TEMPUR Highgate Ottoman Assembly instructions

Tempur® Highgate Ottoman
Assembly Booklet

2
Welcome to your Tempur® Highgate Ottoman
bed assembly guide.
CAUTION
Register your product on the website:
https://uk.tempur.com/product-registration.html
For product use, care, and warranty details,
read the instructions on the website:
https://uk.tempur.com/quality-guarantee.html
Product is manufactured by Bed Factory Sweden OÜ,
A subsidiary of Tempur Sealy International Inc.,
Riia str 66, Viljandi, Estonia
For a safe assembly, we do not advise assembling on your own.
A minimum of 2 persons are required for a safe assembly.
The assembly instructions must be followed closely to install the bed
system successfully, safely and to minimize the risk of personal injuries
and damaging of the product.
2 x mattress bars
Assembly Guide
Component list
1 x headboard
1 x foot end panel 2 x bottom panels
2 x side panels
• All tools required for product assembly, come with the product.
• Open the packaging carefully, so not to damage any of the bed parts.
• Dispose packaging safely.
• Check all components.
2 x slatted bed frames 4 x button legs

3
Welcome to your Tempur® Highgate Ottoman
bed assembly guide.
CAUTION
Register your product on the website:
https://uk.tempur.com/product-registration.html
For product use, care, and warranty details,
read the instructions on the website:
https://uk.tempur.com/quality-guarantee.html
Product is manufactured by Bed Factory Sweden OÜ,
A subsidiary of Tempur Sealy International Inc.,
Riia str 66, Viljandi, Estonia
For a safe assembly, we do not advise assembling on your own.
A minimum of 2 persons are required for a safe assembly.
The assembly instructions must be followed closely to install the bed
system successfully, safely and to minimize the risk of personal injuries
and damaging of the product.
2 x mattress bars
Assembly Guide
Component list
1 x headboard
1 x foot end panel 2 x bottom panels
2 x side panels
• All tools required for product assembly, come with the product.
• Open the packaging carefully, so not to damage any of the bed parts.
• Dispose packaging safely.
• Check all components.
2 x slatted bed frames 4 x button legs

4
Detail view of corner connector
Components to join hinges with the frames
2 x pistons 4 x washers
4 x M6 flanged nuts 4 x M8 nuts 1 spanner
1 allen key
Components to join two inner frames
2 x joining brackets 8 x M6 nuts
8 x bolts M6 x 55mm 16 x washers
4 x bolts M6 x 50mm
Assembly steps
1. Lay all outer frame
parts on the floor, connectors
facing upside.
2.
Place one side panel to head-
board connector. See that the
hinges on the panel are on the
headboard side. Fix the panel
with placing one button leg into
corner connector. Push the leg,
no need to twist the legs. When
the bed is in the upright position,
they will be fixed in firmly. Hinges
need to be headboard side.
Follow the head and feet icons on
the cornerns. You need to
connect the corners with same
icons, feet with feet and head
with head. Follow the direction of
the icons, they need to be upright.

5
Detail view of corner connector
Components to join hinges with the frames
2 x pistons 4 x washers
4 x M6 flanged nuts 4 x M8 nuts 1 spanner
1 allen key
Components to join two inner frames
2 x joining brackets 8 x M6 nuts
8 x bolts M6 x 55mm 16 x washers
4 x bolts M6 x 50mm
Assembly steps
1. Lay all outer frame
parts on the floor, connectors
facing upside.
2.
Place one side panel to head-
board connector. See that the
hinges on the panel are on the
headboard side. Fix the panel
with placing one button leg into
corner connector. Push the leg,
no need to twist the legs. When
the bed is in the upright position,
they will be fixed in firmly. Hinges
need to be headboard side.
Follow the head and feet icons on
the cornerns. You need to
connect the corners with same
icons, feet with feet and head
with head. Follow the direction of
the icons, they need to be upright.

6
3. Connect second side panel with
headboar
d corner connector and
fix it with another butt
on leg.
4.
Turn the bed to its normal posi-
tion with tw
o people, one in one
side and another in other sid
e.
5.
Add the foot end with two
people
, both in each corner.
Connect both f
oot end corners
ont
o the side panel corner connec-
to
rs.
6. Fix the foot end by adding
legs to both corners. Push the
legs into connector. No need to
twist, the weight of the construc-
tion of the bed will fix the legs to
the end position.
7. Add bottom panels. Firstly,
install one by pushing the panel
diagonally to its position. Then
add the second panel by placing
it diagonally into opposite direc-
tion.
8. Take the two inner frames,
place them next to each other on
the floor.
The part with the holes on the
sides are the head parts.

7
3. Connect second side panel with
headboard corner connector and
fix it with another button leg.
4. Turn the bed to its normal posi-
tion with two people, one in one
side and another in other side.
5. Add the foot end with two
people, both in each corner.
Connect both foot end corners
onto the side panel corner connec-
tors.
6. Fix the foot end by adding
legs to both corners. Push the
legs into connector. No need to
twist, the weight of the construc-
tion of the bed will fix the legs to
the end position.
7. Add bottom panels. Firstly,
install one by pushing the panel
diagonally to its position. Then
add the second panel by placing
it diagonally into opposite direc-
tion.
8. Take the two inner frames,
place them next to each other on
the floor.
The part with the holes on the
sides are the head parts.

8
9. Join the two slatted frames
with the br
ackets in both ends.
Push the joining br
ackets over
the cent
er both ends. Line up
the holes on the joining br
acket
t
o the holes on the frames.
10
.Slot the M6 x 55 bolts through
the holes and fix slightly with the
domed head M6 nuts. Do it at
head and
foot end of frame. Then
adjust the f
rames next one
another if necessary
. Tighten the
bolts and nuts.
11.
Place the mattress stoppers to
head end.
12. Carefully place the inner
frames on the bed. Again, it takes
two persons to do it safely.
14. Add pistons to the both sides
of bed. While one person holds
the slatted frame up, the second
person must fit the piston to the
hinge. Connect and fix the pistons
with the hinges. You need 2
pistons and 4 M8 nuts.
13. Align the holes on the frame
with the holes on the hinge and
pass the four M6 x 50 bolts
through washers provided and
then into the holes each side of
the frame. Place a M6 nut onto
each of the M6 bolts and tighten
with fingers then then using the
Allen key provided, fully tighten
the bolts.

9
9. Join the two slatted frames
with the brackets in both ends.
Push the joining brackets over
the center both ends. Line up
the holes on the joining bracket
to the holes on the frames.
10. Slot the M6 x 55 bolts through
the holes and fix slightly with the
domed head M6 nuts. Do it at
head and foot end of frame. Then
adjust the frames next one
another if necessary. Tighten the
bolts and nuts.
11. Place the mattress stoppers to
head end.
12. Carefully place the inner
frames on the bed. Again, it takes
two persons to do it safely.
14. Add pistons to the both sides
of bed. While one person holds
the slatted frame up, the second
person must fit the piston to the
hinge. Connect and fix the pistons
with the hinges. You need 2
pistons and 4 M8 nuts.
13. Align the holes on the frame
with the holes on the hinge and
pass the four M6 x 50 bolts
through washers provided and
then into the holes each side of
the frame. Place a M6 nut onto
each of the M6 bolts and tighten
with fingers then then using the
Allen key provided, fully tighten
the bolts.

10
Check the bolts on the ottoman
action every few months to make
sure that these are properly and
firmly attached to its position.
15. Place the mattress to its
position. One person should hold
down securely the slatted section
when other is placing the
mattress.
CAUTION
CAUTION
Don’t leave the storage bed in
closed position without weight
(mattress) on top of it. Especially
don`t leave it unattended incase
you have children. The frame can
spring upwards quickly and
suddenly without the weight of
the mattress and cause injuries.