TEMPUR HOLCOT User manual

Product size:
King: 133cm H x 168cm W x 222cm D
Superking: 133cm H x 198cm W x 222cm
Please retain these assembly instructions for future use
HOLCOT OTTOMAN BED - Assembly Instructions
PAGE 1
KING 1100
SUPERKING 1200
Piston
Strength (N/M)
BED SIZE Min Mattress
Weight (kg)
MAX Mattress
Weight (kg)
30
35
74
88
CHECK ALL FIXING PERIODICALLY TO ENSURE THAT THEY HAVEN’T MOVED OR LOOSENED

Part A
1 x Headboard
Part B
1 x Footboard
Part C
1 x siderail Left
Part D
1 x siderail Right
Part E
1 x slat frame Right
Part F
1 x slat frame left
Part G
2 x mattress holder
Part H
2 x Joining Brackets
Part I
4 x Support Brackets
Part J
2 x bottom panel
Part K
1 x belt
a. 20 x Bolt
（M8 x 25mm）（
(12 pcs attached to
head/foot board )
b. 1x Bolt
（M8 x 80mm）
（ ） c. 8x Bolt
（M6 x 45mm）
（ ） （ ） ）
f. 1x Nut
（M8 ）
）
g. 8x Nut
（M6 x 20mm ）
h. 29 x Washer
（M8 ）
）
i. 14x Washer
（M6）
）
j. 1 x ALLEN KEY
（5# ）
）
k. 2 x ALLEN KEY
（4# ）
））
m. 1 x Spanner
（13mm）
）
Components supplied (not actual size)
HOLCOT OTTOMAN BED
PAGE 2
n. 14x Washer
（M6 ）
）
o. 21x Washer
（M8 ）
）
d. 6x Bolt
（M6 x 60mm）
e. 6x Nut
（M6 ）
I 1 x Spanner
（11mm）
(12 pcs attached to
head/foot board )
(12 pcs attached to
head/foot board )
TEMPUR

STEP 1
STEP 2
Attach the side rails to the headboard
and footboard using Allen key (k) and
bolt(a) washer(h) spring washer(o)
Note: Leave 15 mm
protruding as in the
diagram
MAKE CERTAIN THE BED IS SQUARED UP .AS SHOWN ON THE RIGHT.
Once all four comers are located. make sure the bed is still square as in the
sketch.then tighten all the bolts 100% using Allen key (K).
o x12
o x8
Use bolt (a) ,Washer (h) spring washer (o)
to fix the "L"Metal I using Allen Key (j) .
Holcot ottoman Bed
PAGE 3
o
o
j
j
j
h x8
a x8

HOLCOT OTTOMAN BED
PAGE 4
STEP 3
STEP 4
Attach the Base using bolt (b) ,Washer (h),
spring washer (0), nut(f)and Allen key (k),(m)
With each person standing either side of the bed,slide
the bottom panels down between the hinges,Slide the
panel all the way to the foot end&head end
o x1
f
o
f

HOLCOT OTTOMAN BED
STEP 5
STEP 6
PAGE 5
o x8
i
h
h
o

HOLCOT OTTOMAN BED
PAGE 6
STEP 7
STEP 8
Attach the Base using bolt (c) ,Washer (i)
,Nut (f) and Allen key (j),(l)
e
l
l
e
n x6
n

PAGE 7
HOLCOT OTTOMAN BED
○ Always engage the support bar when accessing the storage area
○ Beware of entrapment - Never reach in through the mechanism to access the storage area.
○ When engaging the ottoman support bar, ensure the slat frame/ platform base is raised to the maximum
opening extension point i.e. the uppermost height.
○ Locate the support bar from under the slat frame / platform base bracket and guide the support bar into the bracket
fixed to the bed frame.
○ When you are ready to close the ottoman, carefully locate the support bar and lift it upwards out of the
bed frame bracket and guide it back under the slat frame/platform base and secure it using the bracket provided.
○ Slowly close the ottoman slat frame / platform base

care instruction
※Avoid exposing the furniture to excessive heat or direct sunlight as this can cause
deterioration of the colour.
※To clean your items, please lightly wipe with a slightly dampened cloth.
※Never allow any kind of liquid to remain on your furniture. Absorption can cause
finishes to stain