE
YOU BEGIN TREADMILL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
COMMON PRODUCT QUESTIONS
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new
treadmills. This noise will diminish over time, although may not totally go away. Over time, the belt will stretch,
causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I PURCHASED LOUDER THAN THE ONE AT THE STORE?
All fitness products seem quieter in a large store showroom because there is generally more background noise
than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood overlay floor.
Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness product is placed close
to a wall, there will be more reflected noise.
TROUBLESHOOTING - TREADMILL
Your treadmill is designed to be reliable and easy to use. However, if you experience a problem, please reference the
troubleshooting guide listed below.
PROBLEM: The console does not turn on and/or the belt does not move.
SOLUTION: Verify the following:
DOES THE RED LIGHT ON THE ON/OFF SWITCH LIGHT UP?
IF YES:
• Make sure treadmill is turned on.
• Double check that all connections are secure, especially the console cable. Unplug and reconnect the console
cable to verify.
• Make sure the console cable is not pinched or damaged in any way.
• Turn the power off, unplug the power cable and wait 60 seconds. Remove motor cover. Wait until all red LED lights
have gone off on the motor control board before proceeding. Next, verify that none of the wires connected to the
lower board are loose or disconnected.
IF NO:
• Verify that the outlet the machine is plugged into is functional. Double check that the breaker has not tripped, it is
on a dedicated 15 amp circuit, it is not on a GFCI-equipped outlet, and it is not plugged into a power strip/surge
protector or extension cord.
• The power cord is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position.
TROUBLESHOOTING